최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.36 no.4, 2012년, pp.429 - 435
김영득 (포항공과대학교 기계공학과) , 김창완 (건국대학교 기계설계학과) , 박현철 (포항공과대학교 기계공학과)
An abrasion due to continuous friction between a work roll and strip causes the mass of the work roll to be unbalanced in the rolling process. We developed a mathematical model for the rolling mill considering the unbalanced mass and verified the model experimentally. The work roll was approximated ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
압연공정 중에 작업롤은 스트립과의 지속적인 마찰에 의해 무엇이 발생되는가? | 압연공정 중에 작업롤은 스트립과의 지속적인 마찰에 의해 마모가 발생하여, 질량 불평형이 발생하게 된다. 이러한 작업롤의 질량 불평형을 고려한 압연기의 수학적 모델을 제안하였고, 이 모델은 실험에 의해 검증되었다. | |
채터 진동은 어떻게 발생하는가? | 채터 진동이란 소재와 제조장치간의 급격한 기계적인 진동으로 인해 발생하는 현상이며, 예전에는 주로 밀링 및 연삭 등의 절삭 가공에서 주로 나타나는 현상이었다. 하지만 최근에 더 엄격한 품질의 압연제품의 수요와 요구로 인해 품질에 대한 규격이 엄격해지며, 압연 공정에 있어서도 채터 진동으로 인한 문제가 크게 대두되고 있는 실정이다. | |
채터 진동이 발생되는 원인은 무엇인가? | 채터 진동이 발생하면, 이러한 마크가 완성품의 외관에 선명하게 드러나 소비자의 불만을 야기한다. 채터의 발생 원인으로 압연 롤의 불균형과 편심, 기계 조립 부위의 이완, 미스얼라인먼트, 롤 슬립, 기어 구동부 및 베어링 손상 등의 기계적 요인을 생각할 수 있다. 채터 진동이 심하게 발생하는 경우 압연기 자체의 구조와 공진을 일으켜 높은 소음을 동반하고 작업 환경을 저해하는 요인이 된다. |
Lee, C., 1999, The study on chatter mechanism and friction induced self-excited vibration in the rolling system, Master's thesis, Department of Iron & Steel Technology, Graduate School of Iron & Steel echnology: Pohang University of Science and Technology, pp.6-16.
Jun, H., Lee, J. and Lee, S., 1995, "Chatter Vibration in Hot Strip Finishing Mills," Trans. of the KSME (A), Vol. 35, No. 5, pp. 414-426.
Son, B., Roh, Y. and Lee, Y., 1994, "The Cause of Vibration at Finishing Stands in a Hot Strip Mill," Korean Society for Noise and Vibration Engineering, Vol. 4(1), pp. 43-50.
Mehrabi, R., Silani, M., Ziaei-Rad, S., Salimi, M. and Kamranian, A., 2008, "Investigation of Influences of Operational Parameters on Chatter Vibration of Cold Rolling Machines Using Finite Element Method," Metal Forming, Vol. 1, pp. 467-474.
Johnson, R.E. and Qi, Q., 1994, "Chatter Dynamics in Sheet Rolling," Int. d. Mech. Sci.,Vol. 36(7), pp. 617-630.
Swiatoniowski, A. and Bar, A., 2003, "Parametrical Excitement Vibration in Tandem Mills-Mathematical Model and Its Analysis," J. Mater. Process. Technol. Vol. 134(2), pp. 214-224.
Bar, A. and Swiatoniowski, A., 2004, "Interdependence Between the Rolling Speed and Non-Linear Vibrations of the Mill System," J. Mater. Process. Technol. Vol. 155-156, pp. 2116-2121.
Ginzburg, V. B. and Ballas, R., 2000, Flat Rolling Fundamentals, MARCEL DEKKER, pp. 381-387.
Kim, Y., Park, H., Lee, S. and Kim, C., 2011, "Development of a Mathematical Model for the Prediction of Vibration in a Cold Rolling Mill Including the Driving System," ISIJ International, accepted.
Kim, J. S., 2003, A Study on the Active Balancing System for High-Speed Rotating Machinery, Doctor's Thesis, Department of Mechanical Engineering, The Graduate School of Ajou University, Suwon, pp. 13-17.
Theodossiades, S. and Natsiavas, S., 2000, "Non-Linear Dynamics of Gear-Pair Systems with Periodic Stiffness and Backlash," Journal of Sound and Vibration, Vol. 229, pp. 287-310.
Theodossiades, S. and Natsiavas, S., 2001, "Periodic and Chaotic Dynamics of Motor-Driven Gear-Pair Systems with Backlash," Chaos, Solitons & Fractals Vol. 12, pp. 2427-2440.
Craig Jr., R.R. and Kurdila, A.J., 2006, Fundamentals of Structural Dynamics., JOHN WILEY & SONS, INC., pp. 500-514.
Bathe, K., 1996, Finite Element Procedures, Prentice Hall, pp.768-782.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.