최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. B. B, v.37 no.4 = no.331, 2013년, pp.415 - 421
김중석 (두산중공업(주) 기술연구원) , 이우상 (두산중공업(주) 기술연구원) , 류제욱 (두산중공업(주) 기술연구원)
This study describes the aerodynamic design procedure for the axial turbines of a small heavy-duty gas turbine engine being developed by Doosan Heavy Industries. The design procedure mainly consists of three parts: namely, flowpath design, airfoil design, and 3D performance calculation. To design th...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
최적의 유로를 설계하기 위해 수행하는 것은? | 축류터빈의 설계 과정은 크게 유로설계, 익형설계, 3D 성능 계산의 세 단계로 구성되며. 최적의 유로를 설계하기 위해 자오면의 형상, 평균 반경, 블레이드간 간격, 유로 형상각 등 여러 형상 변수에 대해 통과유동계산 및 손실계산을 수행한다. 익형 설계는 유로 설계시 스팬 방향으로 계산된 입출구 유동각을 기준으로 실험상관식을 적용하여 최적의 블레이드 개수를 결정한 후 2D 익형 단면을 설계하며 2D NS 계산을 통해 캐스케이드 유동구조를 검토하여 설계한 단면의 설계적정성을 평가한다. | |
축류터빈의 설계 과정은? | 본 논문은 두산중공업(주)에서 개발 중인 소형 가스터빈의 축류 터빈 설계 과정을 기술하였다. 축류터빈의 설계 과정은 크게 유로설계, 익형설계, 3D 성능 계산의 세 단계로 구성되며. 최적의 유로를 설계하기 위해 자오면의 형상, 평균 반경, 블레이드간 간격, 유로 형상각 등 여러 형상 변수에 대해 통과유동계산 및 손실계산을 수행한다. | |
3D 성능 계산은 어떻게 진행되는가? | 익형 설계는 유로 설계시 스팬 방향으로 계산된 입출구 유동각을 기준으로 실험상관식을 적용하여 최적의 블레이드 개수를 결정한 후 2D 익형 단면을 설계하며 2D NS 계산을 통해 캐스케이드 유동구조를 검토하여 설계한 단면의 설계적정성을 평가한다. 설계된 2D 익형 단면을 스팬방향으로 적층하여 3D 익형을 생성하고, 다단 Euler 계산, 단익렬, 다단 NS 계산을 수행하여 3D 유동 특성을 고찰한다. |
Wu C. H., 1951, "A General Through Flow Theory of Fluid Flow with Subsonic or Supersonic Velocity in Turbomachines Having Arbitrary Hubs and Casing Shapes," NASA TN2388.
Denton, J. D. and Dawes, W. N., 1999, "Computational Fluid Dynamics for Turbomachinery Design," J. Mechanical Engineering Science, Vol. 213, pp 107-124.
Moroz, L., Govorushchenko, Y. and Pagur, P., 2005, "Axial Turbine Stages Design: 1D/2D/3D Simulation, Experiment, Optimization," ASME Paper, GT2005- 68614.
Xu, C. and Amano, R. S., 2002, "A Turbomachinery Blade Design and Optimization Procedure," ASME Paper, GT2002-30541.
Kusterer, K., Hagedorn, T. and Bohn D., 2004, "Conjugate Calculations for a Film Cooled Blade Under Different Operating Conditions," ASME Paper, GT2004- 53719.
Demeulenaere, A., Ligout, A. and Hirsch, C., 2004, "Application of Multipoint Optimization to the Design of Turbomachinery Blades," ASME Paper, GT2004-53110.
Denton, J. D., 1993, "Loss Mechanisms in Turbomachinery," ASME J. Turbomachinery, Vol. 115, pp. 621-656.
Dejc, M. E. and Trojanovskij, B. M., 1973, "Untersuchung und Berechnung Axialer Turbinenstufen, Veb Verlag Technik," Berlin, pp. 207-209.
Wei, N., 2000, "Significance of Loss Models in Aerothermodynamic Simulation for Axial Turbines," PhD Thesis, Royal Institute of Technology.
Traupel, W., 1966, "Thermische Stromungsmaschinen," Springer Verlag.
Zweifel, O., 1945, "The Spacing of Turbomachine Blading, Especially with Large Angular Deflection," Brown Boveri Review 32.
Coakley, T. J., 1983, "Turbulence Modeling of the Compressible Navier-Stokes Equations," AIAA Paper, No. 83-1693.
Denton, J. D., 2010, "Some Limitations of Turbomachinery CFD," ASME Paper, GT2010-22540.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.