최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기資源리싸이클링 = Journal of the Korean Institute of Resources Recycling, v.22 no.1, 2013년, pp.29 - 35
백상호 (과학기술연합대학원대학교) , 전호석 (한국지질자원연구원) , 김수강 (한국지질자원연구원) , 이광훈 (한국해양대학교)
The study on the recovery of Nylon from a radiator of End-of-Life Vehicle was conducted by using triboelectrostatic separation technique. For the effective separation of the sample(Nylon, PP glass), charge polarity and amount of each sample with various charging materials have been investigated by f...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
압축된 차량을 뭐라고 하나? | 3) 이 중 10만 여대가 중고차로서 수출되고 대부분은 해체되어 재활용 대상이 된다. 폐자동차의 해체공정을 살펴보면, 최초 해체업자에게 인도되어 유용 부품이 회수된 후, 압축하여 슈레더 업체로 옮겨지며 이렇게 압축된 차량을 press body라고 한다. Press body에서 철, 비철금속 등의 유가금속을 회수하기 위한 슈레더 공정 을 거치고 나면, 재이용이 곤란한 합성수지, 유리, 고무 등의 잔재물이 남는데, 이러한 잔재물을 ASR(Automobile Shredder Residue) 또는 SD(Shredder Dust)라고 한다. | |
ASR은 무엇으로 구성되어있는가? | Press body에서 철, 비철금속 등의 유가금속을 회수하기 위한 슈레더 공정 을 거치고 나면, 재이용이 곤란한 합성수지, 유리, 고무 등의 잔재물이 남는데, 이러한 잔재물을 ASR(Automobile Shredder Residue) 또는 SD(Shredder Dust)라고 한다. 일반적으로 자동차 중량의 약 25%를 차지하는 ASR은 보통 플라스틱 33%, 섬유 및 스폰지 32%, 고무 10%, 금속 4%, 유리 및 나무 4% 그리고 토사류 및 기타 17%로 구성되어 있다. 이러한 ASR은 금속에 비해 재활용률이 낮고 관련 기술이나 처리 기반이 구축되어 있지 않아 대부분 소각이나 매립에 의하여 처리되고 있다. | |
press body 슈레더 공정 을 거치고 나면 무엇이 남는가? | 폐자동차의 해체공정을 살펴보면, 최초 해체업자에게 인도되어 유용 부품이 회수된 후, 압축하여 슈레더 업체로 옮겨지며 이렇게 압축된 차량을 press body라고 한다. Press body에서 철, 비철금속 등의 유가금속을 회수하기 위한 슈레더 공정 을 거치고 나면, 재이용이 곤란한 합성수지, 유리, 고무 등의 잔재물이 남는데, 이러한 잔재물을 ASR(Automobile Shredder Residue) 또는 SD(Shredder Dust)라고 한다. 일반적으로 자동차 중량의 약 25%를 차지하는 ASR은 보통 플라스틱 33%, 섬유 및 스폰지 32%, 고무 10%, 금속 4%, 유리 및 나무 4% 그리고 토사류 및 기타 17%로 구성되어 있다. |
Jae-Hyun Oh etc., 2010: Necessity and Background of the Metal Recycling from Urban Mine Resources, Korean Institute of Resources Recycling, 19(5), pp. 13-24.
Jeong Hyeon Tae etc., 2003: A Study on the Kinetics of Thermal Degradation of Automobile Shredder Residue, Korea Society of Waste Management, 20(4), pp. 415-422.
Korea Automobile Manufacturers Association, 2010: statistical data
Ho-Seok Jeon etc., 2006: The Development of Material Separation Technique for Recycling of Waste Car Tail Lamp, Korean Institute of Resources Recycling, 15(6), pp. 25-32.
Ho-Seok Jeon etc., 2006: The Development of Triboelectrostatic Separation Technique for Recycling of Seaweed Drying Waste Plastic, Korea Society for geosystem engineering, 43(6), pp. 579-584.
Chul-Hyun Park etc., 2006: A Study on Charging Properties and Tribo Series of Plastic by Tribo-charging, Korea Society for geosystem engineering, 43(6), pp. 1-10.
Dr. Michael B. Biddle, 1999: Electrosatatic separation, APC Durables recycling workshop , pp. 118-127.
Kelly E. G., Sottiswood D. J., 1988: The theory of electrostatic separations : A Review, Part, Fundamentals, Minerals Engineering, 12(1), pp. 33-46.
Manouchehri H. R., 2000: Review of Electrical separation methods, Mineral and Metallurgical Processing, 17, pp.23-36.
Mihai Lungu, 2004: Electrical separation of plastic materials using the triboelectric effect, Minerals Engineering, 17, PP. 69-75.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.