최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.35 no.9, 2011년, pp.1035 - 1040
송인규 (계명대학교 지능형자동차대학원) , 이영민 (한국폴리텍 VI 대학 컴퓨터응용금형과) , 신현명 (계명대학교 기계자동차공학과) , 최해운 (계명대학교 기계자동차공학과)
This research was performed on a microfilter made of a hybrid material (ceramic + metal) that was coated with ceramics on the metal-filter surface by using the thermal spray method. The ceramic powders used were 주제어
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
세라믹 필터의 단점은? | 세라믹 필터는 금속필터를 비롯한 기존의 여과 시스템과 비교하여 가벼우며 내열성, 내부식성 및 내마모성 등의 기계적 특성이 우수하고 화학적특성 및 생물학적 안정성이 높고 세척을 통한 재생이 용이하여 반영구적으로 사용이 가능한 장점을 지니고 있다. 그러나 충격에 약하고 가공성이 좋지 않는 단점도 지니고 있다.(3) 따라서 필터로써 세라믹을 널리 사용하기 위해 세라믹 재료가 지닌 특성을 충분히 살리면서도 취약점을 보완할 수 있는 금속과의 복합화가 필수적이라 할 것이다. | |
세라믹 필터의 장점은? | 세라믹 필터는 금속필터를 비롯한 기존의 여과 시스템과 비교하여 가벼우며 내열성, 내부식성 및 내마모성 등의 기계적 특성이 우수하고 화학적특성 및 생물학적 안정성이 높고 세척을 통한 재생이 용이하여 반영구적으로 사용이 가능한 장점을 지니고 있다. 그러나 충격에 약하고 가공성이 좋지 않는 단점도 지니고 있다. | |
물리적 결합의 예로 어떤 공정이 있는가? | 물리적 결합의 예로 현재 널리 사용되고 있는 세라믹 코팅 기술은 디스플레이 산업에서 ITO(indium tin oxide) 코팅을 위한 분사(sputtering), PVD(physical vapor deposition)와 같이 수 마이크로 미터 이내의 박막을 제조하는 공정이 있고, 기계 부품의 내마모성, 내식성을 위한 용사(thermal spray), 주로 금속계열의 파우더를 코팅하는 냉간 분사(cold spray), 최근 일본에서 개발되어 빠른 속도로 상용화되고 있는 분무증착(aerosol deposition) 공정 등을 볼 수 있다. 또한 브레이징(brazing), 레이저 피복 (laser cladding), 마찰교반용접(friction stir welding), 레이저 용접 등과 같은 다양한 공정이 있다.(3,4) |
Lee, J. Y., 2003, "A Study on the Removal Characteristics of Fine Dust Particles using Metal Fiber Filters," Master's Thesis.
Jo, Y. M., 2002, "Preparation and Characterization of Porous Composite Ceramic Membrane Filters for Hot Gas Cleaning," Korea Science and Engineering Foundation, p. 4.
Kim, Y. S., Nam, K. W., Kim, H. S., Oh, M.S. and Kim, K. S., 1998, "Mechanical Properties of Metal/Ceramic FGM made by Thermal Spraying Method," Journal of KSPSE, Vol. 2, No. 3, pp.41-48.
Park, D. S., Han, B. D., Choi, J. J., Yoon, W. H. and Ryu, J. H., 2007, "Technique of nanostructure Ceramic Coatings by Aerosol deposition," The Korean Ceramic Society, Ceramist, Vol. 10, No. 2, pp.7-17
Katsuaki, S., 2006, "Current Status of Joining Ceramics and Metals," The Korean Ceramic Society, Ceramist, Vol. 9, No. 2, pp.30-36
Ahn, H. S., 1991, "A Study on the Tribological Behaviours of Ceramic Coatings for Newly Application in Extreme Operating Conditions," National Research Foundation of Korea, pp.20-21.
Sulzer, M., 2006, "Thermal Spray Materials Guide".
GKN Sinter Metals (Filter-Elements / Metal Membranes), http://www. gkn-fiters.com
Kim, I. K., Lee, H. B. and Koh, Y. S., 1995, "Aluminium Titanate-Part 1," Ceramic Technology, Vol. 10, No. 1, pp. 68-75.
Kim, I. K., Lee, H. B. and Koh, Y. S., 1995, "Aluminum Titanate-Part 2," Ceramic Technology, Vol. 10, No. 3, pp. 283-288.
Jung, J. D., Lee, J. B. and Kim, J. Y., 1996, "A Study on Ash Size and its Distribution on Cleaning of Ceramic Candle Filter," The Journal of Korean Society of Mechanical Engineers, Vol. 20, No. 5, pp. 1639-1648.
Jung, J. H., 1998, "A Numerical Analysis of Reverse Cleaning Flow Characteristics in Porous Ceramic Filter System," The Journal of Korean Society of Mechanical Engineers, Vol. 2, No. 2, pp. 723-728.
Kang, K. J., Huh, B. Y. and Hyun, S. K., 2011, "Development and Trend of Cellular Metal," The Journal of Korean Society of Mechanical Engineers, Vol. 51, No. 1, pp. 32-56.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.