최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of mechanical science and technology, v.26 no.5, 2012년, pp.1477 - 1482
Han, Seung-Wook (Department of Mechanical Engineering, Graduate School, Hanyang University) , Choi, Nak-Sam (Department of Mechanical Engineering, Hanyang University) , Lee, Min-Soo (Doosan Technical Center)
Wettability of a glass fabric was studied by use of a resin drop method. The mixing ratios of epoxy resin and anhydride hardener were adopted as 1:0.5, 1:1 and 1:1.2. A catalyst of 2-ethyl-4-methylimidazole added as much as 0.1wt% of the mixed resin. A curing analysis by differential scanning calori...
The Korea Journal of Rheology J. D. Nam 7 1 1 1995 J. D. Nam, S. J. Lee and K. J. Lee, Resin transfer molding for high performance composite materials, The Korea Journal of Rheology, 7(1) (1995) 1-9.
Composites part A N. Pearcea 29A 141 1997 N. Pearcea, F. Guildb and J. Summerscales, A study of the effects of convergent flow fronts on the properties of fibre reinforced composites produced by RTM, Composites part A, 29A (1997) 141-152.
Journal of Reinforces Plastics and Composites J. P. Coulter 7 3 200 1988 10.1177/073168448800700301 J. P. Coulter and S. I. Guceri, Resin impregnation during the manufacturing of composite materials subject to prescribed injection rate, Journal of Reinforces Plastics and Composites, 7(3) (1988) 200-219.
Composites Science and Technology G. Kaptay 68 228 2008 10.1016/j.compscitech.2007.04.023 G. Kaptay, The threshold pressure of infiltration into fibrous preforms normal to the fibers’ axes, Composites Science and Technology, 68 (2008) 228-237.
Chemical Engineering Science S. Rebouillat 57 3953 2002 10.1016/S0009-2509(02)00309-3 S. Rebouillat, B. Steffenino and B. Salvador, Hydrodynamics of high-speed fibre impregnation: the fluid layer formation from the meniscus region, Chemical Engineering Science, 57 (2002) 3953-3966.
Composites Science and Technology R. A. Saunders 59 983 1999 10.1016/S0266-3538(98)00137-7 R. A. Saunders, C. Lekakou and M. G. Bader, Compression in the processing of polymer composites 1. A mechanical and microstructural study for different glass fabrics and resins, Composites Science and Technology, 59 (1999) 983-993.
10.1016/0306-3747(92)90035-X H. Yamada, I. Mihata, T. Tomiyama and S. P. Walsh, Investigation of the fundamental causes of pinholes in SMC mouldings, Proceedings of SPI Composite Institutes 47th Annual Conference, Cincinatti SPI, New York (1992).
Composite Structures S. F. M. Almeida 28 2 139 1994 10.1016/0263-8223(94)90044-2 S. F. M. Almeida and Z. S. N. Neto, Effect of void content on the strength of composite laminate, Composite Structures, 28(2) (1994) 139-148.
SAMPE Journal N. C. W. Judd January/Februar 10 1978 N. C. W. Judd and W. W. Wright, Voids and their effects on the mechanical properties of composites; an appraisal, SAMPE Journal, January/February (1978) 10-14.
SAMPE Quarterly S. R. Ghiorse 24 2 54 1993 S. R. Ghiorse, Effect of void content on the mechanical properties of carbon/epoxy laminates, SAMPE Quarterly, 24(2) (1993) 54-59.
Journal of Composite Materials K. J. Bowles 26 1487 1992 10.1177/002199839202601006 K. J. Bowles and S. Frimpong, Void effects on the interlaminar shear strength of unidirectional graphite fiberreinforced composites, Journal of Composite Materials, 26 (1992) 1487-1509.
Polymer Testing D. Saihi 21 615 2002 10.1016/S0142-9418(01)00131-3 D. Saihi, A. El-Achari, A. Ghenaim and C. Caze, Wettability of grafted poly(ethylene terephthalate) fibers, Polymer Testing, 21 (2002) 615-618.
Journal of Korea Technical Association of the Pulp and Paper Industry C. Y. Lee 35 3 43 2003 C. Y. Lee, C. H. Kim, K. M. Choi, C. Y. Park and O. C. Kweon, Development of a novel system for measuring sizing degree based on contact angle(I), Journal of Korea Technical Association of the Pulp and Paper Industry, 35(3) (2003) 43-52.
Colloids and Surfaces A: Physicochem. Eng. Aspects B. Simoncic 292 236 2007 10.1016/j.colsurfa.2006.06.025 B. Simoncic and V. Rozman, Wettability of cotton by aqueous solutions of surfactants with different structures, Colloids and Surfaces A: Physicochem. Eng. Aspects, 292 (2007) 236-245.
P. C. Hiemenz 1986 Surface tension and contact angle(Chapter 6 in principles of colloid and surface chemistry) Second Ed. P. C. Hiemenz, Surface tension and contact angle(Chapter 6 in principles of colloid and surface chemistry), Second Ed. Marcel Dekker, New York, USA, (1986).
Journal of Reinforced Plastics and Composites C. S. Wang 28 19 2377 2009 10.1177/0731684408092371 C. S. Wang and S. A. Iobst, Reducing fiber readout of structural composite panels, Journal of Reinforced Plastics and Composites, 28(19) (2009) 2377-2386.
Measuring and analyzing with ease (iSolution Lite), iM-Technology (Image & Microscope Technology), Daejeon, Korea, (2001).
Polymer Composites K. J. Ahn 12 3 146 1991 10.1002/pc.750120303 K. J. Ahn, J. C. Seferis and J. C. Berg, Simultaneous measurements of permeability and capillary pressure of thermosetting matrices in woven fabric reinforcements, Polymer Composites, 12(3) (1991) 146-152.
Polymer Engineering & Science J. G. Williams 14 6 413 1974 10.1002/pen.760140603 J. G. Williams, C. E. M. Morris and B. C. Ennis, Liquid flow through aligned fiber beds, Polymer Engineering & Science, 14(6) (1974) 413-419.
The Korea Journal of Rheology C. H. Lee 10 4 185 1998 C. H. Lee, S. H. Kim, S. W. Kim and K. J. Lee, An experimental study on the effect of capillary pressure on the void formation in resin transfer molding process, The Korea Journal of Rheology, 10(4) (1998) 185-194.
The Korea Journal of Rheology G. W. Lee 7 4 139 1995 G. W. Lee, M. H. Lee, S. W. Kim and K. J. Lee, Experimental and numerical studies on the flow characteristics in resin transfer molding process, The Korea Journal of Rheology, 7(4) (1995) 139-149.
J. of Korean Ind. & Eng. Chemistry S. T. Nam 9 2 200 1998 S. T. Nam, M. J. Han, H. S. Choi and Y. T. Park, Effect of physical properties of polymer solution on the thickness of ultrathin membrane prepared by water casting method, J. of Korean Ind. & Eng. Chemistry, 9(2) (1998) 200-206.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.