최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국소음진동공학회논문집 = Transactions of the Korean society for noise and vibration engineering, v.23 no.4, 2013년, pp.338 - 346
김형영 (School of Mechanical Engineering Hanyang University) , 유홍희 (School of Mechanical Engineering Hanyang University)
Equations of motion of a rotating blade considering pre-twist angle, cross section taper and a concentrated mass are derived using the hybrid deformation variable modeling method. For the modeling of a concentrated mass which is located at an arbitrary position of the blade, a Dirac delta function i...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
진동특성을 정확히 예측하는 것은 구조설계에 있어서 어떤 사항인가? | 이러한 블레이드들은 회전운동을 일으키며 작동 하는데 회전운동에 의해 야기되는 관성력은 시스템 강성 변화를 초래해 진동특성을 현격히 변화시킨다. 진동 특성은 구조물의 구조성능과 큰 연관성을 가지므로 진동특성을 정확히 예측하는 것은 구조설계의 핵심적 사항이라고 할 수 있다. 따라서 블레이드의 구조 설계를 위해서는 정확한 모델링을 통한 진동특성 변화를 예측하는 방법이 요구된다. | |
리콥터, 터빈발전기, 풍력발전기 등은 에너지 변환을 위해 어떤 구조를 사용하는가? | 헬리콥터, 터빈발전기, 풍력발전기 등은 에너지 변환을 위해 블레이드 형태의 구조를 사용한다. 이러한 블레이드들은 회전운동을 일으키며 작동 하는데 회전운동에 의해 야기되는 관성력은 시스템 강성 변화를 초래해 진동특성을 현격히 변화시킨다. | |
블레이드 형태의 구조의 특징은? | 헬리콥터, 터빈발전기, 풍력발전기 등은 에너지 변환을 위해 블레이드 형태의 구조를 사용한다. 이러한 블레이드들은 회전운동을 일으키며 작동 하는데 회전운동에 의해 야기되는 관성력은 시스템 강성 변화를 초래해 진동특성을 현격히 변화시킨다. 진동 특성은 구조물의 구조성능과 큰 연관성을 가지므로 진동특성을 정확히 예측하는 것은 구조설계의 핵심적 사항이라고 할 수 있다. |
Southwell, R. and Gough, F., 1921, The Free Transverse Vibration of Airscrew Blades, British A.R.C. Reports and Memoranda, No. 766.
Schilhansl, M., 1958, Bending Frequency of a Rotating Cantilever Beam, Journal of Appl. Mech. Trans. Am. Soc. Mech. Engrs, 25, pp. 28-30.
Putter, S. and Manor, H., 1978, Natural Frequencies of Radial Rotating Beams, Journal of Sound and Vibration, Vol. 56, No. 2, pp. 175-185.
Bauer, H. F., 1980, Vibration of a Rotating Uniform Beam, Journal of Sound and Vibration, Vol. 72, No. 2, pp. 177-189.
Hoa, S., 1979, Vibration of a Rotating Beam with Tip Mass, Journal of Sound and Vibration, Vol. 67, No. 3, pp. 369-381.
Kuo, Y. H., Wu, T. H. H. and Lee, S. Y., 1994, Bending Vibration of a Rotating Non-uniform Beam with Tip Mass and a Elastically Restrained Root, Computer & Structure, Vol. 22, No. 2, pp. 229-236.
Kane, T., Ryan, R. and Banerjee, A., 1987, Dynamics of Cantilever Beam Attached to a Moving Base, Journal of Guidance, Control and Dynamics, Vol. 10, No. 2, pp. 139-151.
Yoo, H., Ryan, R. and Scott, R., 1995, Dynamics of Flexible Beams Undergoing Overall Motion, Journal of Sound and Vibration, Vol. 181, No. 2, pp. 261-278.
Yoo, H., Seo, S. and Hub, K., 2002, The Effect of a Concentrated Mass on the Modal Characteristics of a Rotating Cantilever Beam, Journal of Mechanical Engineering Science, Vol. 216, No. 2, pp. 151-163.
Yoo, H., Park, J, H., and Park, J, H., 2001, Vibration Analysis of Rotating Pre-twisted Blades, Computers & Structures, Vol. 79, No. 19, pp. 1811-1819.
Lim, H., Chung, J. and Yoo, H., 2009, Modal Analysis of a Rotating Multi-packet Blade System, Journal of Sound and Vibration, Vol. 325, No. 3, pp. 513-531.
Khulief, Y. A., 1989, Vibration Frequencies of a Rotating Tapered Beam with End Mass, Journal of Sound and Vibration, Vol. 134, No. 1, pp. 87-97.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.