최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기韓國鋼構造學會 論文集 = Journal of Korean Society of Steel Construction, v.25 no.1 = no.122, 2013년, pp.81 - 92
안태상 (DRB동일, 면진제진기술연구소) , 김영주 (DRB동일, 면진제진기술연구소) , 김형근 (SH공사, 도시연구소) , 장동운 (쌍용건설, 건축기술부) , 최경규 (숭실대학교, 건축학부) , 김종락 (숭실대학교, 건축학부)
The objective of conventional seismic design is to ensure an acceptable safety level while avoiding catastrophic failures of structures and loss of life. Over the last many years, a large amount of research has been devoted into developing effective earthquake resistant systems in order to raise the...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
제진구조시스템이란 무엇인가? | 제진구조시스템은 구조물 내에 제진장치를 삽입하여 지진에 의한 진동을 제어하여 구조물을 보다 안전하게 하는 구조 시스템이다. 에너지흡수에 의한 수동제진방법은 마찰에 의한 미끄럼, 강재의 항복, 재료의 상변환, 점(탄성)재료의 변형 등에 따라서 다양하게 적용되고 있다. | |
전단벽 제진시스템은 어떻게 구성되어 있는가? | 1은 전단벽 제진시스템의 개념을 나타낸 것이다. 제안된 시스템은 콘크리트 전단벽, 댐퍼, 적층고무 면진장치로 구성되어 있으며, 전단벽 하부에 슬릿을 두어 가운데에는 댐퍼를, 양측에는 면진장치를 배치하였다. 본 제진시스템에는 변위의존형 장치인 마찰댐퍼와 강재이력댐퍼가 사용된다. | |
전통적인 내진설계의 기본개념은 무엇인가? | 전통적인 내진설계의 기본개념은 구조물의 붕괴를 방지하고 인명을 보호하도록 안전성을 유지하는 것이다. 지진 후에 구조물이 완전히 붕괴되지 않고 거주자들의 생명이 보호받으면 그 구조물을 기능적으로 재사용을 할 수 없을지라도 이건물은 내진설계의 목적을 충족했다고 할 수 있다. |
Christopoulos, C. and Filiatrault, A. (2006) Principles of Passive Supplemental Damping and Seismic Isolation, IUSS Press.
ASCE STANDARD (2007) Seismic Rehabilitation of Existing Buildings(ASCE 41-06), ASCE.
ASCE STANDARD (2010) Minimum Design Loads for Buildings and Other Structures (ASCE 7-10), ASCE.
Soong, T.T. and Dargush, G.F. (1997) Passive energy dissipation systems in structural engineering, John Wiley & Sons.
김현수, 강주원 (2012) 중약진지역에 대한 MR감쇠기가 구성된 스마트 면진시스템의 특성연구, 한국강구조학회 논문집, 한국강구조학회, 제24권, 제3호, pp.325-337. Kim, H.S. and Kang, J.W. (2012) Characteristics of smart base isolation system with MR damper for regions of low-to-moderate seismicity, Journal of Korean Society of Steel Construction, KSSC, Vol. 24, No. 3, pp.325-337 (in Korean).
Kim, H.J., Christopoulos, C., and Tremblay, R. (2004) Experimental characterization of bolt-stressed nonasbestos organic (NAO) material-to-steel interfaces, Report No. UT2004-3, Department of Civil Engineering, University of Toronto, Canada.
김현수, 최재혁(2009) 전단형 마찰댐퍼의 이력특성에 관한 실험적 연구, 2009년도 학술대회 발표집, 한국강구조학회, pp.155-156. Kim, H.S. and Choi, J.H. (2009) An Experimental Study on Hysteretic Characteristics of Shear-type Friction Damper, Proceedings of Annual Conference Korean Society of Steel Construction, KSSC, pp. 155-156 (in Korean).
Bergman, D.M. and Goel, S.C. (1987) Evaluation of cyclic testing of steel plate devices for added damping and stiffness, Report UMCE87-10, University of Michigan, Ann Arbor, MI.
Tsai, K., Chen, H., Hong, C., and Su, Y. (1993) Design of steel triangular plate energy absorbers for seismic-resistant construction, Earthquake Spectra, Vol. 9, No. 3, pp.505-528.
오상훈, 김영주, 유홍식, 강창훈(2006) 보의 하부플랜지에 에너지 흡수요소를 가지는 기둥-보 접합부의 이력특성, 대한건축학회구조계논문집, 대한건축학회, 제22권, 제8호, pp.29-36. Oh, S.H., Kim, Y.J., Ryu, H.S., and Kang, C.H. (2006) Hysteretic Characteristics of Beam-to-Column Connections with Energy Absorption Elements at Beam Bottom Flanges, Journal of Architectural Institute of Korea, AIK, Vol. 22, No. 8, pp.29-36 (in Korean).
오상훈, 최광용, 유홍식(2012) 고층 전단벽시스템 적용을 위한 직렬연결형 강재이력댐퍼의 구조성능평가, 한국강구조학회 논문집, 한국강구조학회, 제24권, 제4호, pp.371-383. Oh, S.H., Choi, K.Y., and Ryu, H.S. (2012) Performance Evaluations of Steel Hysteretic Damper in Series for High-Rise Shear Wall System, Journal of Korean Society of Steel Construction, KSSC, Vol. 24, No. 4, pp.371-383 (in Korean).
안태상, 김영주, 박진화, 김형근, 장동운, 오상훈(2012) 건물의 내진보강을 위한 캔틸레버타입 강재댐퍼의 실험, 한국강구조학회 논문집, 한국강구조학회, 제24권, 제2호, pp.149-161. Ahn, T.S., Kim, Y.J. Park, J.W., Kim, H.G., Jang, D.W., and Oh, S.H. (2012) Experimental study on a Cantilever Type Metallic Damper for Seismic Retrofit of Building Structures, Journal of Korean Society of Steel Construction, KSSC, Vol. 24, No. 2, pp.149-161 (in Korean).
안태상, 김영주, 김형근, 장동운, 오상훈, 김종락(2012) 본진의 크기와 여진을 고려한 전단벽 제진시스템에 관한 실험적 연구, 대한건축학회구조계논문집, 대한건축학회, 제28권, 제8호, pp.33-40. Ahn, T.S., Kim, Y.J. Kim, H.G., Jang, D.W., Oh, S.H., and Kim, J.R. (2012) Experimental Investigation of a Damping Shear Wall System Considering Aftershocks and the Size of the Main Shocks, Journal of Architectural Institute of Korea, AIK, Vol. 28, No. 8, pp.33-40 (in Korean).
SH공사(2011) 공동주택 리모델링을 위한 지진제어시스템 개발, SH공사 도시연구소 연구보고서. SH Corporation (2011) Development of vibration control system for remodeling of apartment building, Research Center of SH.
Benavent-Climent, A., Oh, S.H., and Akiyama, H. (1998), Ultimate energy absorption capacity of slit-type steel plates subjected to shear deformations, Journal of Structural and Construction Engineering, Vol. 503, pp.139-147.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.