$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

[국내논문] FMEA에서 시간을 고려한 기대손실모형에 기초한 위험 평가
Risk Evaluation Based on the Time Dependent Expected Loss Model in FMEA 원문보기

한국안전학회지 = Journal of the Korean Society of Safety, v.26 no.6, 2011년, pp.104 - 110  

권혁무 (부경대학교 시스템경영공학과) ,  홍성훈 (전북대학교 산업정보시스템공학과) ,  이민구 (충남대학교 정보통계학과)

Abstract AI-Helper 아이콘AI-Helper

In FMEA, the risk priority number(RPN) is used for risk evaluation on each failure mode. It is obtained by multiplying three components, i.e., severity, occurrence, and detectability of the corresponding failure mode. Each of the three components are usually determined on the basis of the past exper...

주제어

AI 본문요약
AI-Helper 아이콘 AI-Helper

* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.

문제 정의

  • Our literature survey indicated that previous techniques to estimate the RPN are neglecting the role of time horizon as key dimension to estimate the risk and still relying on qualitative basis to determine the severity of failure effects. In this study, we have presented a new model to estimate the RPN of FMEA accomplishment by considering the role of time span and loss incurred by failing to carry out the mission of an item.

가설 설정

  • To evaluate the risk of each failure mode, the expected value of its corresponding loss is obtained. In the proposed model, the expected loss of each failure mode includes the two components of FMEA, i.e. severity and occurrence, intrinsically. We then incorporate the last component of detectability into our model as the probability that every cause of a failure mode is detected before the corresponding failure actually occurs.
본문요약 정보가 도움이 되었나요?

참고문헌 (10)

  1. Agung, S. and Kwon, H., "An Expected Loss Model for Risk Prioritization in Service FMEA", California Journal of Operations Management, Vol. 8, No. 2, 27-38, 2010. 

  2. Bertolini, M., Braglia., M. and Carmignani, G., "An FMECA-based Approach to Process Analysis", International Journal of Process Management and Benchmarking, Vol. 1, No. 20, 127-145, 2006. 

  3. Blivband, Z., Grabov, P. and Nakar, O., "Expanded FMEA(EFMEA)", Annual Reliability and Maintainability Symposium, 31-36, 2004. 

  4. Chrysler LLC, Ford motor Company, and General Motors Corporation, FMEA Reference Manual, 4thed, 2008. 

  5. Eubanks, C. F., Kmenta, S. and Ishii, K., "Advanced FMEA Using behavior Modeling", ASME Design Engineering Technical Conference, Sacramento, California, 1-10, 1997. 

  6. Jeegadeshan, C., Arunachalam, V. P., Devadasan, S. R. and Srinivasan, P. S. S., "Design and Development of Modified Service FMEA Model", International Journal of Services and Operations Management, Vol. 3, No. 1, 111-126, 2007. 

  7. Narayanagounder, S. and Karuppusami, G., "A New Approach for Prioritizing Failure Mode in Design FMEA Using Anova", World Academy of Science, Engineering, and technology, Vol. 49, 524-531, 2009. 

  8. Oolkalkar, A. D., Joshi, A. G. and Oolkalkar, D. S., "Quality Improvement in Haemodialysis Process Using FMEA", International Journal of Quality and Reliability Management, Vol. 26, No. 8, 817-830, 2009. 

  9. Sawhney, R., Subburaman, K., Sonntag, C., Rao, P. R. V. and Capizzi, P., "A Modified FMEA Approach to Enhance Reliability In Lean Systems", International Journal of Quality and Reliability Management, Vol. 24, No. 5, 525-546, 2010. 

  10. Senol, S., "Poisson Approach to Determine the Occurrence Degree in Failure Mode and Reliability Analysis", The Quality Management Journal, Vol. 14, No. 2, 12-24, 2007. 

저자의 다른 논문 :

관련 콘텐츠

오픈액세스(OA) 유형

BRONZE

출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로