최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.37 no.7, 2013년, pp.857 - 864
A laser machining process has been applied in many manufacturing fields and it provides an excellent energy control for treating materials. However, a heat effect during laser machining can deteriorate material properties. Specifically, a thermally induced stress can be a problem in laser-machined s...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
레이저 정밀 가공은 어떤 기술인가? | 레이저 정밀 가공은 고품질의 집속 광에너지를 이용하여 재료를 미세하게 가공하는 특수 가공 기술이다. 기계적 가공 공정은 공구가 가공을 수행함과 동시에 재료와 접촉하기 때문에 열이나 마모에 의하여 재료의 열적 영향이 발생하며 이에 따라 공구의 수명이 제한적이다. | |
열처리를 통해 재료표면에 발생된 압축잔류응력의 장점은 무엇인가? | (4) 또한 압연강판의 열간가공 후, 용체화(Solid solution heat treatment)와 인공시효처리(Artificial aging)를 통해 최적의 기계적 성질을 얻을 수 있다.(5) 열처리를 통해 재료표면에 발생된 압축잔류응력은 재료의 피로 강도 향상 및 응력부식을 방지하는 등의 장점을 갖지만, 절삭가공 시에는 재료에 상당한 변형을 야기시켜 치수 정밀도가 감소하는 문제가 발생된다.(6) 또한, 압연 강재 및 강판의 경우 공정 단계에서 강한 압력으로 제작하기 때문에 반드시 잔류응력이 존재한다. |
Poprawe, R., Schulz, W. and Schmitt, R., 2010, "Hydrodynamics of Material Removal by Melt Expulsion: Perspectives of Laser Cutting and Drilling," Physics Procedia, Vol. 5, Part A, pp. 1-18.
Koc, M., Culp, J. and Altan, T., 2006, "Prediction of Residual Stress in Quenched Aluminum Block and Their Reduction Through Cold Working Processed," Journal of Materials Processing Technology, Vol. 174, Issues 1-3, pp. 342-354.
Jang, H. S., 1997, "The Handbook of Advanced Aluminum Technology," Hanlimwon.
Rogers, E. and Gutierrez-Miravete, E., 2007, "An Analysis of the Thermal Effects of Focused Laser Beams on Steel," Excerpt from the Proceedings of the COMSOL Conference 2007, Boston.
Hossain, S., Truman, C. E., Smith, D. J., Peng, R. L. and Stuhr, U., 2007, "A Study of the Generation and Creep Relaxation of Triaxial Residual Stresses in Stainless Steel," International Journal of Solid and Structure, Vol. 44, pp. 3004-3020.
Juijerm, P. and Altenberger, I., 2006, "Residual Stress Relaxation of Deep-Rolled Al-Mg-Si-Cu Alloy During Cyclic Loading at Elevated Temperature," Scripta Materialia, Vol. 55, pp. 1111-1114.
Simsir, C. and Gur, C. H., 2008, "3D FEM Simulation of Steel Quenching and Investigation of the Effect of Asymmetric Geometry on Residual Stress Distribution," Journal of Materials Processing Technology, Vol. 207, pp. 211-221.
Berger, M. C. and Gregory, J. K., 1999, "Residual Stress Relaxation in Shot Peened Timetal 21s," Material Science and Engineering A, Vol. 263, pp. 200-204.
Alberg, H. and Berglund, D., 2003, "Comparison of Plastic, Viscoelastic and Creep Models when Welding and Stress Relief Heat Treatment," Computer Methods in Applied Mechanics and Engineering, Vol. 192, pp. 5189-5208.
Schajer, G. S., 1988, "Measurement of Non-Uniform Residual Stresses Using the Hole-Drilling Method Part I-Stress Calculation Procedure," Journal of Engineering Materials and Technology, Vol. 103, pp. 157-163.
Kim, J. O., Ko, J. B., and Park, H. S., 2007, "A Study on the Measurement of Bending Constraint Force of STS304 Thin Plate Using The Load Cell," Transactions of the Korean Society of Machine Tool Engineers, Vol. 16, No. 3, p. 90.
Kim, Y.J., Song, T.K., Bae, H.Y., Song, T.K., Bae, H.Y., Lee, K.S., Park, C.Y., Yang, J.S., Huh, N.S., Kim, J.U., Park, J.S., Song, M.S., Lee, S.K., Kim, J.S., Yu, S.C. and Chang, Y.S., 2009, "Assessment of Round Robin Analyses Results on Welding Residual Stress Prediction in a Nuclear Power Plant Nozzle," Trans. Korean Soc. Mech. Eng. A, Vol. 33, No. 1, pp. 72-81.
Song, T.K., Bae, H.Y., Kim, Y.J., Lee, K.S. and Park, C.Y., 2009, "Sensitivity Analysis of Finite Element Method for Estimating Residual Stress of Dissimilar Metal Multi-Pass Weldment in Nuclear Power Plant," Trans. Korean Soc. Mech. Eng. A, Vol. 32, No. 9, pp. 770-781.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.