최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.37 no.12, 2013년, pp.1453 - 1463
현홍철 (서강대학교 기계공학과) , 이진행 (한국원자력연구원) , 이형일 (서강대학교 기계공학과) , 김대현 (서울과학기술대학교 융합기술대학원) , 한준희 (한국표준과학연구원)
In this study, we investigated the effect of the indenter geometry on the crack characteristics by indentation cracking test and FEA. We conducted various cohesive finite element simulations based on the findings of Lee et al. (2012), who examined the effect of cohesive model parameters on crack siz...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
CZM가 개발된 원리는? | CZM은 원자들간의 작용력과 거리 사이의 관계에 기초해 개발된 것으로, 미소크기의 재료거동 모사에 적합하다. 압입 균열시험과 같이 균열 생성 면이 예상되는 해석에서는 CZM이 유용하게 사용될 수 있다. | |
압입시험의 장점은? | 즉, 압입시험에 의해 발생하는 다수 균열시스템과 표준방법 (SENB: Single-Edge Notched Beam, CT: Compact Tension 시험 등)으로 얻어지는 단일 균열시스템을 연결 시키려는 노력이 계속 수행되어왔다. 압입시험은 전통적인 파괴인성 평가법과 달리 작은 시편에 바로 적용할 있으며, 한번의 압입만으로 쉽고 빠르게 파괴인성을 측정할 수 있어 시간 및 비용 측면에서 상당히 유리한 평가 법이다. 압입 파괴인성 평가에 주로 사용되는 수식은 Lawn 등(1)에 의해 제시됐다. | |
표면균열 상태만 가지고 최종 균열형상을 판단할 수 없는 이유는? | 또한 α 를 얻기 위한 구체적인 방법도 제시하지 않았다. 한편 실 압입시험에서는 압입시험 중 균열생성 및 진전 과정을 살펴보기 힘들다. 따라서 표면균열 상태만 가지고 최종 균열형상을 판단할 수 없다. |
Lawn, B.R., Evans, A.G. and Marshall, D.B. 1980, "Elastic / Plasic Indentation Damage in Ceramics: the Median/Radial Crack System," Journal of the American Ceramic Society, Vol. 63, pp. 574-581.
Anstis, G.R., Chantikul, P., Lawn, B.R. and Marshall, D.B., 1981, "A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: I, Direct Crack Measurements," Journal of the American Ceramic Society, Vol. 64, pp. 533-538.
Hill, R., 1950, The mathematical theory of plasticity. Oxford University Press, Oxford, UK.
Lee, J.H., Gao, Y., Johanns, K.E. and Pharr, G.M., 2012, "Cohesive Interface Simulations of Indentation Cracking as a Ftracture Toughness Measurement Method for Brittle Materials," Acta Materialia, Vol. 60, pp. 5448-5467.
Dukino, R.D. and Swain, M.V., 1992, "Comparative Measurement of Indentation Fracture Toughness with Berkovich and Vickers Indenters," Journal of the American Ceramic Society, Vol. 75, pp. 3299-3304.
Ouchterlony, F., 1976, "Stress Intensity Factors for the Expansion Loaded Star Crack," Engineering Fracture Mechanics, Vol. 8, pp. 447-448.
Laugier, M.T., 1985, "The Elastic/Plastic Indentation of Ceramics," Journal of Materials Science Letters, Vol. 4, pp. 1539-1541.
Ponton, C.B. and Rawlings, R.D., 1989a, "Vickers Indentation Fracture Toughness Test: Part 1. Review of Literature and Formulation of Standardised Indentation Equations," Materials Science and Technology, Vol. 5, pp. 865-872.
Ponton, C.B. and Rawlings, R.D., 1989b, "Vickers Indentation Fracture Toughness Test: Part 2. Application and Critical Evaluation of Standardised Indentation Toughness Equations," Materials Science and Technology, Vol. 5, pp. 961-976.
Quin, G.D. and Bradt, R.C., 2007, "On the Vickers Indentation Fracture Toughness Test," Journal of the American Ceramic Society, Vol. 90, pp. 673- 680.
Niihara, K., 1983, "A Fracture Mechanics Analysis of Indentation-induced Palmqvist Cracks in Ceramics," Journal of Materials Science Letters, Vol. 2, pp. 221-223.
Miyoshi, T., 1985, "A Study on Evaluation of $K_{Ic}$ for Structural Ceramics," Transactions of the Japan Society of Mechanical Engineering, Vol. 51, pp. 2489-2497.
Zhang, W. and Subhash, G., 2001, "Finite Element Aalysis of Iteractiong Vckers Identations on Bittle Materials," Acta Materialia, Vol. 49, pp. 2961-2974.
Tang, Y., Yonezu, A., Ogasawara, N., Chiba, N. and Chen, X., 2008, "On Radial Crack and Half-penny Crack Induced by Vickers Indentation," Proceedings of the Royal Society A, Vol. 464, pp. 2967-2984.
Gao, Y.F. and Bower, A.F., 2004, "A Simple Techniques for Avoiding Convergence Problems in Finite Element Simulations of Crack Nucleation and Growth on Cohesive Interfaces," Modelling and Simulation in Materials Science and Engineering, Vol. 12, pp. 453-563.
Hutchinson, J.W. and Evans, A.G., 2000, "Mechanics of Materials: Top-down Approaches to Fracture," Acta Materialia, Vol. 48, pp. 125-135.
Williams, J.G., 2002, "Analytical Solutions for Cohesive Zone Models," Journal of the Mechanics and Physics of Solids, Vol. 36, pp. 809-825.
Jin, Z. and Sun C.T., 2005, "Cohesive Zone Modeling of Interface Fracture in Elastic Bi-materials," Engineering Fracture Mechanics, Vol. 72, pp. 1805-1817.
ABAQUS User's Manual, Version 6.11, 2012, Dassault Systemes Simulia Corp., Providence, RI, USA.
Maerky, C., Guillou, M.-O., Henshall, J.L. and Hopper, R.M., 1996, "Indentation hardness and fracture toughness in single crystal TiC0.96. Materials Science and Engineering A, Vol. 209, pp. 329-336.
Jang, J. and Pharr, G.M., 2008, "Influence of Indenter Angle on Cracking in Si and Ge During Nanoindentation," Acta Materialia, Vol. 56, pp. 4458-4469.
Oliver, W. C. and Pharr, G. M., 1992, "An Improved Technique for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments," Journal of Materials Research, Vol. 7, pp. 1564-1583.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.