최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기전기학회논문지 = The Transactions of the Korean Institute of Electrical Engineers, v.61 no.5, 2012년, pp.753 - 756
김재붕 (전북대학교 전자공학부) , 조성익 (전북대학교 전자공학부)
In this paper, a modified low-votlage CMOS bandgap voltage reference with CTAT compensation is presented. The proposed structure doesn't use PTAT current. The proposed structure is more simple than the existing structure and doesn't use the eighteen BJT. The modified low-votlage CMOS bandgap voltage...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
밴드갭 레퍼런스 회로의 기존 구조는 기본 구조에 비해 어떠한 장단점을 가지는가? | 기존 구조의 밴드갭 레퍼런스 회로는 npn BJT와 pnp BJT를 이용하여 2개의 PTAT 전류와 2개의 CTAT 전류를 생성하고 가산과 감산을 통해 낮은 온도 계수를 갖는 밴드갭 레퍼런스 회로를 구현하였다 [6]. 기존 구조는 기본 구조에 비해 매우 낮은 온도 계수를 가지지만 연산증폭기, BJT, 저항 등을 기본 구조에 비해 2배를 사용하므로 면적도 2배로 늘어나게 된다. | |
ADC, DAC의 성능이 점점 좋아짐에 따라 어떠한 밴드갭 레퍼런스 회로가 필요하게 되었는가? | 기술의 발전으로 ADC, DAC의 성능이 점점 더 좋아지고 있고 이에 따라 온도 계수가 낮은 밴드갭 레퍼런스 회로가 필요하게 되었다. 기본적인 밴드갭 레퍼런스 회로에서 보상을 통해 매우 낮은 온도 계수를 갖는 구조가 제안되었다[5][6]. | |
밴드갭 레퍼런스 회로는 어떻게 구성되어 있는가? | 밴드갭 레퍼런스 회로는 온도가 증가함에 따라 전류가 증가하는 PTAT(Proportional To Absolute Temperature), 온도가 증가함에 따라 전류가 감소하는 CTAT(Complementary To Absolute Temperature), 전류를 가산하는 회로, Start-up으로 구성되어 있다. PTAT과 CTAT의 전류를 가산함으로 밴드갭 레퍼런스 회로에서 생성되는 전류는 온도의 변화에 무관하며 저항을 이용하여 기준 전압을 생성한다[3][4]. |
K. N. Leung and K. T. Mok, "A sub-1-V 15-ppm/ $^{\circ}C$ CMOS bandgap voltage reference without requiring low threshold voltage device," IEEE J. Solid-State Circuits, vol. 37, no. 4, pp. 526-529, Apr. 2002.
P. Malcovati, F. Maloberti, M. Pruzzi, and C. Fiocchi, "Curvature compensated BiCMOS bandgap with 1-V supply voltage," IEEE J. Solid-State Circuits, vol. 36, no. 7, pp. 1076-1081, Jul. 2001.
H. Banba, H. Shiga, A. Umezawa, T. Miyaba, T. Tanzawa, S. Atsumi, and K. Sakui, "A CMOS bandgap voltage reference circuit with sub-1-V operation," IEEE J. Solid-State Circuits, vol. 34, no. 5, pp. 670-674, May 1999.
G. Giustolisi, "A low-voltage low-power voltage reference based on subthreshold MOSFETs," IEEE J. Solid-State Circuits, vol. 38, no. 1, pp. 151-154, Jan. 2003.
G.A. Rincon-Mora and P. E. Allen, "A 1.1-V Current-Mode and Piecewise-Linear Curvature- Corrected Bandgap Reference," IEEE J. Solid- State Circuits, vol. 33, pp. 1551-1554, Oct. 1998.
Ming-Dou Ker, Jung-Sheng Chen, "New Curvature-Compensation Technique for CMOS Bandgap Reference With Sub-1-V Operation," IEEE Transactions on Circuits and Systems, vol. 53, no. 8, pp. 667-671, Aug. 2006.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.