최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기韓國鋼構造學會 論文集 = Journal of Korean Society of Steel Construction, v.25 no.4 = no.125, 2013년, pp.441 - 449
이승혜 (세종대학교, 건축공학과) , 이재홍 (세종대학교, 건축공학과)
Damaged structures change the value of natural properties. The purpose of this study is to detect damage using the difference of natural properties between the healthy state and the damaged state. Anti-optimization method is used to find the conditions that maximize the difference in characteristics...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
구조 건전성 모니터링은 어떻게 구분하는가? | 구조 건전성 모니터링은 구조물의 운영 상태 및 측정의 목적과 범위를 설정, 측정할 매개 변수(parameter)와 센서의 종류·위치·개수 등을 결정, 구조물의 특성 값 추출 및 압축, 통계적 모델 구축의 4단계로 구분할 수 있다. 여기서 마지막 단계인 통계적 모델 구축이란, 세 번째 단계에서 추출 한 특성 값을 이용하여 손상 정도를 파악할 수 있는 알고리즘을 구축하는 것을 말한다. | |
구조물의 손상은 어떤 요인에 의해 일어나는가? | 환경적 영향에 따른 재료의 노화, 사용하중(피로, 부식 등), 혹은 예측할 수 없는 충격하중, 지진하중, 풍하중 등의 외부하중에 의해 구조물은 손상을 입는다[1]. 구조물의 손상을 탐지하고 그것의 경중, 영향, 진행 정도를 파악하기 위한 구조건전성 모니터링(Structural Health Monitoring) 분야가 지속적으로 발전하였다. | |
구조건전성 모니터링의 목적은? | 환경적 영향에 따른 재료의 노화, 사용하중(피로, 부식 등), 혹은 예측할 수 없는 충격하중, 지진하중, 풍하중 등의 외부하중에 의해 구조물은 손상을 입는다[1]. 구조물의 손상을 탐지하고 그것의 경중, 영향, 진행 정도를 파악하기 위한 구조건전성 모니터링(Structural Health Monitoring) 분야가 지속적으로 발전하였다. Aktan 등[2]은 논문에서 건전성 모니터링(Health Monitoring)이란 구조물의 운영 및 하중 환경을 측정하거나, 혹은 구조물의 원활한 작동, 사용성, 안전/ 신뢰성 등에 영향을 줄 수 있는 갑작스러운 사고, 이상, 노후및 손상 등의 징후를 탐지하고 평가할 수 있는 중요한 응답을 측정하는 것이라고 정의하였다. |
Achenbach, J.D. (2009) Structural health monitoring - What is the prescription, Mechanics Research Communications, Vol. 36, No. 2, pp.137-142. ASCE, Vol. 11, No. 1, pp.48-58.
Aktan, A.E., Catbas, F.N., Grimmelsman, K.A., and Tsikos, C.J. (2000) Issues in infrastructure health monitoring for management, Journal of Engineering Mechanics, ASCE, Vol 126, No.7, pp.771-724.
Shon, H., Farrar, C.R., Hemez, F.M., Shunk, D.D., Stinemates, D.W., Nadler, B.R., and Czarnecki, J.J. (1996) A Review of structural health monitoring literature: 1996-2001, Los Alamos National Laboratory Report LA-13070-MS.
은희창, 정장용 (2010) 추정된 물리적 특성변화에 의한 구조물의 손상탐지에 관한 연구, 대한건축학회논문집 구조계, 대한건축학회, 제26권, 제4호, pp.13-20. Eun, H.C. and Chung, C.Y. (2010) Damage detection of structures based on estimated physical characteristic changes, Journal of the Architectural Institute of Korea, Vol. 26, No. 4, pp.13-20 (in Korean).
Wang, X., Hu, N., Fukunaga, H., and Yao, Z.H. (2001) Structural damage identification using static test data and changes in frequencies, Engineering Structures, Vol. 23, No. 6, pp.610-621.
Bakhtiari-Nejad, F., Rahai, A., and Esfandiari, A. (2005) A structural damage detection method using static noisy data, Engineering Structures, Vol. 27, No. 12, pp.1784-1793.
Yam, L.H., Li, Y.Y., and Wong, W.O. (2002) Sensitivity studies of parameters for damage detection of plate-like structures using static and dynamic approaches, Engineering Structures, Vol. 24, No. 11, pp.1465-1475.
Doebling Scott, W., Farrar Charles, R., Prime Michael, B., and Shevitz Daniel, W. (1996) Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: A Literature review, Los Alamos National Laboratory report LA-13070-MS.
배충열, 은희창, 이민수, 곽노현 (2007) 정적 변위곡률에 의한 손상된 보의 손상탐색, 대한건축학회논문집 구조계, 대한건축학회, 제23권, 제8호, pp.59-66. Bae, C.Y., Eun, H.C., Lee, M.S., and Gwak, N.H. (2007) Damage detection of damaged beam by static displacement curvature, Journal of the Architectural Institute of Korea, Vol. 23, No. 8, pp.59-66 (in Korean).
Lee, J., Haftka, R.T., Griffin, O.H., Watson, Jr., L.T., and Sensmeier, M.D. (1994) Detecting delaminations in a composite beam using antioptimization, Structural Optimization, Vol. 8, No. 2-3, pp.93-100.
최일윤, 조효남 (2002) 정적변위를 이용한 교량의 손상도 평가기법, 한국강구조학회 논문집, 한국강구조학회, 제14권, 제4호, pp.641-646. Choi, I.Y. and Cho, H.N. (2002) A Damage assessment technique for bridge using static displacements, Journal of Korean Society of Steel Construction, KSSC, Vol. 14, No. 4, pp. 641-646 (in Korean).
※ AI-Helper는 부적절한 답변을 할 수 있습니다.