최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국안전학회지 = Journal of the Korean Society of Safety, v.26 no.6, 2011년, pp.104 - 110
권혁무 (부경대학교 시스템경영공학과) , 홍성훈 (전북대학교 산업정보시스템공학과) , 이민구 (충남대학교 정보통계학과)
In FMEA, the risk priority number(RPN) is used for risk evaluation on each failure mode. It is obtained by multiplying three components, i.e., severity, occurrence, and detectability of the corresponding failure mode. Each of the three components are usually determined on the basis of the past exper...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Agung, S. and Kwon, H., "An Expected Loss Model for Risk Prioritization in Service FMEA", California Journal of Operations Management, Vol. 8, No. 2, 27-38, 2010.
Blivband, Z., Grabov, P. and Nakar, O., "Expanded FMEA(EFMEA)", Annual Reliability and Maintainability Symposium, 31-36, 2004.
Chrysler LLC, Ford motor Company, and General Motors Corporation, FMEA Reference Manual, 4thed, 2008.
Eubanks, C. F., Kmenta, S. and Ishii, K., "Advanced FMEA Using behavior Modeling", ASME Design Engineering Technical Conference, Sacramento, California, 1-10, 1997.
Jeegadeshan, C., Arunachalam, V. P., Devadasan, S. R. and Srinivasan, P. S. S., "Design and Development of Modified Service FMEA Model", International Journal of Services and Operations Management, Vol. 3, No. 1, 111-126, 2007.
Narayanagounder, S. and Karuppusami, G., "A New Approach for Prioritizing Failure Mode in Design FMEA Using Anova", World Academy of Science, Engineering, and technology, Vol. 49, 524-531, 2009.
Oolkalkar, A. D., Joshi, A. G. and Oolkalkar, D. S., "Quality Improvement in Haemodialysis Process Using FMEA", International Journal of Quality and Reliability Management, Vol. 26, No. 8, 817-830, 2009.
Sawhney, R., Subburaman, K., Sonntag, C., Rao, P. R. V. and Capizzi, P., "A Modified FMEA Approach to Enhance Reliability In Lean Systems", International Journal of Quality and Reliability Management, Vol. 24, No. 5, 525-546, 2010.
Senol, S., "Poisson Approach to Determine the Occurrence Degree in Failure Mode and Reliability Analysis", The Quality Management Journal, Vol. 14, No. 2, 12-24, 2007.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.