최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. B. B, v.36 no.11 = no.326, 2012년, pp.1111 - 1117
정진우 (포항공과대학교 기계공학과) , 장진아 (포항공과대학교 융합생명공학부) , 심진형 (포항공과대학교 기계공학과) , 김성원 (가톨릭대학교 의과대학 이비인후과학교실) , 조동우 (포항공과대학교 기계공학과)
Implants for rhinoplasty should ideally be biocompatible and possess long-term stability after implantation. Silicone implants are most widely used for rhinoplasty. However, these implants suffer from problems related to high extrusion and infection rates. To minimize these complications, we propose...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
코 성형술에 사용되는 보편적인 재료는 어떻게 나뉘는가? | 코 성형술은 선천적 혹은 후천적 질병에 의한 코의 외형적 트라우마를 치료하는 목적 외에, 미용을 목적으로 코를 크게 혹은 낮게, 얇게 하는 시술도 포함하고 있다. 이러한 코 성형술에 사용되는 보편적인 재료는 실리콘, 고어텍스등과 같은 합성재료와 자가연골, 자가골 등과 같은 천연재료로 나뉜다.(1) 천연재료 중 자가연골이 생체 적합성 측면에서 가장 이상적이지만, 자가 조직을 써야 하는 불편함이 있고, 몸에서 추출할 수 있는 양이 적어 제한적으로 사용되고 있는 추세이다. | |
현대 사회에 있어 코는 어떻게 인식되는가? | 현대 사회에 있어 코는 호흡 및 공기 중 먼지들의 여과를 위한 기능적인 측면 외에 외모와 인상에서 가장 중요한 부분으로 인식되고 있다. 코 성형술은 선천적 혹은 후천적 질병에 의한 코의 외형적 트라우마를 치료하는 목적 외에, 미용을 목적으로 코를 크게 혹은 낮게, 얇게 하는 시술도 포함하고 있다. | |
이상적인 코 보형물은 환자가 원하는 모양을 그대로 재현하면서, 그 상태를 안정적으로 유지할 수 있는 재료적 특성을 지녀야 하는데 현재 보편적으로 사용되고 있는 실리콘 코 보형물의 문제점은? | 이상적인 코 보형물은 환자가 원하는 모양을 그대로 재현하면서, 그 상태를 안정적으로 유지할 수 있는 재료적 특성을 지녀야 한다. 현재 보편적으로 사용되고 있는 실리콘 코 보형물은 면역 반응이나 피부를 뚫고 돌출하는 문제점 등이 보고되고 있다. 이러한 부작용을 최소화하기 위해 본 연구에서는 조직공학 기술을 이용하여 새로운 코 성형술을 제안하고자 한다. |
Vuyk, H. D. and Adamson, P. A., 1998, "Biomaterials in Rhinoplasty," Clinical Otolaryngology and Allied Sciences, Vol. 23, No. 3, pp. 209-217.
Byrd H. S. and Hobar P. C., 1993, "Rhinoplasty: A Practical Guide for Surgical Planning," Plastic and Reconstructive Surgery, Vol. 91, No. 4, pp. 642-654.
Seol, Y.-J., Kang, T.-Y. and Cho, D.-W., 2012, "Solid Freeform Fabrication Technology Applied to Tissue Engineering with Various Biomaterials," Soft Matter, Vol. 8, No. 6, pp. 1730-1735.
Mohan, N. and Nair, D. N., 2008, "Polyvinyl Alcohol-poly (caprolactone) Semi IPN Scaffold with Implication for Cartilage Tissue Engineering," Journal of Biomedical Materials Research Part B: Applied Biomaterials, Vol. 84B, No. 2, pp. 584-594.
Lee, J.-S., Cha, H. D., Shim, J.-H, Jung, J. W., Kim, J. Y. and Cho, D.-W., 2012, "Effect of Pore Architecture and Stacking Direction on Mechanical Properties of Solid Freeform Fabrication-Based Scaffold for Bone Tissue Engineering," Journal of Biomedical Materials Research Part A, Vol. 100A, No.7, pp. 1846-1853.
Kim, J. Y., Yoon, J. J., Park, E. K., Kim, D. S., Kim, S.-Y. and Cho, D.-W., 2009, "Cell Adhesion and Proliferation Evaluation of SFF-Based Biodegradable Scaffolds Fabricated using a Multi-head Deposition System," Biofabrication, Vol. 1, No. 1, 015002.
Solchaga, L. A., Tognana, E., Penick, K., Baskaran, H., Goldberg, V. M., Caplan, A. I., and Welter, J. F., 2006, "A Rapid Seeding Technique for the Assembly of Large Cell/scaffold Composite Constructs," Tissue Engineering, Vol. 12, No. 7, pp. 1851-1863.
Stiehler, M., Bunger, C., Baatrup, A., Lind, M., Kassem, M. and Mygind, T., 2009, "Effect of Dynamic 3-D Culture on Proliferation, Distribution, and Osteogenic Differentiation of Human Mesenchymal Stem Cells," Journal of Biomedical Materials Research Part A, Vol. 89A, No. 1, pp. 96-107.
Enobakhare, B. O., Bader, D. L. and Lee, D. A., 1996, "Quantification of Sulfated Glycosaminoglycans in Chondrocyte/Alginate Cultures, by Use of 1,9-Dimethylmethylene Blue," Analytical biochemistry, Vol. 243, No. 1, pp. 189-191.
Rao, J., and Otto, W. R., 1992, "Fluorimetric DNA Assay for Cell Growth Estimation," Analytical Biochemistry, Vol. 207, No. 1, pp. 186-192.
Seol, Y.-J., Park, J. and Cho, D.-W., 2011, "Fabrication of Calcium Phosphate Scaffolds Using Projection-based Microstereolithography and Their Effects on Osteogenesis," Trans. of the KSME (B), Vol. 35, No. 11, pp. 1237-1242.
Jung, J. W., Kang, H.-W., Kang, T.-Y., Park, J. H., Park, J., and Cho, D.-W., 2012, "Projection Image-Generation Algorithm for Fabrication of a Complex Structure Using Projection-Based Microstereolithography," International Journal of Precision Engineering and Manufacturing, Vol. 13, No. 3, pp. 445-449.
Kang, H. W. and Cho, D.-W., 2012, "Development of an Indirect Stereolithography Technology for Scaffold Fabrication with a Wide Range of Biomaterial Selectivity," Tissue Engineering Part C: Methods, Online published.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.