최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국주조공학회지 = Journal of Korea Foundry Society, v.32 no.3, 2012년, pp.150 - 156
Yue, Xue-Zheng (i-Cube Group, ERI, School of Nano and Advanced Materials Engineering, Gyeongsang National University) , Hur, Bo-Young (i-Cube Group, ERI, School of Nano and Advanced Materials Engineering, Gyeongsang National University)
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
B. Y. Hur, Y. S. Um and S. Y. Kim : Trends in Metals & Materials Engineering, "Development of Fabrication Technology for Al Foam with Lightweight -Strength", 17 (2004) 37-46
B. Y. Hur, S. H. Park and A. Hiroshi : Mater. Sci. Forum, "Viscosity and Surface Tension of Al and Effects of Additional Element", 439 (2003) 51-56
John Banhart: Int. J. Vehicle Des. Manufacture, "Charaterisation and application of cellular metals and metal foams", 37 (2005) 114
D-H. Yang, B. Y. Hur and S-R. Yang: J. Alloys Compd, "Study on fabrication and foaming mechanism of Mg foam using $CaCO_3$ as blowing agent", 461 (2008) 221-227
Younghwan Song, Soo Han Park, Sang Youl Kim, Changhwan Seo and Boyoung Hur: Solid State Phenom, "A Study on Mg-Al Alloy Foams by Melt Foaming Method", 125 (2007) 1841-1844
P. Sevilla, C. Aparicio, J. A. Planell and F. J. Gil: J Alloy Comp, "Comparison of the mechanical properties between tantalum and nickel-titanium foams implant materials for bone ingrowth applications", 439 (2007), 67-73
W. Y Jang: Int J Solid Struct, "On the microstructure of open-cell foams and its effect on elastic properties", 45(7,8) (2008) 1845-1875
A. J. and A. K: Metals 2011, "The Manufacture and Characterisation of Aluminium Foams Made by Investment Casting Using Dissolvable Spherical Sodium Chloride Bead Preforms", 1 (2011) 49-64
M. G and C. Hintz: Proceeding of material week 2000 conf., "Determination of Parameters for Infiltrated Metallic Foam Composites" (2000) 781.
I. N. O.: Mater Sci Forum, "Composite production by pressure infiltration", 589 (2008) 137-142
J. E. Niesse, M. C. Flemings and H. F. Taylor: Trans. AFS "Application of Theory in Understanding Fluidity of Metals," 67 (1959) 685-697
M. C. Flemings: in Proceedings of the 30th International Foundry Congress, "Fluidity of Metals-Techniques for Producing Ultra Thin Section Castings", (1963) 61-81
I. Jeon and T. Asahina: Acta Mater, "The effect of structural defects on the compressive behavior of closed-cell Al foam", 53 (2005) 3415-3423
J. Campbell: Castings, Butterworth-Heinemann, Oxford, Boston, (1993) 288
M. X. Xu: Master thesis(in Chinese), "Preparation and compression property of foamed magnesium alloy", Taiyuan University of Technology in china (2009) 6.
Mukai T, Kanahashi H and Miyoshi T: Scripta Mater, "Experimental study of energy absorption in a closed-celled aluminum foam under dynamic loading", 40 (1999) 921-927
Sirong Yu: Eng Mater Des, "Compressive property and energy absorption characteristic of open-cell ZA22 foams", 30 (2009) 87-90
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.