최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of welding and joining = 대한용접·접합학회지, v.32 no.6, 2014년, pp.41 - 46
이창민 (한양대학교 신소재공학부) , 박형권 (한양대학교 신소재공학부) , 이창희 (한양대학교 신소재공학부)
In this study, cracking susceptibility of laser cladding was investigated according to the processing parameters such as laser power, scan speed and feeding rate with blended powders of stellite#6 and technolase40s (WC+NiCr). The solidification microstructure of clad was composed of Co-based dendrit...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
레이저클래딩으로 적층시킬 코팅층의 재료는 무엇인가? | 코팅층의 재료는 Fig. 1에서 보는 바와 같이 스텔라이 트#6와 테크노라세40s 분말을 55:45 (wt%)의 비율로 사용하였다. 먼저 스텔라이트#6는 하드페이싱 (hardfacing) 에 주로 이용되는 합금으로써 Table 1에서와 같이 Co 를 기반으로 Cr과 C, W 등으로 이루어져 있으며, 이는 스텔라이트#6가 응고 과정 중 Cr, W 카바이드를 형성함으로써 내마모성을 향상시키기 위함이다. | |
레이저클래딩이란 무엇인가? | 레이저클래딩 (laser cladding)은 물질의 내마모성과 내식성 향상을 위해 보편적으로 사용하는 표면처리 기술로써, 자동차, 항공기 등의 엔진 또는 채광 산업, 기계 부품 보수 등에 많이 사용되고 있다1-3). 이러한 레이저클래딩 기술은 코팅층과 모재 사이의 접합력 (bonding strength)이 기존의 열 용사기술 (HVOF, plasma spray 등)에 비해 매우 우수하며, 국소면적에 정밀한 코팅이 가능하다는 장점을 가지고 있다. | |
레이저클래딩은 어디에 사용되는가? | 레이저클래딩 (laser cladding)은 물질의 내마모성과 내식성 향상을 위해 보편적으로 사용하는 표면처리 기술로써, 자동차, 항공기 등의 엔진 또는 채광 산업, 기계 부품 보수 등에 많이 사용되고 있다1-3). 이러한 레이저클래딩 기술은 코팅층과 모재 사이의 접합력 (bonding strength)이 기존의 열 용사기술 (HVOF, plasma spray 등)에 비해 매우 우수하며, 국소면적에 정밀한 코팅이 가능하다는 장점을 가지고 있다. |
J.M. Amado, M.J. Tobar, J.C. Alvarez, J. Lamas and A. Yanez : Laser Cladding of Tungsten Carbides (Spherotene) Hardfacing Alloys for the Mining and Mineral Industry, Applied Surface Science. 255 (2009), 5553-5556
G. Xu, M. Kutsuna, Z. Liu and L. Sun : Characteristic Behaviours of Clad Layer by a Multi-layer Laser Cladding with Powder Mixture of Stellite-6 and Tungsten Carbide, Surface and Coatings Technology. 201 (2006), 3385-3392
L. Shepeleva, B. Medres, W. D. Kaplan, M. Bamberger and A. Weisheit : Laser Cladding of Turbine Blades, Surface and Coatings Technology. 125 (2000), 45-48
C. Zhenda, L. L. Chew and Q. Ming : Laser Cladding of WC-Ni Composite, Journal of Materials Processing Technology. 62 (1996), 321-323
C. Cui, Z. Guo, Y. Liu, Q. Xie, Z. Wang, J. Hu and Y. Yao : Characteristics of Cobalt-based Alloy Coating on Tool Steel Prepared by Powder Feeding Laser Cladding, Optics & Laser Technology. 39 (2007), 1544-1550
J. D. Kim, M. J. Bae, and Y. Peng : Nd:YAG Laser Cladding of Inconel with Wire Feeding, Journal of KWS. 18-3 (2000), 83-88 (in Korean)
S. Sun, Y. Durandet and M. Brandt : Parametric Investigation of Pulsed Nd: YAG Laser Cladding of Stellite 6 on Stainless Steel, Surface and Coatings Technology. 194 (2005), 225-231
C. P. Paul, H. Alemohammad, E. Toyserkani, A. Khajepour and S. Corbin : Cladding of WC-12 Co on Low Carbon Steel Using a Pulsed Nd:YAG Laser, Materials Science and Engineering: A. 464 (2007), 170-177
K. Van Acker, D. Vanhoyweghen, R. Persoons, and J. Vangrunderbeek : Influence of tungsten carbide particle size and distribution on the wear resistance of laser clad WC/Ni coatings, Wear. 258 (2005), 194-202
M. Pilloz, J.M. Pelletier and A.B. Vannes : Residual Stresses Induced by Laser Coatings: Phenomenological Analysis and Predictions, Journal of Materials Science. 27 (1992), 1240-1244
F. Wang, H. Mao, D. Zhang and X. Zhao : The Crack Control during Laser Cladding by Adding the Stainless Steel Net in the Coating, Applied Surface Science. 255 (2009), 8846-8854
J. Y. Chen, K. Conlon, L. Xue and R. Rogge : Experimental Study of Residual Stresses in Laser Clad AISI P20 Tool Steel on Pre-hardened Wrought P20 Substrate, Materials Science and Engineering: A. 527 (2010), 7265-7273
F. Wang, H. Mao, D. Zhang, X. Zhao and Y. Shen : Online Study of Cracks during Laser Cladding Process Based on Acoustic Emission Technique and Finite Element Analysis, Applied Surface Science. 255 (2008), 3267-3275
S. W. Huang, D. Nolan and M. Brandt : Pre-Placed WC/Ni Clad Layers Produced with a Pulsed Nd: YAG Laser via Optical Fibres, Surface and Coatings Technology. 165 (2003), 26-34
S. Zhou, X. Zeng, Q. Hu and Y. Huang : Analysis of Crack Behavior for Ni-Based WC Composite Coatings by Laser Cladding and Crack-Free Realization, Applied Surface Science. 255 (2008), 1646-1653
J. Xu, X. Zhang, F. Xuan, F. Tian, Z. Wang and S. Tu : Tensile Properties and Fracture Behavior of Laser Cladded WC/Ni Composite Coatings with Different Contents of WC Particle Studied by In- Situ Tensile Testing, Materials Science and Engineering: A. 560 (2013), 744-751
V. T. Golovchan, V. P. Bondarenko and N. V. Litoshenko : Strength of Polycrystalline Tungsten Monocarbide under Tension, Strength of Materials. 35 (2003), 387-394
※ AI-Helper는 부적절한 답변을 할 수 있습니다.