다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
JKSDH : Journal of Korean Society of Dental Hygiene = 한국치위생학회지, v.13 no.2, 2013년, pp.361 - 368
김재홍 (고려대학교 일반대학원 보건과학과 치의기공전공) , 김원수 (대전보건대학 치기공학과) , 김기백 (고려대학교 일반대학원 보건과학과 치의기공전공)
AI-Helper
Objectives : The purpose of this in vitro study was to evaluate the effect of firing cycles on the marginal and internal fit of metal ceramic crown. Methods : Ten same cases of stone models (abutment teeth 11) were manufactured. Ten cobalt-chrome cores were made per each models and the marginal and ...
Kim YS, Jun BH. A study of comparative the mastication capability and life quality of elderly people using dentures or implants. J Korean Soc Dent Hyg 2011; 11(5): 629-636.
Park EM, Yu SY, Jang JH. The effect of satisfaction of dental esthetics on life quality related to oral health(OHIP-14). J Korean Soc Dent Hyg 2011; 11(6): 863-870.
Petteno D, Schierano G, Bassi F, Bresciano ME, Carossa S. Comparison of marginal fit of 3 different metal-ceramic systems: an in vitro study. Int J Prosthodont 2000; 13(5): 405-408.
Rosenstiel SF, Land MF, Fujimoto J. Contemporary fixed prosthodontics. 4th ed. St. Louis:Mosby. 2006, pp.606-608.
Anusavice KJ. Phillips'science of dental materials. 11th ed. Philadelphia:W.B. Saunders. 2003, pp.621-654.
Pierce LH, Goodkind RJ. A status report of possible risks of base metal alloys and their components. J Prosthet Dent 1989; 62(2): 234-238.
Wassell RW, Walls AWG, Steele JG. Crowns and extra-coronal restorations: materials selection. Br Dent J 2002; 192(4): 199-211.
Vigolo P, Fonzi F. An in vitro evaluation of fit of zirconium -oxide-based ceramic four-unit fixed partial dentures, generated with three different CAD/CAM systems, before and after porcelain firing cycles and after glaze cycles. J Prosthodont 2008; 17(8): 621-626.
Jahangiri L, Wahlers C, Hittelman E, Matheson P. Assessment of sensitivity and specificity of clinical evaluation of cast restoration marginal accuracy compared to stereomicroscopy. J Prosthet Dent 2005; 93(2): 138-142.
Mejia R, Tobon SM. Marginal fit of metal ceramic restorations subjected to a standardized postsoldering technique. J Prosthet Dent 2000; 83(5): 535-539.
Limkangwalmongkol P, Chiche GJ, Blatz MB. Precision of fit of two margin designs for metal-ceramic crowns. J Prosthodont 2007; 16(4): 233-237.
Foster LV. Failed conventional bridge work from general dental practice: clinical aspects and treatment needs of 142 cases. Br Dent J 1990; 168(5): 199-201.
Tjan AH, Li T, Logan GI, Baum L. Marginal accuracy of complete crowns made from alternative casting alloys. J Prosthet Dent 1991; 66(2): 157-164.
Soriani NC, Leal MB, Paulino SM, Pagnano VO, Bezzon OL. Effect of the use of die spacer on the marginal fit of copings cast in Ni-Cr, Ni-Cr-Be and commercially pure titanium. Braz Dent J 2007; 18(3): 225-230.
Campbell SD, Pelletier L. Thermal cycling distortion of metal ceramics: part I-metal collar width. J Prosthet Dent 1992; 67(5): 603-608.
Fonseca JC, Henriques GE, Sobrinho LC, de Goes MF. Stress-relieving and porcelain firing cycle influence on marginal fit of commercially pure titanium and titanium-aluminium -vanadium copings. Dent Mater 2003; 19(7): 686-691.
Lakhani SA, Ercoli C, Moss ME, Graser GN, Tallents RH. Influence of cold working and thermal treatment on the fit of implant supported metal ceramic fixed partial dentures. J Prosthet Dent 2002; 88(2): 159-169.
Hasanreisoglu U, Berksun S, Aras K, Arslan I. An analysis of maxillary anterior teeth: facial and dental proportions. J Prosthet Dent 2005; 94(6): 530-538.
Holmes JR, Bayne SC, Holland GA, Sulik WD. Considerations in measurement of marginal fit. J Prosthet Dent 1989; 62(4): 405-408.
Reich S, Kappe K, Teschner H, Schmitt J. Clinical fit of fourunit zirconia posterior fixed dental prostheses. Eur J Oral Sci 2008; 116(6): 579-584.
Wettstein F, Sailer I, Roos M, Hammerle CHF. Clinical study of the internal gaps of zirconia and metal frameworks for fixed partial dentures. Eur J Oral Sci 2008; 116(3): 272-279.
Harris IR, Wickens JL. A comparison of the fit of sparkeroded titanium copings and cast gold alloy copings. Int J Prosthodont 1994; 7(4): 348-355.
McLean JM, von Fraunhofer JA. The estimation of cement film thickness by an in vivo technique. Br Dent J 1971; 131(3): 107-111.
Fransson B, Olio G, Gjeitanger R. The fit of metal-ceramic crowns, a clinical study. Dent Mater 1985; 1(5): 197-199.
Strating H, Pameijer C, Gildenhuys RR. Evaluation of the marginal integrity of ceramometal restorations: part I. J Prosthet Dent 1981; 46(1): 59-65.
Buchanan WT, Svare CW, Turner KA. The effect of repeated firings and strength on marginal distortion in two ceramometal systems. J Prosthet Dent 1981; 45(5): 502-506.
Bridger DV, Nicholls JI. Distortion of ceramometal fixed partial dentures during the firing cycle. J Prosthet Dent 1981; 45(5): 507-514.
Campbell SD, Pelletier L. Thermal cycling distortion of metal ceramics: part I-metal collar width. J Prosthet Dent 1992; 67(5): 603-608.
Balkaya MC, Cinar A, Pamuk S. Influence of firing cycles on the margin distortion of 3 all-ceramic crown systems. J Prosthet Dent 2005; 93(4): 346-355.
Komine F, Shiratsuchi H, Kakehashi Y, Matsumura H. Influence of porcelain-firing procedures on the marginal distortion of electroformed metal-ceramic restorations. Quintessence Int 2007; 38(10): E583-E588.
Prakash P, DSJ D'Souza, Manjit Kumar, M Viswambaran. Effect of firing cycle and surface finishing on the sag resistance of long-span metal ceramic framework using base metal alloys-an in vitro study. MJAFI 2012; 68(2): 142-150.
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.