최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기電磁波技術 : 韓國電磁波學會誌 = The Proceedings of the Korean Institute of Electromagnetic Engineering and Science, v.24 no.4, 2013년, pp.64 - 70
정재영 (서울과학기술대학교)
초록이 없습니다.
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
전도성 섬유는 제작 방법에 따라 어떻게 구분되는가? | 이에 적합한 전도성 섬유는 제작 방법에 따라 크게 금속 섬유사와 도금 섬유사로 나눌 수 있다. 금속 섬유사는 [그림 3] (a)와 같이 가느다란 금속 와이어를 일반 섬유에 꼬아(threading) 만든 형태이다. | |
BAN 표준에서 가용 주파수로 알려진 대역은 어떤 것들이 있는가? | Body Area Network(BAN)으로 알려진 이 무선 네트워크는[그림 1]과 같이 사용자 인체 내부(in-body), 외부(onbody)에 무선 송수신기를 장착하여 통신을 꾀하는 기술 전반을 포함하며, 용도에 따라 의료용과 비의료용으로 구분한다. 현재 대두되고 있는 가용 주파수는 400 MHz 대역의 MICS(Medical Implant Communication Service), 900 MHz 대역의 ISM(Industry, Science, Medical), 2.4 GHz 대역의 ISM 또는 MBAN(Medical Body Area Network), 3~10 GHz의 UWB(Ultra-wideband) 등이 있다. BAN 표준은 현재 저전력(<100 mW), 근거리(<3 m), 저용량(수 백 Kbps~수 Mbps) 응용에 맞춰져 있으나, 향후 그 응용분야가 확장되면서 빠르게 고사양 통신 표준으로 진화할 것으로 예상 된다. | |
전도성 섬유 안테나 어레이는 어떻게 제작되었는가? | [그림 5] (a)는 미국 오하이오 주립대에서 발표한 전도성 섬유 안테나 어레이이다[10] . 이 안테나는 polydimethylsiloxane(PDMS) substrate 위에 은도금된 전도성 섬유를 봉제하여 제작하였다. 안테나의 방사판뿐 아니라 급전 라인까지 전도성 섬유로 제작하였고, 동작주파수인 2.4 GHz에서 안테나 이득이 기존 동판 제작 안테나와 유사한 성능을 나타냄을 보였다. |
"Wearable Technology Market - Global Scenario, Trends, Industry Analysis, Size, Share and Forecast, 2012-2018", Transparency Market Research, 2013.
"IEEE 802.15 WPAN task group 6 body area networks", www.ieee802.org/15/pub/TG6.html
Z. Wang, L. Zhang, D. Psychoudakis, and J. L. Volakis, "Flexible textile antennas for body-worn communication", Proc. IEEE iWAT, pp. 205-208, 2012.
H. C. Chen, K. C. Lee, J. H. Lin, and M. Koch, "Comparison of electromagnetic shielding effectiveness properties of diverse conductive textiles via various measurement techniques", J. Mat. Proc. Tech., vol. 192, pp. 549-554, 2007.
장순호, "섬유산업의 IT 융합화 기술동향", 한국 섬유개발연구원, 2009년.
Y. Ouyang, W. J. Chappell, "High frequency of electro- textiles for wearable antenna applications", IEEE Trans. Antennas Propag., 56(2), 2008.
E. Moradi, T. Bjorninen, L. Ukkonen, and Y. Rahmat- Samii, "Effects of sewing pattern on the performance of embroidered dipole-type RFID tag antennas", IEEE Antennas. Wireless Propg. Lett., vol. 11, pp. 1482-1485, 2012.
http://www.bmsri.com
Z. Wang, L. Zhang, Y. Bayram, and J. L. Volakis, "Embroidered conductive fibers on polymer composite for conformal antennas", IEEE Trans. Antennas Propag., 60(9), pp. 4141-4147, 2012.
T. F. Kennedy, P. W. Fink, A. W. Chu, N. J. Champagne, G. Y. Lin, and M. A. Khayat, "Body-worn E-textile antennas: The good, the low-mass, and the conformal", IEEE Trans. Antennas Propag., 57(4), pp. 910-918, 2009.
www.pharad.com, www.patria.fi, www.esa.int
J. Krupka, D. Nguyen, and J. Mazierska, "Microwave and RF methods of contactless mapping of the sheet resistance and the complex permittivity of conductive materials and semiconductors", Meas. Sci. Tech., vol. 22, 085703, 2011.
J. Y. Chung, N. K. Nahar, L. Zhang, Y. Bayram, K. Sertel, and J. L. Volakis, "Broadband radio frequency conductivity measurement technique for engineered composites", IET Microw. Antennas Propag., 6(4), pp. 371-376, 2012.
G. W. Hanson, "Fundamental transmitting properties of carbon nanotube antennas", IEEE Trans. Antennas Propag., 53(11), pp. 3426-3435, 2005.
I. Ahmed, E. H. Khoo, E. Li, and R. Mittra, "A hybrid approach for solving coupled Maxwell and Schrodinger equations arising in the simulation of nano-devices", IEEE Ant. Wireless Propag. Lett., vol. 9, pp. 914-917, 2010.
S. Z. Zhu and R. Langley, "Dual-band wearable textile antenna on an EBG substrate", IEEE Trans. Antennas Propag., 57(4), pp. 926-935, 2009.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.