최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.29 no.12, 2012년, pp.1360 - 1367
김판근 (부산대학교 기계공학부 대학원) , 박상후 (부산대학교 기계공학부)
A bending process is considered as one of fundamental sheet metal forming processes, and it is widely used for fabrication of simple or complicated sheet metal products in industrial fields. Most of automobiles and electronics have many parts made by the bending process inside or outside of them. Ho...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
굽힘 가공으로 제작되는 형상 대부분은 어디에 사용되는가? | 대부분의 굽힘 가공으로 제작되는 형상은 제품 외관에 사용되는 경우가 많다. 따라서 굽힘 가공 후 품질에 대한 요구가 많으며, 그 중에서도 스프링백 (spring back) 등에 의한 성형형상 불균일을 개선하는 문제가 대부분을 차지하며 이에 따른 많은 연구가 진행되어 왔다. | |
굽힘공정은 어떻게 분류되는가? | 굽힘공정 (bending process)은 박판 소성가공에서 가장 많이 이용되고 또한 단순한 공정으로 인식되고 있다. 굽힘공정에도 요구하는 굽힘공정에 따라 단순 굽힘 (simple bending), 형상성형 굽힘 (bottoming), 스프링백 저감을 위한 코이닝 (coining) 등으로 분류되고 형상에 따라 V 자 굽힘 (V-bending), U 자 굽힘 (U-die bending), 와이핑 (wiping die bending) 등으로 구분할 수 있다. 또한 굽힘공정으로 단순한 절곡을 만들기도 하지만 연속적으로 다단 굽힘 가공을 하여 복잡한 형상을 성형하는데 이용하기도 한다. | |
헤밍 부는 어떤 과정을 통해 생기는가? | 따라서 표면에 가공불량에 의한 돌출부 (burr)가 존재할 경우 다칠 우려가 있다. 따라서 많은 경우에 박판소재가 외관 케이스로 사용될 경우 컷팅 (cutting) 부분을 한번 접어서 컷팅에 의한 돌출부가 외관에서 보이지 않도록 한다. 이러한 것을 헤밍 (hemming)부라고 일반적으로 부른다. |
Ho, K. I. and Chang, Y. S., "A Study on the Sheet Bending by the Plastic Deformation of Flange," Trans. of KSME A, Vol. 21, No. 7, pp. 1050-1057, 1997.
Lee, S. Q. and Yang, D. Y., "An Assessment Numerical Parameters Influencing Springback in Explicit Finite Element Analysis of Sheet Metal Forming Process," J. Mater. Process. Technol., Vol. 80-81, pp. 60-67, 1998.
Chandra, A., "Real-time Identification and Control of Springback in Sheet Metal Forming," ASME J. of Eng. for Industry, Vol. 109, pp. 265-273, 1987.
Won, S. T. and Lim, K. H., "A Study on the Mechanical Properties and Bending Formability Evaluation of the Spring Strip Materials," Trans. of Mater. Proc., Vol. 15, No. 9, pp. 660-666, 2006.
Gupta, S. K. and Rajagopal, D., "Sheet Metal Bending: Forming Part Families for Generating Shared Press-Brake Setups," J. of Manuf. Syst., Vol. 21, pp. 329-350, 2002.
Kwon, Y., "A Closed Form Nonlinear Solution for Large Pure Bending Deformation of Solid Plate," J. of the KSPE, Vol. 15, No. 12, pp. 220-225, 1998.
Lee, S. B., Kim, D. H., and Kim, B. M., "Hemming Process Design of the Permalloy Shielding Can for the Stiffness and Shape Accuracy," J. of the KSPE, Vol. 19, No. 5, pp. 29-35, 2002.
Johnson, W. and Mellor, P. B., "Engineering Plasticity," Ellis Horwood, 1983.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.