최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국지진공학회논문집 = Journal of the Earthquake Engineering Society of Korea, v.17 no.5 = no.93, 2013년, pp.237 - 243
이광호 (인하대학교 건축학부) , 정성훈 (인하대학교 건축학부)
In the Korean Building Code (KBC), the Design Eccentricity involves the torsional amplification factor (TAF), and the inherent and accidental eccentricities. When a structure of less than 6-stories and assigned to seismic design category C or D is designed using equivalent static analysis method, bo...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
정적편심이란 무엇인가? | 건축구조설계기준 (KBC)[1,2]에 규정된 설계편심은 정적편심 (inherent eccentricity)에 우발편심 (accidental eccentricity)과 비틀림 증폭계수 (torsional amplification factor)를 고려하여 결정된다. 정적편심은 내진설계 직전의 질량중심 (center of mass, CM)과 강성중심 (center of rigidity, CR)간의 거리로서 건물 고유의 평면 비정형성을 나타낸다. 우발편심은 지진력 작용방향에 직각인 평면치수의 5%로 가정된 거리로서, 수직축에 대한 지반운동의 회전요소, 계산된 강성과 실제 강성의 차이, 고정하중과 활하중 질량분배의 불확실성과 같은 명확하게 고려되지 않은 요인들의 영향을 보완하기 위하여 사용된다. | |
우발편심은 무엇을 위해 사용되는가? | 정적편심은 내진설계 직전의 질량중심 (center of mass, CM)과 강성중심 (center of rigidity, CR)간의 거리로서 건물 고유의 평면 비정형성을 나타낸다. 우발편심은 지진력 작용방향에 직각인 평면치수의 5%로 가정된 거리로서, 수직축에 대한 지반운동의 회전요소, 계산된 강성과 실제 강성의 차이, 고정하중과 활하중 질량분배의 불확실성과 같은 명확하게 고려되지 않은 요인들의 영향을 보완하기 위하여 사용된다. 비틀림 증폭계수는 단주기 및 주기 1초의 설계스펙트럼 가속도 (SDS, SD1)와 건물의 내진등급에 따라 결정된 내진설계범주가 C 또는 D로 분류되고 높이가 20m 또는 6층 미만의 평면 비정형 건물 중 비틀림 비정형성이 존재하는 건물을 등가정적해석법을 사용하여 설계할 때에만 사용된다. |
Architectual Institute of Korea, Korean building code, Architectual Institute of Korea; c2006, p.121.
Architectual Institute of Korea, Korean building code, Architectual Institute of Korea; c2009, p.106.
ASCE/SEI 7-10, Minimum Design Loads for Buildings and Other Structures, American Society of Civil Engineers; c2010, p.80-92.
Structural Engineers Association of California, Recommended lateral force requirements and commentary, San Francisco; c1999.
International Conference of Building Officials, Uniform Building Code, California, USA; c1991.
International Conference of Building Officials, Uniform Building Code, California, USA; c1994.
International Conference of Building Officials, Uniform Building Code, California, USA; c1997; p.2-15.
Federal Emergency Management Agency, NEHRP guidelines for the seismic rehabilitation of buildings, Report FEMA 273, Washington D.C.; c1997; p.3-2.
Federal Emergency Management Agency, NEHRP recommended provisions for seismic regulations for new buildings and other structures, Report FEMA 302, Washington D.C.; 1997, p.66.
Structural Engineers Association of California, Recommended lateral force requirements and commentary, San Francisco; c1999; p.13, p.112, p.121.
Federal Emergency Management Agency, Prestandard and commentary for the seismic rehabilitation of buildings, Report FEMA 356, Washington D.C.; c2000; p.3-3.
Federal Emergency Management Agency, NEHRP recommended provisions for seismic regulations for new buildings and other structures, Report FEMA 368, Washington D.C.; c2000; p.76.
ASCE/SEI 7-02, Minimum Design Loads for Buildings and Other Structures, American Society of Civil Engineers; c2002; p.148.
Federal Emergency Management Agency, NEHRP recommended provisions for seismic regulations for new buildings and other structures, Report FEMA 450, Washington D.C.; c2003; p.90.
ASCE/SEI 7-05, Minimum Design Loads for Buildings and Other Structures, American Society of Civil Engineers; 2006; p.130, p.214.
Jeong SH, Lee KH. A study on the relationship between the eccentricity and the level of damage in the seismic response of buildings with plan irregularity. Earthquake Engineering Society of Korea. 2010 Jun;14(3):49-57.
Stathopoulos KG, Anagnostopoulos SA. Accidental design eccentricity: Is it important for the inelastic respose of buildings to strong motion. Soil Dynamics and Earthquake Engineering. 2010 Sep;30(9):782-797.
Jeong SH, Elnashai AS. Analytical modeling of inelastic seisimic response of RC structure. J. Struct. Eng. 2006:132(9);1482-1490.
Elanshai AS, Papanikolaou V, Lee DH. ZEUS-NL Users Manual, University of Illinois at Urbana-Champaign/Mid-America Earthquake Center; c2002.
Elnashai AS, Elghazouli AY. Performance of composite steel/ concrete membersunder earthquake loading, part I: analytical model. Earthquake Engineering and Structural Dynamics. 1993: 22(4):314-345.
Elnashai AS, Izzuddin BA. Modeling of material nonlinearities in steel structures subjected to transient dynamic loading. Earthquake Engineering and Structural Dynamics. 1993;22(6):509-532.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.