최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓造船學會 論文集 = Journal of the society of naval architects of korea, v.49 no.1, 2012년, pp.33 - 44
이준채 (서울대학교 조선해양공학과 대학원) , 차주환 (목포대학교 해양시스템공학과) , 노명일 (울산대학교 조선해양공학부) , 황지현 (서울대학교 조선해양공학과 대학원) , 이규열 (서울대학교 조선해양공학과 및 해양시스템공학연구소)
In this study, the optimal operating conditions for the dual mixed refrigerant(DMR) cycle were determined by considering the power efficiency. The DMR cycle consists of compressors, heat exchangers, seawater coolers, valves, phase separators, tees, and common headers, and the operating conditions in...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
LNG-FPSO의 역할은? | 이러한 LNG-FPSO는 유정(well, 오일과 가스가 존재하는 심해광구)에서 올라오는 오일, 가스, 물의 혼합물 중 가스(light hydrocarbon 성분)를 분리한 후 불순물(H2O, N2, CO2, H2S)을 허용 기준 이하로 제거하여 저장한다. 이때 천연 가스(NG: Natural Gas)를 액화하여 부피가 약 1/600 인 액화 천연 가스(LNG: Liquefied Natural Gas) 상태로 저장한다(Cha, et al. | |
천연 가스 액화 공정 사이클은 어떤 기준으로 분류되는가? | Table 1은 천연 가스 액화 공정 사이클을 크게 3가지 기준에 따라 분류한 것이다. 3가지 분류 기준에는 크게1) 사이클의 개수, 2) 터빈(turbine) 사용 유무, 3) 혼합 냉매(mixed refrigerant)사용 유무가 있다. 우선, ‘1) 사이클의 개수’는 액화 공정 사이클에서 천연 가스를 예냉각(precooling), 액화(liquefaction), 과냉각 (subcooling)할 때, 이들이 몇 개의 작동 냉매에 의해 수행되는지를 나타낸다. | |
DMR Cycle은 어떻게 구성되는가? | DMR Cycle은 Fig. 1에 나타나 있듯이 해수를 이용한 냉각기(Sea Water(SW) cooler로 열 교환기의 일종) 2개와 3개의 압축기(compressor), 4 개의 열 교환기(heat exchanger) 그리고 5개의 밸브(valve) 및 2개의 상 분리기(phase separator)로 구성된다. DMR 사이클은 Table 1에 나타나 있듯이 2 사이클에 해당하며, 팽창기가 아닌 팽창 밸브를 사용한다. |
AspenTech, 2011. HYSYS official homepage, Available at http://www.aspentech.com/core/aspen-hysys.cfm [Accessed 1 June 2011].
Barclay, M. & Shukri, T., 2007. Enhanced Single Mixed Refrigerant Process for Stranded Gas Liquefaction. LNG 15 Conference, Barcelona, Spain, 24-27 April 2007.
Cengel, Y.A., 2008. Introduction to Thermodynamics and Heat Transfer. 2nd Edition, McGraw-Hill.
Finn, A.J. Johnson, G.L. & Tomlinson, T.R., 2000, LNG Technology for Offshore and Midscale Plants", 79th Annual GPA Convention, Atlanta, U.S.A., 13-15 March 2000.
Hwang, J.H. et al., 2009. Application of an Integrated FEED Process Engineering Solution to Generic LNG FPSO Topsides. Proceedings of the Nineteenth International Offshore and Polar Engineering Conference, Osaka, Japan, 21-26 June 2009.
Jensen, J.B., 2008. Optimal Operation of Refrigeration Cycles. Ph.D. Thesis, Norweglan University of Science and Technology.
Kim, H.J. Park, C.K. Lee, J.Y. & Kim, W.B., 2010. Optimization of the Degree of Superheating of the Cryogenic Liquefaction Process for LNG FPSO. Proceedings of the Annual Spring Meeting, The Society of Naval Architects of Korea, Jeju, Korea, 3-4 June 2010.
Lee, K.Y. Cho, S.H. & Roh, M.I., 2002. An Efficient Global-Local Hybrid Optimization Method Using Design Sensitivity Analysis. International Journal of Vehicle Design, 28(4), pp.300-317.
Lee, J.Y. Kim, W.B. Kim, H.J. & Park, C.K., 2010. Comparison of a Ship LNG Liquefaction Plant and a Large Size LNG Liquefaction Plant. Proceedings of the Annual Spring Meeting, The Society of Naval Architects of Korea, Jeju, Korea, 3-4 June 2010.
Moran, M.J. & Shapiro, H.N., 2008. Fundamentals of Engineering Thermodynamics, 6th Edition, John Wiley & Sons.
Roh, M.I. & Lee K.Y., 1999. A Study on the Multidisciplinary Design Optimization(MDO) using Collaborative Optimization Approach. Proceedings of the Annual Autumn Meeting, The Society of Naval Architects of Korea, Daejeon, Korea, 11-12 November 1999.
Shukri, T., 2004. LNG Technology Selection. Hydrocarbon Engineering, 9(2), pp.71-74.
Smith, J.M., 2005. Introduction to Chemical Engineering Thermodynamics, 7th Edition, McGraw-Hill.
Venkatarathnam, G., 2008. Cryogenic Mixed Refrigerant Processes, Springer.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.