최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Korean chemical engineering research = 화학공학, v.50 no.1, 2012년, pp.6 - 10
김두병 (로드 씰(주)) , 이대우 (전북대학교 화학공학부) , 김종석 (전북대학교 화학공학부)
The main objective of this work was studying the influence of paraffin oil(PO) on the adhesion properties at low temperature in styrene-butadiene-styrene(SBS) copolymer and crumb rubber(CR) modified asphalt. The temperature susceptibility of SBS/CR asphalt and PO/SBS/CR/asphalt blends were measured ...
Takamura, K., "Methods of Rejuvenating Road Surfaces with Polymer Modified asphalt Emulsion," US Patent 7357594 (2008).
Freeman, R. B. and Johnson, D., "Cost Effectiveness of Crack Sealing Materials and Techniques for Asphalts Pavement," FHWA/ MT-98-007/8127, Western Trans. Inst., Montana State University, Bozeman, Mont.(1999).
Harvey, J. A. F. and Cebon, D., "Fracture Tests on Bitumen Films," J. Mater. Civil Eng., 17, 99 (2005).
Lee, S. J., Amirkhanjan, S. N., Putman, B. J. and Kim, K. W., "Laboratory Study of the Effects of Compaction on the Volumetric and Rutting Properties of CRM asphalt Mixtures," J. Mater. Civil. Eng., 19, 1079(2007).
K. J. O and Kim, J. S., "Influence of Processing Conditions on the Physical Properties of Crumb Rubber Modified Asphalts," J. Korean Soc. Road Eng., 10, 239(2008).
Kim, J. S., "Influence of a Flexibilizer on Physical Properties of Crumb Rubber Modified Asphalt Sealants," Journal of Korean Society Road Engineers., 11, 33(2009).
Kraus, G., "Modification of Asphalt by Block Polymer of Butadiene and Styrene," Rubber Chem. Technol., 55, 1389 (1982).
Morrison, G. R. and Hesp, S. A. M., "A New Look at Rubber Modified Asphalt Binders," J. Mater. Sci., 30, 2584(1995).
Kim, G. and Libera, M., "Morphological Development in Solvent Cast Polystyrene-polybutadiene-polystyrene (SBS) Triblock Copolymer Thin Films," Macromolecules, 31, 2569(1998).
Blanco, R., Rodriguez, R., Garcia-Garduno, M. and Castano, V. M., "Rheological properties of Styrene-butadiene Copolymer Reinforced Asphalt," J. Appl. Polym. Sci., 61, 1493 (1996).
Hernandez, G., Medina, E. M., Sanchez, R. and Mendoza, M., "Thermomechanical and Rheological Asphalt Modification Using Styrene-butadiene Triblock Copolymers with Different Microstructure," Energy Fuels., 20, 2623(2006).
ASTM D5-06, Standard test method for penetration of bituminous materials(2006).
Pfeiffer, J. P. and Doormaal, P. M., "The Rheological Properties of Asphaltic Bitumen," Journal of the Institute of Petroleum Technologists, 22, 414(1936).
ASTM D36-06, Standard Test Method for Softening Point of Bitumen (ring-and-ball apparatus)(2006).
ASTM D-5329-07, Standard test methods for sealants and fillers, hot applied, for joints and cracks in asphaltic and portland cement concrete pavements(2007).
Morrison, G. R., Lee, J. K. and Hesp, S. M., "Chlorinated Polyolefin for Asphalt binder Modification," J. Appl. Polym. Sci., 54, 234(1994).
Gawel, I., Stepkowski, R. and Czechowski, F., "Molecular Interactions Between rubber and Asphalt," Ind. Eng. Chem. Res., 45, 3044(2006).
Yamaguchi, D., Cloitre, M., Panine, P. and Leibler, L., "Phase Behavior and viscoelastic Properties of Thermoplastic Elastomer Gels Based on ABC Triblock copolymers," Macromolecules, 38, 7798(2005).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.