참고문헌 (16)

1. Cherian, A. B. and Thachil, E. T., "Block Copolymers of Unsaturated Polyesters and Functional Elastomers," J. Appl. Polym. Sci., 94(5), 1956-1964(2004). 

   상세보기

2. Atkins, K. E., Sheet Molding Compound: Science and Technology, Chapter 4, H. G. Kia, ed., Hanser Publishers, New York(1993). 

3. Brady, M. and Brady, P, "Automotive Composites: Which Way Are We Going?," Reinforced Plastics(2007). 

4. Kalny, O., Peterman, R. J. and Ramirez, G., "Performance Evaluation of Repair Technique for Damaged Fiber-reinforced Polymer Honeycomb Bridge Deck Panels," J. Bridge Eng., 9, 75-86(2004). 

   상세보기

5. Vivek Patel, "Opportunity for Composite Materials in India: Sheet Molding Compound (SMC) Industry," 20(2010). 

6. Li, W. and Lee, L. J., "Shrinkage Control of Low-profile Unsaturated Polyester Resins Cured at Low Temperature," Polym. J., 39, 5677-5687(1998). 

   상세보기

7. Lucas, J. C., Borrajo, J. and Williams, R. J., "Cure of Unsaturated Polyester Resins: 2. Influence of Low-profile Additives and Fillers on the Polymerization Reaction, Mechanical Properties and Surface Rugosities," Polym. J., 34, 1886-1890(1993). 

   상세보기

8. Li, W. and Lee, L. J., "Low Temperature Cure of Unsaturated Polyester Resins with Thermoplastic Additives III. Modification of Polyvinyl Acetate for Better Shrinkage Control," Polym. J., 41, 711-717(2000). 

   상세보기

9. Haider, M. et al., "Cure Shrinkage Characterization and Modeling of a Polyester Resin Containing Low Profile Additives," Compos. Pt. A 38, 994-1009(2007). 

   상세보기

10. Pegoretti, A., Ashkar, M., Migliaresi, C. and Marom, G., "Relaxation Processes in Polyethylene Fiber-reinforced Polyethylene Composites," Compos. Sci. Technol., 60, 1181-1189(2000). 

    상세보기

11. Huang, Y. J. and J. S. Leu, "Curing of Unsaturated Polyester Resins. Effect of Temperature and Initiator: 1. Low Temperature Reactions," Polym. J., 34, 295-304(1993). 

    상세보기

12. Zhang, Z. and Zhu, S., "Microvoids in Unsaturated Polyester Resins Containing Poly(vinyl acetate) and Composites with Calcium Carbonate and Glass Fibers," Polym. J., 41, 3861-3870(2000). 

    상세보기

13. Huang, Y. J. and Su, C. C., "Effects of Poly(vinyl acetate) and Poly(methyl methacrylate) Low-profile Additives on The Curing of Unsaturated Polyester Resins II. Morphological Changes during Cure," J. Appl. Polym. Sci., 55, 323-342(1995). 

    상세보기

14. Lee, D. S. and Han, C. D., "Effect of The Chemical Structure of Low-profile Additives on The Curing Behavior and Chemorheology of Unsaturated Polyester Resin," Poly Eng Sci., 27, 964-975(1987). 

    상세보기

15. Yang, Y. S. and Suspene, L., "Curing Unsaturated Polyester Resins: Viscosity Studies and Simulations in Pre-gel State," Poly Eng Sci., 31, 321-332(1991). 

    상세보기

16. Cao, X. and Lee, L. J., "Control of Shrinkage and Residual Styrene of Unsaturated Polyester Resins cured at Low Temperatures: I. Effect of Curing Agents," Polym. J., 44, 1893-1902(2003). 

    상세보기

저자의 다른 논문 :

이상구 (8) 윤홍진 (2) 이종대 (75)