최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국유화학회지 = Journal of oil & applied science, v.31 no.4, 2014년, pp.679 - 687
이익수 (서울과학기술대학교, 에너지환경대학원) , 김낙주 (서울과학기술대학교, 에너지환경대학원) , 박대원 (서울과학기술대학교, 에너지환경대학원)
In this study, a new paint which is able to resist the cavitation erosion is tried to be developed by using urethane added with nano particles such as multi-wall and single-wall carbon nano tube and spherical and fiber type graphite. The new paint synthesized was characterized with physical properti...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
현재 국내에서 사용되는 캐비테이션 저항 코팅 도료의 문제점은? | 캐비테이션에 의한 피도막의 손상을 줄이기 위하여 프로펠러 형태에 대한 연구, Rudder 구조에 대한 연구, 프로펠러와 Rudder 재질, 구조물에 따른 형태, 부착물에 의한 연구 등에 대해 논문과 학회지를 통해 발표되고 있다.10-14 캐비테이션에 의한 피도막의 손상을 줄이기 위한 캐비테이션 저항 코팅 도료는 선박의 스크류, 펌프, 등 유체가 흐름에 의해 캐비테이션 현상에 의해 침식이 심한 장비15 혹은 소재에 사용되는 도료로 양은 미미하나 매우 고가일 뿐 아니라 기술적인 난이도가 매우 높아 외국의 주요 제품이 장악하고 있는 시장으로 국산화가 매우 시급히 요구되고 있다. | |
논문에서 사용한 나노 입자 중 성능과 가격을 모두 고려했을 때 가장 최적의 캐비테이션용 도료라 판단된 것은 무엇인가? | 또한 CNT에서는 Single wall type의 캐비테이션 저항성(t50 286min)이 Multi wall보다는 더 높은 것으로 관찰되었다. Single wall CNT의 경우 제품의 가격이 상당히 고가라서 가격 경쟁력을 감안하면 적용이 어렵다고 판단되어 나노 입자중에서 가격 및 캐비테이션 저항성을 감안하면 가장 최적의 나노 입자는 Fiber type의 Graphite로 판단된다. 도료의 작업성 평가에서 수동 작업에 의해 제작된 표면은 매끈한 표면을 가지고 있으나 Spray 작업에 의해 제작된 표면은 표면이 균일하지 않으며 Spray시 발생된 Dust가 표면에 고착된 형태로 관찰되었다. | |
캐비테이션에 의한 피도막의 손상이란 무엇인가? | 최근 선박도료에서 캐비테이션에 의한 피도막의 손상을 최소화하기 위한 연구가 활발히 진행되고 있다. 캐비테이션에 의한 피도막의 손상은 유체의 흐름에 의한 부분적인 진공현상이 발생하여 기체를 포함한 액체가 표면에 계속적인 충격을 가하여 도료표면이 손상되는 현상을 말한다.1,2 주로 선박의 경우 빠른 운항속도, 선박의 초대형화, 프로펠러 최대화에 따라 현재 LNG선, 컨테이너선 등 주요 선박에서 대부분 발생되고 있다. |
Bu-Geun Paik, Kyung-Youl Kim, Jong-Woo Ahn, Sunho Park, Jaekyung Heo and Byeong-Seok, Cavitation Observation and Visualization of the Gap Flows on a Rudder Influenced by Propeller Slipstream and Hull Wakes, Journal of the Society of Naval Architects of Korea, Vol. 45, No. 3, 2008
Bu-Geun Paik, Kyung-Youl Kim, Ki-Sup Kim, Tae-Gyu Kim, Kyung-Rae Kim, Young-Hun Jang and Sang-Uk Lee, Development of New Cavitation Erosion Test Method for Analyzing the Durability of Erosion Resistance Paint, Journal of the Society of Naval Architects of Korea, Vol. 47, No. 2, 2010
Shaoshi Dai, Bassam A. Younis, Liping Sun, Large-Eddy Simulations of cavitation in a square surface cavity, Applied Mathematical Modelling, 2014
G.L. Garcia, V. Lopez-Rios, A. Espinosa, J. Abenojar, F. Velasco, A. Toro, Cavitation resistance of epoxy-based multilayer coatings: Surface damage and crack growth kinetics during the incubation stage, Wear, Vol. 316, 2014
Shuji Hattori, Norihiro Mikami, Cavitation erosion resistance of stellite alloy weld overlays, Wear, Vol. 267, 2009
J.T.Chang, C.H.Yeh, J.L.He, K.C.Chen, Cavitation erosion and corrosion behavior of Ni-Al intermetallic coatings, Wear, Vol. 255, 2003
Bin Liu, Jun Cai, Xiulan Huai, Heat transfer with the growth and collapse of cavitation bubble between two parallel heated walls, International Journal of Heat and Mass Tranfer, Vol. 78, 2014
Matevz Dular, Bernd Bachert, Bernd Stoffel, Brane Sirok, Relationship between cavitation structures and cavitation damage, Wear, Vol. 257, 2004
ZHAO Wei-guo, ZHANG Ling-xin, NUMERICAL SIMULATION OF CAVITATION FLOW UNDER HIGH PRESSURE AND TEMPERATURE, Journal of Hydrodynamics, Vol. 23(3), 2011
Bu-Geun Paik, Kyung-Youl Kim, Ki-Sup Kim, Sunho Park, JaeKyung Heo, Byeong-Seok Yu, Influence of propeller wake sheet on rubber gap flow and gap cavitation, Ocean Engineering, Vol. 37, 2010
Bu-Geun Paik, Gun-Do Kim, Kyung-Youl Kim, Han-Shin Seol, Beom-Soo Hyun, Sang-Gab Lee, Young-Rae Jung, Investigation on the performance characteristics of the flexible propellers, Ocean Engineering, Vol. 73, 2013
Polymer impellers set to beat cavitation wear, WORLD PUMPS, October 2013
Gil-Hwan Choi, Bong-Jun Chang and Dae-Seung Cho, Cavitation Test at High Reynolds Number Using a Partial Propeller Blade Model, Journal of the Society of Naval Architects of Korea, Vol. 46, No. 6, 2009
C.P. Qin, Y.G. Zheng, R. Wei, Cavitation erosion behavior of nanocomposite Ti-Si-C-N and Ti/Ti-Si-C-N coatings deposited on 2Cr13 stainless steel using a Plasma Enhanced Magnetron Sputtering process, Surface & Coatings Technology, Vol. 201, 2010
Changmin Lee, Junkeun Oh and Shin Hyun Rhee, Two-dimensional Model Tests for Rubber Gap Cavitation and Suppression Devices, Journal of the Society of Naval Architects of Korea, Vol. 47, No. 2, 2010
David W. Hatchett, Gayani Kodippili, John M. Kinyanjui, Flocerfida Benincasa, Linda Sapochak, FTIR analysis of thermally processed PU foam, Polymer Degradation and Stability, Vol. 87, 2005
Jin Liu, Dezhu Ma, Zhen Li, FTIR studies on the compatibility of hard-soft segments for polyurethane-imide copolymers with different soft segments, European Polymer Journal, Vol. 38, 2002
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.