최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국생산제조시스템학회지 = Journal of the Korean Society of Manufacturing Technology Engineers, v.20 no.2, 2011년, pp.129 - 132
김형진 (강원대학교 기계메카트로닉스공학과) , 서영호 (강원대학교 기계메카트로닉스공학과) , 김병희 (강원대학교 기계메카트로닉스공학과)
This paper presents small hydrogen regulator for the mobile fuel cell. Mobile fuel cell is generally classified into open-end type and dead-end type. In the open-end type, flow rate of hydrogen is constantly controlled, while pressure of hydrogen is constantly maintained in the dead-end type. Consid...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Voss, H., and Huff, J., 1997, "Portable Fuel Cell Power Generator," J. of Power Sources, Vol. 65, pp. 155-158.
Kim, H. G., Kim, Y. S., Yang, S. M., and Nah, S. C., 2005, "TA Study on the Performance and the Efficiency in Polymer Electrolyte Embrane Fuel Cell," J. of KSMTE, Vol. 14, No. 4, pp. 75-80.
Kim, H. G., Kang, S. S., Kwac, L. K., Song, H. Y., and Kang, Y. W., 2007, "A Study on the Performance Analysis and Design of Cathode in Fuel Cells," J. of KSMTE, Vol. 16, No. 1, pp. 75-79.
Wang, L., Husar, A., Zhou, T., and Liu, H., 2003, "Aparametric Study of PEM Fuel Cell Performance," Int. Journal of Hydrogen Energy, Vol. 28, pp. 1263-1272.
Himanen, O., Hottinen, T., and Tuurala, S., 2007, "Operation of a Planar Free-Breathing PEMFC in a Dead-End Mode," Electrochemistry Communications, Vol. 9, No. 5, pp. 891-894.
Cousseau, P., Hirschi, R., Frehner, B.,Gamper, S., and Maillefer, D., 2001, "Improved Micro-flow regulator for drug delivery systems," IEEE MEMS Conference, pp. 527-530.
Yang, B., and Lin, Q., 2007, "A Planar Compliance- Based Self-Adaptive Microfluid Variable Resistor," Journal of MEMS, Vo. 16, pp. 411-419.
Doh, I., and Cho, Y. H., 2009, "Passive Flow-Rate Regulators using Pressure-Dependent Autonomous Deflection of Parallel Membrane Valves," Lab Chip, Vol. 9, pp. 2070-2075.
Debray A., Nakakubo T., Ueda K., Mogi S., Shibata M., and Fujita H., 2005, A Passive Micro Gas Regulator for Hydrogen Flow Control," J. Micromech. Microeng. Vol. 15, pp. 202-209.
Kim, D. W., Hong, K. P., Cho, M. W., and Lee, E. S., 2010, "Mirrorlike Machining of SUS304 by Combined Process of EP and MR Polishing," J. of KSMTE, Vol. 19, No. 2, pp. 267-274.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.