최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.28 no.4, 2011년, pp.496 - 504
This paper introduces a CAE-based design procedure in the press forming process for the fabrication of sheet metal parts used in proto-cars. The finite element analysis reveals formability problems during the forming process of a floor member and a front cross member that constitute a rear floor ass...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Kim, T. Y., "Analysis of success factor to reduce the new car developing period by automobile industry," M.B.A. Dissertation, Dept. of Business Administration, Kyungpook National University, 2010.
Hill, R., "A Theory of the yielding and plastic flow of anisotropic metals," Proc. The Royal Society of London. Series A, Mathematical and Physical Sciences, Vol. 193, pp. 281-297, 1948.
ESI, "PAM-STAMP 2G User's Guide," 2009.
Altair Engineering, "Hyperform User's Manual Version 9," 2008.
Kim, S. H., Jung, D. G. and Choi, H. J., "Standard construction of CAE and evaluation processes for stamping of rear floor panel," Proc. KSPE Spring Conference, pp. 1307-1308, 2010.
Jung, D. W., Ko, H. H., Lee, C. H. and You, H. Y., "Finite element analysis of sheet metal forming process using shell element," J. Korean Society for Precision Engineering, Vol. 23, No. 1, pp. 152-158, 2006.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.