최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기제어·로봇·시스템학회 논문지 = Journal of institute of control, robotics and systems, v.18 no.12, 2012년, pp.1090 - 1095
양지혁 (인하대학교 전기공학부) , 권오규 (인하대학교 전기공학부)
In this paper, we propose a model-based fault diagnosis method applied to vibration data. The fault detection is performed by comparing estimated parameters with normal parameters and deciding if the observed changes can be explained satisfactorily in terms of noise or undermodelling. The key featur...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
이상진단을 분류하시오. | 이상진단(fault diagnosis)은 이상의 유무를 판별하는 이상검출(fault detection)과 이상의 위치 또는 종류를 판단하는 이상 격리(fault isolation)로 나눠진다. 또한 사용하는 기법에 따라 신호해석기법을 사용하는 신호기반 이상진단과 시스템의 동적모델을 사용하는 모델기반 이상진단으로 구분할 수 있다. | |
신호기반 이상진단의 문제점은? | 신호기반 이상진단의 장점은 시스템의 동적모델이 필요없으며 적용기법이 개념상 간단하다는 것이다. 그러나 신뢰성이 있는 이상검출 및 진단 성능을 보여주기 위해서는 데이터량과 연산량이 많이 필요하다는 문제가 있다. | |
이상진단 알고리즘이 필수적인 이유는? | 이상진단은 안정성 및 임무 완수가 엄격하게 요구되는 비행체, 잠수함, 선박, 자동차, 발전소 등 산업계에서 중요한 역할을 해왔다. 엔진이나 발전기와 같이 핵심적인 역할을 하는 기계부품의 경우 작은 부품의 결함이 오작동 또는 대형사고를 이어질 수 있기 때문에 이상을 조기에 발견할 수 있는 이상진단 알고리즘은 필수적이다. 이상을 조기에 발견할 수 있다면 시스템의 안정성을 확보할 수 있는 것은 물론이고, 부품의 결함이 커지기 전에 교체 또는 수리함으로써 시스템 유지보수 비용을 절감할 수 있다. |
D. Doel, "An assessment of weighted-least-squares-based gas path analysis," ASME J. Eng. Gas Turbines Power, vol. 116, no. 2, pp. 366-373, Apr. 1994.
D. Doel, "Interpretation of weighted-least-squares gas path analysis results," ASME J. Eng. Gas Turbines Power, vol. 125, no. 3, pp. 624-633, Jul. 2003.
W. Janik and R. Isermann, "Signal model-based diagnosis system for the supervision of periodically and intermittant working machines tools," Proc. 11th IFAC World Congress, vol. 1, pp. 130-134, Aug. 1990.
M. Willimowski and R. Isermann, "A time domain based diagnostic system for misfire detection in spark-ignition engines by exhaust-gas pressure analysis," SAE 2000 World Congress, Detroit, United States, pp. 33-43, Mar. 2000.
D. Konig and J. F. Bohme, "Application of cyclostationary and time-frequency signal analysis to car engine diagnosis," Proc. IEEE Int Acoustics, Speech, and Signal Processing, Adelaide, Australia, pp. 33-43, Apr. 1994.
R. K. Mehra and J. Peschon, "An innovations approach to fault detection and diagnosis in dynamic systems," Automatica, vol. 7, no. 5, pp. 637-640, Sep. 1971.
E. Chow and A. Willsky, "Analytical redundancy and the design of robust failure detection systems," IEEE Transactions on Automatic Control, vol. 29, no. 7, pp. 603-614, Jul. 1984.
J. J. Gertler, "Survey of model-based failure detection and isolation in complex plants," IEEE Control Systems Magazinel, vol. 8, no. 6, pp. 3-11, Dec. 1988.
R. Isermann and B. Freyermuth, "Process fault diagnosis based on process model knowledge," Journal of dynamic systems, measurement, and control, vol. 113, no. 4, pp. 58-65, 1991.
J. W. Bird and H. M. Schwartz, "Diagnosis of turbine engine transient performance with model-based parameter estimation techniques," Proc. International Gas Turbine and Aeroengine Congress and Exposition, Hague, Netherlands, pp. 1-8, Jun. 1994.
