최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기소성가공 = Transactions of materials processing : Journal of the Korean society for technology of plastics, v.20 no.6, 2011년, pp.420 - 426
고세진 (현대기아자동차 연구개발총괄본부 자동차강판개발TFT) , 김태정 (현대기아자동차 연구개발총괄본부 자동차강판개발TFT) , 김익수 (현대기아자동차 연구개발총괄본부 자동차강판개발TFT)
Dent resistance is determined by both shape characteristics, i.e., local radius of curvature and sheet thickness, and material properties such as yield strength. This work presents results of a study on the effect of work hardening and bake hardening on dent resistance of aluminum alloy sheet parts ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
자동차 외판의 표면 품질을 결정하는 주요인자는? | 자동차 외판의 표면 품질을 결정하는 주요인자는 내덴트성이다. 덴트는 차량의 운행 중 혹은 주차 시에 외부와의 접촉 등으로 인해서 미세한 영구 변형이 남아 있는 경우를 말한다. | |
알루미늄 판재는 어디에 적용되는가? | 자동차 차체용 경량 재료로 가능성이 있는 금속재료는 알루미늄과 마그네슘이 있으며, 현재 알루미늄 소재가 자동차에 일부 적용되고 있다. 알루미늄 판재는 주로 후드, 트렁크리드, 도어 등의 외판 부품에 적용되며, 이러한 외판부품은 소비자의 직접적인 관찰이 가능하므로 표면 특성이 매우 중요하다. | |
덴트는 어떤 영향을 주는가? | 덴트는 차량의 운행 중 혹은 주차 시에 외부와의 접촉 등으로 인해서 미세한 영구 변형이 남아 있는 경우를 말한다. 이는 자동차 외판의 선영성에 영향을 미치므로 외관 및 중고차 가격에 큰 영향을 미친다. 자동차용 외판 부품의 내덴트성에 대한 연구는 많이 진행되었으며, 이는 재료의 항복강도 및 두께와 형상에 따른 함수로 보고되었다[1~5]. |
N. Asnafi, 1995, On strength, stiffness and dent resistance of car body panels, J. Mater. Process. Technol., Vol. 49, pp. 13-31.
G. Ekstrand, N. Asnafi, 1998, On testing of the stiffness and the dent resistance of autobody panels, Mater. Design, Vol. 19, pp. 145-156.
S. Holmberg, P. Thilderkvist, 2002, Influence of material properties and stamping conditions on the stiffness and static dent resistance of automotive panels, Mater. Design, Vol. 23, pp. 681-691.
Y. Zhang, X. Lai, P. Zhu, W. Wang, 2006, Lightweight design of automobile component using high strength steel based on dent resistance, Mater. Design, Vol. 27, pp. 64-68.
T. Kvackaj, I. Mamuzic, 2006, Development of bake hardening effect by plastic deformation and annealing conditions, METALURGIJA, Vol. 45, pp. 51-55.
L. Hong, Zhao Gang, Liu Chun-ming, Zuo Liang, 2007, Effects of different tempers on precipitation hardening of 6000 series aluminium alloys, Trans. of Nonferrous Metals Society of China, Vol. 17, pp. 122-127.
K. Dehghani, A. Nekahi, M. A. M. Mirzaie, 2010, Optimizing the bake hardening behavior of Al7075 using response surface methodology, Mater. Design, Vol. 31, pp. 1768-1775.
C. H. Shen, 2011, Pre-treatment to improve the bake-hardening response in the naturally aged Al-Mg-Si alloy, J. Mater. Sci. Techol. , Vol. 27, No. 3, pp. 205-212.
Dicellello JA et al.1974, Design criteria for the dent resistance of autobody panels, SAE, pp. 389-397.
Z. qiang, Y. Yang, 2010, Precipitation process along dislocations in Al-Cu-Mg alloy during artificial aging, Mater. Sci. and Eng.: A, Vol. 528, Issue 2, pp. 706-714.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.