최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기제어·로봇·시스템학회 논문지 = Journal of institute of control, robotics and systems, v.18 no.6, 2012년, pp.519 - 525
양이진 (한양대학교 일반대학원 자동차공학과) , 최규웅 ((주)만도 BD사업본부 제동2연구소) , 허건수 (한양대학교 미래자동차공학과)
Electric brake booster systems replace conventional pneumatic brake boosters with electric motors and rotary-todisplacement mechanisms including ECU (Electronic Control Unit). Electric booster brake systems require precise target pressure tracking and control robustness because vehicle brake systems...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
유압식 BBW 시스템에서 electric booster 시스템의 개발이 활발히 진행되고 있는 이유는 무엇인가? | 엔진 진공 배제하고 고압으로 충진된 브레이크 오일을 압력 원으로 사용하는 EHB나 AHB와 달리 유압식 BBW 시스템의 경우 전기 구동 모터로 마스터 실린더를 배력하여 압력을 생성하는 electric booster 시스템의 개발이 활발히 진행되고 있는데, 이는 압력제어를 위하여 솔레노이드 밸브, 유압펌프와 모터 및 배관 연결 등으로 구성된 시스템과 달리 단순히 모터 위치 및 토크를 제어함으로써 압력제어가 가능해질 수 있기 때문이다. | |
BBW 시스템의 장점은 무엇인가? | 일반 차량의 각 바퀴에 장착되는 캘리퍼를 전자화한 EMB (Electro-Mechanical Brake), 공압식 부스터와 마스터 실린더로 구성 되는 엑츄에이션 시스템을 전자화한 EHB (ElectroHydraulic Brake) 또는 AHB (Active Hydraulic Booster)등을 주요한 예로 들 수 있다. BBW 시스템은 기존 공압 배력식 유압 시스템에 대비하여 빠른 응답성을 보이고 가벼우며 차량 장착 시 용이한 장점이 있다. 그러나 완전한 BBW 시스템인 EMB는 제품의 신뢰성 및 고난이도의 제어기법 및 고장모드 관리 기법이 필요하고 가격이 높다는 단점을 가지고 있다. | |
미래형 자동차의 브레이크 시스템에 적합한 BBW 시스템은 다양한 형태로 개발되고 있는데, 그 예를 들면? | 미래형 자동차의 브레이크 시스템에 적합한 BBW (Brake-By-Wire) 시스템은 다양한 형태로 개발되고 있다[1,2]. 일반 차량의 각 바퀴에 장착되는 캘리퍼를 전자화한 EMB (Electro-Mechanical Brake), 공압식 부스터와 마스터 실린더로 구성 되는 엑츄에이션 시스템을 전자화한 EHB (ElectroHydraulic Brake) 또는 AHB (Active Hydraulic Booster)등을 주요한 예로 들 수 있다. BBW 시스템은 기존 공압 배력식 유압 시스템에 대비하여 빠른 응답성을 보이고 가벼우며 차량 장착 시 용이한 장점이 있다. |
D. Schenk, R. Wells, and J. Miller, "Intelligent braking for current and future vehicles," SAE International Congress and Exposition, Detroit, USA, SAE 950762, Feb. 1995.
N. A. Kelling and P. Leteinturier, "X-by-wire: opportunities, challenges and trends," 2003 SAE World Congress, Detroit, USA, SAE 2003-01-0113, Mar. 2003.
C. Line, C. Manzie, and M. Good, "Electromechanical brake modeling and control: from PI to MPC," IEEE Trans. on Control Systems Technology, vol. 16, no. 3, pp. 446-457, May. 2008.
R. Schwarz, R. Iselmann, J. Bohm, J. Nell, and P. Rieth, "Modeling and control of an electromechanical disk brake," SAE International Congress and Exposition, Detroit, USA, SAE 980600, Feb. 1998.
C. Maron, T. Dieckmann, S. Hauck, and H. Prinzler, "Electromechnical brake system: actuator control development system," SAE Technical Paper, 970814, Feb. 1997.
H. Klode, A. M. Omekanda, B. Lequesne, S. Gopalakrlshnan, A. Khalil, S. Underwood, and I. Husain, "The potential of switched reluctance motor technology for electro-mechanical brake applications," SAE Technical Paper, 2006-01-0296. Apr. 2006.
C. Line, C. Manzie, and M. Good, "Control of an electromechanical brake for automotive brake-by-wire systems with an adapted motion control architecture," SAE Technical Paper, 2004-01-2050, May. 2004.
H. K. Khalil, Nonlinear systems, 3rd Ed., Prentice Hall, 2002.
J. J. E. Slotine and W. Li, Applied Nonlinear Control, Prentice Hall, 1991.
T. Umeno and Y. Hori, "Robust speed control of dc servomotors using modern two degrees-of-freedom controller design," IEEE Trans. Ind. Electron., vol. 38, no. 5, pp. 363-368, 1991.
H. S. Lee and M. Tomizuka, "Robust motion controller design for high-accuracy positioning systems," IEEE Trans. Ind. Electron., vol. 43, no. 1, pp. 48-55, 1996.
K. Ohnishi, M. Shibata, and T. Murakami, "Motion control for advanced mechatronics," IEEE/ASME Trans Mechatronics, vol. 1, no. 1, pp. 56-67, 1996.
M. Iwasaki, T. Shibata, and N. Matsui, "Disturbance observerbased nonlinear friction compensation in table drive system," Mechatronics, vol. 4, no. 1, pp. 3-8, 1999.
C. J. Kempf and S. Kobayashi, "Disturbance observer and feedforward design for a high-speed direct-drive positioning table," IEEE Trans. Control Syst. Technol., vol. 7, no. 5, pp. 513- 526, 1999.
L. X. Wang, A Course in Fuzzy Systems and Control, Prentice Hall, 1997.
W. Chang, Y. H. Joo, J. B. Park, and G. Chen, "Robust fuzzymodel- based controller for uncertain systems," IEEE Int. Proc. of Conference Fuzzy Systems, vol. 1, pp. 486-491, Aug. 1999.
R. G. Morgan and U. Ozguner, "A decentralized variable structure control algorithm for robotic manipulators," IEEE J. Robot. and Auto., vol. RA-1, no. 1, pp. 57-65, Mar. 1985.
T. C. Hsia and L. S. Gao, "Robot manipulator control using decentralized linear time-invariant time-delayed controllers," Proc. of IEEE Int. Conf. on Robot. and Auto., pp. 2070-2075, 1990.
K. Youcef-Toumi and S. Reddy, "Analysis of linear time invariant systems with time delay," ASME J. Dyn. Sys., Meas., and Contr., vol. 114, pp. 544-555, Dec. 1992.
H. S. Jeong and C. W. Lee, "Time delay control with state feedback for azimuth motion of the frictionless positioning device," IEEE/ASME Trans. on Mechatronics, vol. 2, no. 3, pp. 161-168, Sep. 1997.
J. B. Son, H. R. Kim, Y. S. Seo, and J. M. Lee, "PMSM sensorless speed control using a high speed sliding mode observer," Journal of Institute of Control, Robotics and Systems (in Korean), vol. 16, no. 3, Mar. 2010.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.