최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국마린엔지니어링학회지 = Journal of the Korean Society of Marine Engineering, v.37 no.1, 2013년, pp.16 - 21
김영근 (경상대학교 대학원 정밀기계공학과) , 조선형 (한국폴리텍IV대학 녹색산업설비과) , 성용진 (경상대학교 대학원 정밀기계공학과) , 정한식 (경상대학교 에너지기계공학과, 해양산업연구소) , 정효민 (경상대학교 에너지기계공학과, 해양산업연구소)
Nanofluids are suspensions of metallic or nonmetallic nano powders in base liquid and can be employed to increase heat transfer rate in various applications. In this research the heat transfer characteristics has been experimented by alumina(50 nm)/water nano-fluids. Experimental results showed that...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
현재 열교환용 유체로 많이 사용하는 것은? | Figure 1은 현재 열교환용 유체로 많이 사용되는물, 에틸렌글리콜, 엔진오일과 금속 또는 비금속성 고체물질의 열전도율을 나타낸 것이다. 열교환용 유체에 상대적으로 열전도도가 우수한 고체 입자를 분산시킨 상태의 유체를 이용하여 열전도도를 증가시킬 수 있다는 이론은 이미 맥스웰에 의해 제시 되었으나[1], 이전까지의 기술로는 수 mm 혹은 수 μm의 입자들로만 실험이 가능하였다. | |
나노유체란? | 나노유체란 유체 내에 금속 또는 비금속성 나노 크기의 입자를 분산시킨 것으로서 열전달율을 높이기 위해 다양한 곳에서 사용되어진다. 본 논문에서는 50 nm 크기의 알루미나를 증류수에 분산시켜 농도 및 유속에 따른 기본적인 열전달 특성을 알아보고자 하였다. | |
Two step method에서 발생한 문제는? | Two step method의 장점은 나노입자 제조기술 발전에 따라 나노입자들의 제공이 용이하다는 점이다. 하지만, 나노입자를 유체에 분산(dispe rsion)함 있어서 입자 뭉침(agglomeration) 현상이 발생하여, 나노유체의 특성을 장시간 유지시킬 수 없다는 문제가 발생되었다[5]. 이는 입자간의 반데르 발스력(van der Waals force)에 의해서 발생되어짐으로 보고되어 지고 있다. |
J. C. Maxwell, A Treatise on Electricity and Magnetism, Clarendon Press, Oxford, 1873.
A. S. Ahuja, "Augmentation of heat transfer in laminar flow of polystyrene suspensions", Journal of Applied Physics, vol. 46, pp. 3408-3425, 1975.
S. U. S. Choi, "Enhancing thermal conductivity of fluids with nanoparticl- es", Developments and Applications of Non-Newtonian Flows, American Society of Mechanical Engineers Fluid Engineering Division, vol. 231, pp. 99-105, 1995.
S. P. Jang and S. U. S. Choi, "The role of Brownian motion in the enhanced thermal conductivity of nanofluids", Applied Physics Letters, vol. 84, pp. 4316-4318, 2004.
H. Xie, J. Wang, T. Xi, Y. Liu. F. Ai, "Dependence of the thermal conductivity of nanoparticle-fluid mixture on the base fluid", Journal of Materials Science Letters, vol 21, pp. 1469-1471. 2002.
J. A. Eastman, S. U. S. Choi, S. Li, W. Yu, and L. J. Thompson, "Anomalously increased effective thermal conductivities of ethylene glycol-based nanofluids containing copper nanoparticles", Applied Physics Letters, vol. 78, no. 6, pp. 718-720, 2001.
S. P. Jang, "Technology Status and Future of nanofluids", Journal of the Korean Society of Mechanical Engineers, vol. 46 no. 7, pp. 34-36, 2006 (in Korean).
R. K. Shah, "Thermal entry length solutions for the circular tube and parallel plates", Proceedings of the 3rd National Heat and Mass Transfer Conference, pp. HTM-11-75, 1975.
E. N. Seider and G. E. Tate, "Heat transfer and pressure drop of liquid in tubes", Industrial and Engineering Chemistry, vol. 28, no. 12, pp. 1429-1435, 1936.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.