최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기항공우주기술 = Aerospace engineering and technology, v.12 no.2, 2013년, pp.48 - 56
유원영 (한국항공우주연구원 위성구조팀) , 임재혁 (한국항공우주연구원 위성구조팀) , 손동우 (한국해양대학교 기계에너지시스템공학부) , 김선원 (한국항공우주연구원 위성구조팀) , 김성훈 (한국항공우주연구원 위성구조팀)
In this paper, the equivalent elastic properties of fiber reinforced plastic laminar are investigated using various homogenization schemes. Although there are several methods for predicting the equivalent elastic properties such as analytical formula or semi-empirical formula, most of them have some...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
시편시험이 불가능한 경우 등가탄성계수를 어떻게 도출하는가? | 이러한 구조해석을 위해 필요한 복합재료의 기계적 물성은 섬유(fiber)와 기지(matrix)의 종류, 혼합비율에 따라 변화하며 필요 시 시편시험을 통해 얻을 수 있다. 그러나 복합재료의 시편시험이 불가능한 경우에는 체적기반 혼합기법(rule of mixture, ROM)[3], Hashin-Rosen[4]과 같은 해석식, Halphin-Tsai[5]과 같은 준실험식을 활용해서 등가탄성계수를 도출한다. | |
복합재료의 등가탄성계수를 예측하는 방법은 어떤 법칙을 사용하는가? | 복합재료의 등가탄성계수를 예측하는 방법은 섬유와 기지가 특정방향으로 잘 정렬되어있다고 가정하고 일정변형률 및 일정응력을 가해 등가물성을 유도한 Voigt와 Reuss에 의한 혼합법칙이 널리 사용되어왔다[2]. | |
응력, 변형률 및 재료강성의 관계는 어떤식으로 나타내지는가? | σmn = Cmnpq εpq (m,n,p,q= 1,2,3) (1) 여기서 응력 σmn, 변형률 εpq은 2차 텐서, 재료 강성 Cmnpq는 4차 텐서이다. 응력 및 변형률 텐서는 대칭(σmn = σnm , εpq = εqp)이며, Cmnpq의 경우 m, n, p, q의 위치를 모두 바꾼다고 하더라고 Cmnpq의 행렬과 같아진다. |
전형열, 김정훈, 박종석, 박근주, "탄소복합재를 이용한 위성 패널의 열해석", 항공우주기술, 제 10권, 제2호, 2011, pp. 114-120.
이대길, 정명영, 최진호, 전성식, 장승환, 오제훈, 복합재료, 홍릉과학출판사, 2007
Hashin, Z. and Rosen, B.W., "The Elastic Moduli of Fiber-Reinforced Materials," The Transactions of the Americal Society of Mechanical Engineers: Journal of Applied Mechanics, Vol. 16. No. 5, 1976, pp. 1-10.
Halpin, J.C. and Tsai, S.W., "Effect of Environmental Factors on Composite Mateirals," AFML0TR 67-423, June, 1969.
Sun, C.T., and Vaidya R.S., "Prediction of Composite Material Properties from a Representative Volume Element," Composite Science and Technology, Vol. 56, 1996, pp. 171-179.
Hollister, S.J. and Kikuchi, N., "A Comparison of Homogenization and Standard Mechanics Analysis for Periodic Porous Composite," Computational Mechanics, Vol. 10, 1992, pp. 73-95.
Li, S. and Wang, G., "Introduction to Micromechanics and Nanomechanics," World Scientific Pub., 2008
Choi, G.P., Sohn, D., Woo, C.H., Lee, S.-H., Ahn, S.H., and Cho, Y.-S., "Qualitative Verification of the Dispersion Level in Nano-Composite and Its Application to YD-128/MWCNT Composite to Assess the Wear Characteristics with respect to the Dispersion level," Journal of Mechanical Science and Technology, Vol. 27, 2013, pp. 3131-3138.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.