최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.28 no.3, 2011년, pp.308 - 314
권민호 (서울대학교 기계항공공학부) , 박민수 (서울과학기술대학교 제품설계금형공학과) , 신홍식 (서울대학교 기계항공공학부) , 주종남 (서울대학교 기계항공공학부)
In micro electrochemical machining (micro ECM), machining conditions have been determined to maintain a small side gap and to machine a workpiece stably However, machining speed is slow. To improve machining speed while maintaining the form accuracy, the paper investigates machining parameters such ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Sato, W., "Non-traditional Machining," Gijeonyeongusa, 1996.
Schuster, R., Kirchner, V., Allongue, P. and Ertl, G., "Electrochemical Micromachining," Science, Vol. 289, No. 5476, pp. 98-101, 2000.
Kock, M., Kirchner, V. and Schuster, R., "Electrochemical Micromachining with Ultrashort Volatges Pulses - a Versatile Method with Lithographical Precision," Electrochimica Acta, Vol. 48, No. 20-22, pp. 3213-3219, 2003.
Kim, B. H., Ryu, S. H., Choi, D. K. and Chu, C. N., "Micro Electrochemical Milling," Journal of Micromechanics and Microengineering, Vol. 15, No. 1, pp. 124-129, 2005.
Ahn, S. H., Ryu, S. H., Choi, D. K. and Chu, C. N., "Electro-chemical Micro Drilling Using Ultra Short Pulses," Precision Engineering, Vol. 28, No. 2, pp. 129-134, 2004.
Kim, B. H., Lee, Y. S., Choi, D. K. and Chu, C. N., "Taper Reduction in Micro Electrochemical Milling Using Disk-type Electrode," Journal of the KSPE, Vol. 22, No. 4, pp. 167-172, 2005.
Jeon, D. H., Kim, B. H. and Chu, C. N., "Micro Machining by EDM and ECM," Journal of the KSPE, Vol. 23, No. 10, pp. 52-59, 2006.
Park, B. J., "Effects of Tool Electrode Size on Micro Electrochemical Machining Using Ultra Short Pulses," Ph.D Dissertation, School of Mechanical and Aerospace Engineering, Seoul National University, 2006.
Rajurkar, K. P., Kozak, J. and Wei, B., "Study of Pulse Electrochemical Machining Characteristics," Annals of the CIRP, Vol. 42, No. 1, pp. 231-234, 1993.
Datta, M. and Landolt, D., "Electrochemical machining under pulsed current conditions," Electrochimica Acta, Vol. 26, No. 7, pp. 899-907, 1981.
Fernandes, S. Z., Mehendale, S. G. and Venkatachalam, S., "Influence of frequency of alternating current on the electrochemical dissolution of mild steel and nickel," Journal of Applied Electrochemistry, Vol. 10, No. 5, pp. 649-654, 1980.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.