최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.36 no.2, 2012년, pp.137 - 148
김지수 (고려대학교) , 김주희 (고려대학교) , 배홍열 (고려대학교) , 오창영 (고려대학교) , 김윤재 (고려대학교) , 이경수 (한국수력원자력(주)) , 송태광 (한국원자력안전기술원)
In pressurized water nuclear reactors, dissimilar metal welds are susceptible to primary water stress corrosion cracking. To access this problem, accurate estimation of welding residual stresses is important. This paper provides general welding residual stress profiles in dissimilar metal nozzle but...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
노즐 맞대기 용접부는 어떻게 구성되는가? | 반면 노즐 맞대기 용접부는 Fig. 1(b)와 같이 노즐과 안전단(Safe End)을 이어주는 이종금속용접부와 안전단과 배관을 이어주는 동종금속용접부로 구성되어 있으며 각각의 구성부에는 다른 특성의 재료가 사용된다. 최근 연구 결과, 동종금속용접이 이종금속용접부의 잔류응력분포에 영향을 미치며 안전단의 길이 변화에 따라서 이종금속용접부 내면의 잔류응력이 변하는 것으로 알려져 있다. | |
유럽과 미국 등 세계의 여러 가압경수로에서 어떤 문제가 발생하고 있는가? | 최근 유럽과 미국 등 세계의 여러 가압경수로 (Pressurized Water Reactor)에서는 니켈 기조 합금인 인코넬 alloy 600 계열의 노즐 맞대기 이종금속용 접부에서 발생한 균열로 인해 냉각수가 누출되는 사고가 발생하고 있다. (1~3) 이 균열들의 특징을 살펴보면 운전기간이 20 년 이상 된 노후화된 가압 경수로의 이종금속용접부(Dissimilar Metal Weld)에서 발생한다는 공통점이 있다. | |
세계의 여러 가압경수로에서 발생하는 노즐 맞대기 이종금속용 접부의 균열은 어떤 공통점이 있는가? | 최근 유럽과 미국 등 세계의 여러 가압경수로 (Pressurized Water Reactor)에서는 니켈 기조 합금인 인코넬 alloy 600 계열의 노즐 맞대기 이종금속용 접부에서 발생한 균열로 인해 냉각수가 누출되는 사고가 발생하고 있다. (1~3) 이 균열들의 특징을 살펴보면 운전기간이 20 년 이상 된 노후화된 가압 경수로의 이종금속용접부(Dissimilar Metal Weld)에서 발생한다는 공통점이 있다. 국내에서도 1980 년대부터 가동중인 가압경수로들이 노후화 됨에 따라 일차수응력부식균열 평가가 중요 안전 현안으로 부각되고 있다. |
EPRI, 2004, "Materials Reliability Program: Welding Residual and Operation Stresses in PWR Alloy 182 Butt Welds (MRP-106), EPRI Report
Moffat, G., Bamford, W. H. and Seeger, D., 2001, "Development of the Technical Basis for Plant Startup for the V.C Summer Nuclear Plant," Trans. of ASME PVP conference, PVP-Vol. 427, pp.33-39
Kim, J.S., Jin, T.E., Dong, P. and Prager, M., 2003, "Development of Residual Stress Analysis Procedure for Fitness-For-Service "Assessment of Welded Structure," Trans of the KSME(A), Vol. 27, pp.713-723
Brust, F.W. and Scott, P. M., 2007, "Weld Residual Stresses and Primary Water Stress Corrosion Cracking in Bimetal Nuclear Pipe Welds," Proc. ASME PVP, PVP2007-26297.
ABAQUS (2007) ABAQUS Standard/User's Manual, Version 6.7. Dassault Systemes Inc.
Brickstad, B. and Josefson, B. L., 1998, "A Parametric Study of Residual Stresses in Multi-Pass Butt-Welded Stainless Steel Pipes," International Journal of Pressure Vessels and Piping, Vol. 75, pp. 11-25.
Yaghi, A., Gyde, T. H., Becker, A. A., Sun, W. and Williams, J. A., 2006, "Residual Stress Simulation in Thin and Thick-Walled Stainless Steel Pipe Welds Including Pipe Diameter Effects," International Journal of Pressure Vessels and Piping, Vol. 83, pp. 864-874.
Dong, P. and Zhang, J., 1999, "Residual Stresses in Strength-Mismatched Welds and Implications on Fracture Behavior," Engineering Fracture Mechanics, Vol. 64, pp. 485-505.
Bouchard, P. J., 2008, "Validated Residual Stress Profiles for Fracture Assessments of Stainless Steel Pipe Girth Welds," International Journal of Pressure Vessels and Piping, Vol. 84, pp. 195-222.
R6, Revision 4: Assessment of the Integrity of Structures Containing Defects, 2006, British Energy Generation Ltd, Gloucester, UK.
API 579-1/ASME FFS-1, 2007, "Fitness-for-Service for Pressure Vessels, Piping and Storage Tanks," American Petroleum Institute/American Society of Mechanical Engineers.
ASME Sec. XI Task Group for Piping Flaw Evaluation, 1986, "Evaluation of Flaws in Austenitic Steel Piping," Journal of Pressure Vessel Technology, 108(3), pp.352-366
Rudland, D., Zhang, T., Wilkowski, G. and Csontos, A, 2008, "Welding Residual Stress Solutions for Dissimilar Metal Surge Line Nozzles Welds," Proc ASME PVP, PVP2008-61285.
Ogawa, N., Muroya, I., Iwamoto, Y., Hojo, K., Ogawa, K., Kinston, E. and Smith, D. J, 2009, "Residual Stress Evaluation of Dissimilar Weld Joint Using Reactor Vessel Outlet Nozzle Mock-up Model (report-2)," Proc ASME PVP, PVP2009-77269.
Song, T.K., Bae, H.Y., Chun, Y.B., Oh, C.Y., Kim, Y.J., Lee, K.S. and Park, C.Y., 2008, "Estimation of Residual Stress Distribution for Pressurizer Nozzle of Kori Nuclear Power Plant Considering Safe End," Trans of the KSME(A), Vol. 32, pp. 668-677.
Song, T.K., Chun, Y.B., Oh, C.Y., Bae, H.Y., Kim, Y.J., Lee, S.H., Lee, K.S., Park, C.Y., 2009, "Effect of Similar Metal Weld on Residual Stress in Dissimilar Metal Weld According to Safe End Length," Trans of the KSME(A), Vol. 33, pp. 664-672.
Cofie, N. G., Dijamco, D. G., Limpus, C. R., Cirilli, J. J., Malikowski, H. M. and Roberts, A. T., 2006, "Residual Stress Analysis of a Bimetallic Weld Subjected to Stress Improvement and Weld Overlay Repair," Proc. ASME PVP, PVP2006-ICPVT-11-93455.
Dennis, R. J., Leggatt, N. A. and Gregg, A., 2006, "Optimization of Weld Modeling Techniques-Beadon-Plate Analysis," Proc. ASME PVP, PVP2006-ICPVT-11-93907.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.