J. Chen and R. J. Patton, Robust model-based fault diagnosis for dynamic systems, Kluwer academic publishers, 1989.
T. Kobayashi and D. L. Simon, "Evaluation of an enhanced bank of Kalman filters for in-flight aircraft engine sensor fault diagnostics," ASME J. Eng. Gas Turbines Power, vol. 127, pp. 497-504, 2005.
R. Isermann, Fault-Diagnosis Systems, Springer, New York, 2006.
S. X. Ding, Model-based fault diagnosis techniques: design schemes, algorithms, and tools, Springer, New York, 2008.
A. Shui, W. Chen, P. Zhang, S. Hu, and X. Huang, "Review of fault diagnosis in control systems," Proc. Chinese Control and Decision Conf., Chongqing, China, pp. 5324-5329, Jun. 2009.
M. Witczak, Modelling and Estimation Strategies for Fault Diagnosis of Non-Linear Systems: from analytical to soft computing approaches, Springer, New York, 2007.
R. A. Collacott, Vibration Monitoring and Diagnosis, John Wiley & Sons, London, 1979.
K. Shanlin, L. Baoshe, F. Feng, and S. Songhua, "Vibration fault detection and diagnosis method of power system generator based on wavelet fractal network," Control Conference, China, pp. 520-524, Jun. 2007.
Y.-H. Kim, "The study on the test on initial abnormal engine through processing signal," Master's thesis, Hanyang university, 2010.
G. Betta, C. Liguori, A. Paolillo, and A. Pietrosanto, "A DSP-based FFT-analyzer for the fault diagnosis of rotating machine based on vibration analysis," Instrumentation and Measurement, IEEE Transactions on, vol. 51, no. 6, pp. 572-577, May 2001.
Y. Zhang, S. Huang, W. Gao, and T. Shen, "Vibration fault diagnosis of steam turbine shafting based on probability neural networks," Image and Signal Processing, CISP'08, Sanya, China, pp. 582-585, May 2008.
O. K. Kwon and G. C. Goodwin, "A fault detection method for uncertain systems with unmodelled dynamics, linearization errors and noisy inputs," Proc. 11th IFAC World Congress, pp. 68-73, Aug. 1990.
O. K. Kwon, G. C. Goodwin, and W. H. Kwon, "Robust fault detection method accounting for modelling errors in uncertain systems," Control Engineering Practice, vol. 2, no. 5, pp. 763- 771, Oct. 1994.
D.-W. Kim, W.-K. Son, and O.-K. Kwon, "Fault tolerant control for remotely piloted vehicle," Journal of Control, Automation and Systems Engineering, vol. 5, no. 6, pp. 683-690, Aug. 1999.
O.-K. Kwon, D.-W. Kim, and Y.-S. Kim, "Robust on-line fault detection method for boiler systems," Journal of Control, Automation and Systems Engineering (in Korean), vol. 5, no. 1, pp. 16-24, Jan. 1999.
G. Merrington, O. K. Kwon, G. C. Goodwin, and B. Carlsson, "Fault detection and diagnosis in gas turbines," ASME J. Eng. Gas Turbines Power, vol. 113, no. 2, pp. 276-282, Jan. 1991.
J. H. Yang and O. K. Kwon, "Model-based engine fault diagnosis using vibration data," 14th Australian International Aerospace Congress, Melbourne, Australia, Mar. 2011.
S. Abe, Support vector machines for pattern classification, Springer, New York, 2010.
L. Shuang and L. Meng, "Bearing fault diagnosis based on PCA and SVM," Proc. Int. Conf. Mechatronics and Automation, pp. 3503-3507, Aug. 2007.
J. Qu and M. J. Zuo, "SVM-Based prognosis of machine health condition," Proc. 2010 International Conference on Mechanical, Industrial, and Manufacturing Technologies, 2010.
A. Bjorck., Numerical methods for least squares problems, Society for Industrial Mathematics, 1996.
S. G. Johnson and M. Frigo, "A modified split-radix FFT with fewer arithmetic operations," Signal Processing, IEEE Transactions on, vol. 55, no. 1, pp. 111-119, Jan. 2007.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.