최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. B. B, v.37 no.11 = no.338, 2013년, pp.1015 - 1022
김정호 (인하대학교 기계공학부) , 강도원 (인하대학교 기계공학부) , 김동섭 (인하대학교 기계공학부)
This study simulates the operation of a 200 kW class micro gas turbine that is currently under development. The performance and operating characteristics depending on the load control scheme (constant turbine inlet temperature versus constant turbine exit temperature) and ambient condition were inve...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
서지마진이란 무엇인가? | 서지마진이란 압축기 선도에서 작동점이 서지에 얼마나 근접해 있는지를 나타내는 척도이다. 서지 마진은 다음과 같이 압력비와 유량에 의한 식으로 정의한다. | |
마이크로 가스터빈의 설계 시 압력비는 얼마인가? | 따라서 단순사이클로는 열효율이 낮기 때문에 재생기를 사용하여 재생사이클로 설계 되고 재생기의 효과를 충분히 발휘하기 위하여 낮은 압력비로 설계된다. 마이크로 가스터빈은 대체로 압력비 3~5 정도로 설계된다. | |
분산발전에 대한 관심이 증대되고 있는 이유는 무엇인가? | 세계적으로 에너지 자원의 고갈 및 환경오염의 문제가 대두되고 있다. 또한 국제 원유가격의 상승으로 연료의 가격 또한 상승하였다. 이러한 상황에서 높은 효율과 친환경적인 발전시스템의 개발이 필요하다. 특히 전력이송에 의한 손실이 적고 에너지 수요에 대한 대응이 빠른 분산발전 (distributed generation)의 관심과 필요성이 높아지고 있다. |
Rodgers, C. and Watts, J. and Nichols, K. and Brent, R., 2001, "Microturbines, in Distributed Generation," Borbely, A.M. and Kreider, J., ed., CRC Press, pp.119-150.
Tan, E. S. and Zulhairi, M. A., 2012, " Feasibility of Biodiesel as Microturbine Alternative Fuel Through Atomization Characteristics Study," ASME GT2012-68039.
Visser, W. P. J., Shakariyants, S. and De Later, M. T. L., 2012, "Performance Optimization of a 3kW Microturbine for CHP Applications," ASME GT2012-68686.
Kim, B. S., Gil, Y. W. and Hong, W. P., 2009, " The Energy Performance & Economy Efficiency Evaluation of Microturbine Installed in Hospital Buildings," Journal of the Korean Institute of Illuminating and Electrical Installation Engineers, Vol. 23, No, 12, pp. 176-183.
Hong, W. P., Kim, B. S. and Cho, Y. S., 2010, " The Energy Performance Analysis of Micro Gas Turbine in Large Scale Store," Journal of the Korean Solar Energy Society, Vol. 30, No. 2, pp. 454-459.
Oh, J. S. and Lee, H. S., 2002, " Prototype Development of a 75kW class Microturbine - Design/Manufacture and Self-Sustaining Test-," Proceedings of 2012 Annual Meeting of Korean Fluid Machinery Association, pp. 307-313.
Lee, J. J. and Kim, T. S., 2004, "Analysis of Operation Performance of a Micro Gas Turbine Generator System," Journal of Fluid Machinery, Vol. 8, No. 5, pp. 13-21.
Kim, J. H., Jeon, Y. J., Kim, T. S. and Ro, S. T., 1999, "Analysis of the Dynamic Characteristics of a Small Regenerative Gas turbine," Trans. Korean Soc. Mech. Eng. B, Vol. 23, NO. 6, pp. 769-777.
Park, J. H., 2011, "Practical Application of a 200kW Class Micro Gas Turbine Cogeneration System," Proceedings of 2011 Annual Meeting of Korean Fluid Machinery Association, pp. 491-494.
Enter Software, Gasturb 9.0, 2001.
Bruckner, R. J. and Puleo, B. J., 2008, "Compliant Foil Journal Bearing Performance at Alternate Pressures and Temperatures," ASME paper GT2008-50174.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.