최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국유화학회지 = Journal of oil & applied science, v.31 no.4, 2014년, pp.694 - 702
The micron-sized ITO(indium tin oxide) particles were prepared by spray pyrolysis from aqueous precursor solutions for indium, and tin and organic additives solution. Organic additives solution with citric acid(CA) and ethylene glycol(EG) were added to aqueous precursor solution for Indium and Tin. ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
분무열분해법에 의해 생성된 분말의 성분 및 화학 구조를 확인하고자 XRD(Rigaku, DMAX2500PC)를 이용하여 측정하였다. 분석에는 Cu/Kα-1선을 이용하였으며, 2θ는 20°∼ 80°까지 분석하였다.
분무열분해법에 의해 생성된 분말의 표면의 모습, 입자 크기, 입자 모양 등의 형태적 특성을 분석하고자 SEM(JEOL-JSM 6390)분석기기로 가속전압은 20 kV, spot size는 30 nm, working distance는 10~15 ㎚, 필라멘트는 텅스텐을 사용하여 측정하였다.
분무열분해법에 의해 합성한 ITO 분말을 동전 모양의 tablet 형태로 만들어 면저항의 측정 및 단일 ITO target으로부터 증착시킨 ITO 필름의 면저항을 측정하기 위하여 4-point probe 전기저항 측정기(Mitsubishi, Loresta-GP MCP-T610)를 이용하여 측정하였다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
본 연구에서 ITO를 제조하는데 사용한 방법은 무엇인가? | 오늘날 LCD, PDP 등을 이용한 디스플레이 장비가 발전하면서 ITO관련 수요가 늘어나고 있다[7-12]. 본 연구에서는 간단한 공정으로 ITO를 제조하기 위해 분무열분해법(spray pyrolysis), 후소성 및 습식 볼밀링을 이용하였다. 또한 분무열분해 공정 중에 유기첨가제를 첨가하여 다공성과 중공성을 가지는 마이크론 크기의 입자를 얻은 후 후소성을 통하여 결정화하고 이를 지르코니아 볼을 이용하여 나노크기의 ITO로 전환하였다. | |
ITO를 사용하는 디스플레이는? | ITO는 indium tin oxide의 줄인 말로 투명하면서 전기가 통하는 투명 전도성 산화물[transparent conducting oxide(TCO)]중의 대표적인 물질이다. 모든 디스플레이어에서 필요한 것이 아니라 매트릭스 방식으로 구동되는 PDP(plasma display panel), LCD(liquid crystal display) 등의 얇고 편평한 디스플레이에 사용된다. 투명 전도 막은 지금까지 열반사막, 광전변환 소자 및 각종 FPD(flat panel display)의 투명 전극 등으로 사용 되어 왔다. | |
indium tin oxide이란? | ITO는 indium tin oxide의 줄인 말로 투명하면서 전기가 통하는 투명 전도성 산화물[transparent conducting oxide(TCO)]중의 대표적인 물질이다. 모든 디스플레이어에서 필요한 것이 아니라 매트릭스 방식으로 구동되는 PDP(plasma display panel), LCD(liquid crystal display) 등의 얇고 편평한 디스플레이에 사용된다. |
G. Buhler, D. Tholmann, and C. Feldmann, "One-Pot Synthesis of Highly Conductive Indium Tin Oxide Nanocrystals", Adv. Mater., 19, 2224 (2007).
H. S. Jang, D. H. Kim, H. R. Lee, and S. Y. Lee, "Field emission from cone-like single crystalline indium tin oxide nanorods", Mater. Lett., 59, 1526 (2005).
S. Kundu and P. K. Biswas, "Synthesis of nanostructured sol-gel ITO films at different temperatures and study of their absorption and photoluminescence properties", Opt. Mater., 31, 429 (2008).
R. A. Gilstrap, C. J. Capozzi, C. G. Carson, and R. A. Gerhardt, A. Y. Borisevich, C. J. Summers, "Synthesis of Nonagglomerated Indium Tin Oxide Nanoparticle Dispersions", Adv. Mater., 20, 4625 (2008).
S. Luo, K. Okada, S. Kohiki, F. Tsutsui, H. Shimooka, and F. Shoji, "Optical and electrical properties of indium tin oxide thin films sputter-deposited in working gas containing hydrogen without heat treatments", Mater. Lett., 63, 641 (2009).
L. L. Yang, X. D. He, F. He, and Y. Sun, "Small angle X-ray scattering studies on structural evolution during calcination of sol-gel ITO nano-powders", J. Alloys. Compd., 470, 317 (2009).
R. Balasundaraprabhu, E. V. Monakhov, N. Muthukumarasamy, O. Nilsen, and B. G. Svensson, "Effect of heat treatment on ITO film properties and ITO/p-Si interface", Mater. Chem. Phys., 114, 425 (2009).
M. K. Jeon and M. Kang, "Synthesis and characterization of indium-tin-oxide particles prepared using sol-gel and solvothermal methods and their conductivities after fixation on polyethyleneterephthalate films", Mater. Lett., 62, 676 (2008).
K. P. Kalyanikutty, G. Gundiah, C. Edem, A. Govindaraj, and C. N. R. Rao, "Doped and undoped ITO nanowires", Chem. Phys. Lett., 408, 389 (2005).
Q. Wan, M. Wei, Dan Zhi, J. L. MacManus-Driscoll, and M. G. Blamire, "Epitaxial Growth of Vertically Aligned and Branched Single-Crystalline Tin-Doped Indium Oxide Nanowire Arrays", Adv. Mater., 18, 234 (2006).
P. Nguyen, H. T. Ng, J. Kong, A. M. Cassell, R. Quinn, J. Li, J. Han, M. McNeil, and M. Meyyappan, "Epitaxial Directional Growth of Indium-Doped Tin Oxide Nanowire Arrays", Nano Lett. 3, 925 (2007).
Y. Q. Chen, J. Jiang, B. Wang, and J. G. Hou, "Synthesis of tin-doped indium oxide nanowires by self-catalytic VLS growth", J. Phys. D Appl. Phys., 37, 3319 (2004).
Sang Hern Kim, "분무열분해법에 의한 인듐 아연 주석 산화물(IZTO) 분말 제조 방법", 한국 특허 10-1362124 (2014)
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.