최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국소음진동공학회논문집 = Transactions of the Korean society for noise and vibration engineering, v.21 no.9, 2011년, pp.805 - 812
유승엽 (한양대학교 건축환경공학과) , 전진용 (한양대학교 건축공학부)
This study investigated the characteristics of heavy-weight floor impact sounds of box-frame type structure using 1:10 scale model. Ten types of floor structures(bare slabs and floating floors) were evaluated in terms of dynamic stiffness and loss factor. Floor vibrations and radiated sounds generat...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
현장 시험시공을 통한 실험적 방법은 어떤 단점이 있는가? | 바닥충격음 저감구조에 대한 성능평가는 일반적으로 현장시험 시공에 의한 실험적 방법을 통해 이뤄지고 있다. 현장 시험시공을 통한 실험적 방법은 비용, 소요시간 및 다양한 영향 요인을 포함하고 있다는 단점을 가지고 있다. 이러한 단점을 보완하기 위하여 축소모형을 이용하거나 축소시편을 활용하여 바닥구조의 구성에 따른 성능을 평가하고자 하는 연구들이 시도되고 있다. | |
일반적으로 바닥충격음 저감구조에 대한 성능평가는 어떻게 이루어지고 있는가? | 바닥충격음 저감구조에 대한 성능평가는 일반적으로 현장시험 시공에 의한 실험적 방법을 통해 이뤄지고 있다. 현장 시험시공을 통한 실험적 방법은 비용, 소요시간 및 다양한 영향 요인을 포함하고 있다는 단점을 가지고 있다. | |
일반적인 공동주택 바닥충격음 차단구조로 뜬 바닥구조(floating floor)라고도 불리는 다층 바닥구조의 시공 형태는? | 일반적인 공동주택 바닥충격음 차단구조는 210 mm 두께의 콘크리트 슬래브위에 20 mm~30 mm 두께의 완충 저감재(표준바닥구조: 동탄성 계수 40 MN/m3, 손실계수 0.1~0.3)가 시공되고 그 위에 경량 기포 콘크리트, 마감 몰탈의 단열층이 시공되는 형태로 되어 있다. 이와 같이 뜬 바닥구조(floating floor)로 불리는 다층 바닥구조에서는 중간에 삽입되는 저감재의 물성에 따라 충격음 저감특성이 결정된다. |
Park, C. Y., Hong, G. P., Lee, S. J., Kim, J. K. and Kim, K. R., 2007, Study on the Test Method of Impact Sound Pressure Level Using the Miniature Mortar, Proceedings of the KSNVE Annual Autumn Conference, pp. 1446-1449.
Sommerfeld, M., 2009, A Simplified Measurement Method for the Determination of Impact Sound Reduction, Proceedings of NAG/DAGA 2009, Rotterdam.
Song, M. J. and Kim, S. W., 1999, An Experimental Study on the Relation between VAL in Mini-laboratory and SPL in Reverberation Room - Focused on the Floor Covering PVC, Journal of the Architectural Institute of Korea(planning and design), Vol. 16, No. 1, pp. 109-116.
Kling, C., 2007, Miniaturising a Wall Test Facility, Building Acoustics, Vol. 14, No. 4, pp. 243-266.
Hopkins, C., 2007, Sound Insulation, Butterworth-Heinemann, Oxford.
Pritz, T., 2004, Frequency Power Law of Material Damping, Applied Acoustics, Vol. 65, No. 11, pp. 1027-1036.
Park, B., Jeon, J. Y. and Park, J., 2010, Force Generation Characteristics of Standard Heavyweight Impact Sources used in the Sound Generation of Building Floors, Journal of Acoustical Society of America, Vol. 128, No. 6, pp. 3507-3512.
Park, J., Kim, S. J., Park, J., Yoo, S. Y. and Jeon, J. Y., 2011, Measurements of Dynamic Properties of Concrete Structures Using Flexural Wave Propagation Characteristics, Mechanics Research Communications, Vol. 38, pp. 101-105.
Kim, J. H., Yoo, S. Y., Park, J. H. and Jeon, J. Y., 2010, Measuring Dynamic Properties of Floor Impact Isolators, Proceedings of the KSNVE Annual Spring Conference, pp. 533-534.
Kim, K. W., Jeong, G. C., Yang, K. S. and Sohn J. Y., 2009, Correlation between Dynamic Stiffness of Resilient Materials and Heavyweight Impact Sound Reduction Level, Building and Environment, Vol. 44, No. 8, pp. 1589-1600.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.