최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.38 no.4, 2014년, pp.437 - 442
진병규 ((주) 엠앤디) , 박기범 ((주) 엠앤디) , 채장범 (아주대학교 기계공학부)
The equipment or with a constant torque and a variable stress due to axial vibration such as the turbine-generator system in nuclear power plant show the fatigue fracture behavior. Thus this study whoul aim to measure the torsional stress and analyze the fatigue fracture behavior. To achieve this, w...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
응력-수명 평가 시 고려하지 않는 변수는 무엇인가? | 응력-수명 평가는 재료의 탄성 변형과 소성변형에 대해 고려하지 않고 응력이 개별적으로 파손에 미치는 영향을 평가한다. 이에 반해 식 (3)의 Basquin-Coffin-Manson 식은 탄성변형과 함께 소성변형에 의한 수명 감소를 고려한다. | |
피로 수명 평가 방법을 이용하여 비틀림 응력이 피로수명에 미치는 영향을 평가한 결과는 무엇인가? | (2) 세 가지 피로 수명 평가 방법으로 평가한결과 평가 방법과 무관하게 부하의 크기가 증가하면서 수명이 감소하였다. 무부하에 비해 5 kV 부하가 인가되는 경우 약 10배의 피로수명 감소가 발생함을 확인하였다. | |
원자력 발전의 터빈 발전기에서 발생한 응력 변화로 인하여 어떤 문제가 발생하는가? | 원자력 발전에 사용되는 터빈-발전기는 일정한 토크와 함께 지속적으로 축 진동에 의한 응력 변화가 발생한다. 특히 운전 조건의 변화 및 단락 등의 갑작스러운 변화에 의해 터빈 축에 과다한 비틀림 응력이 인가되고 이러한 과다 비틀림 응력에 의해 터빈 축에 손상이 발생하며, 지속으로 손상이 발생하는 경우 손상이 누적되어 파괴가 발생하게 된다. (1) 하지만 이러한 비틀림 응력은 매우 일시적으로 산발적이며, 이로 인한 손상 역시 원자력 발전소 계획 예방 정비(Over Holl) 기간에 확인하는데 어려움이 있다. |
Grigsby, L. L., 2007, Power System Stability and Control, CRC Press, pp. 16-18-16-19.
Placek R. J., Williams R. A., Adams S. L. and Klufas, O., 1984, "Determination of Torsional Fatigue Life of Large Turbine Generator Shafts," EPRI Report EL-3083, USA.
Rosario D. A. and Khalid T., 2005, "Generator Shaft Keyway Cracking Failure Investigation," Proc. 9th EPRI Stream Turbine-Generator Workshop, Denver, Colorado, pp. 1-10.
Raju I. S. and Newman J. C., 1984, "Stress-Intensity Factors for Circumferential Surface Cracks in Pipes and Rods Under Tension and Bending Loads," Fracture Mechanics Vol.17, pp. 1-36.
Nakada M., Noda J. and Miyano Y., 2007, "Fatigue Life Prediction of CFRP Laminates Under Variable Stress Amplitude and Frequency," Key Engineering Material, Vol. 334-335, pp. 445-448.
http://www.steel0.com/JIS_S45C.htm.
Kim K. S., Chen X., Han C. and Lee H. W., 2002, "Estimation Methods for Fatigue Properties of Steels Under Axial and Torsional Loading," International Journal of Fatigue, Vol. 24, pp. 783-793.
Bannantine J. A., Comer J. J. and Handrock J. L., 1989, Fundamentals of Metal Fatigue Analysis, Prentice Hall, pp. 189-192.
Tsai J. I., 2008, "Long-Term Fatigue Life Expenditure of Turbine Shafts Owing to Noncharacteristic Harmonics Produced by Slip Energy Recovery Induction Motor Drives," Journal of Solid Mechanics and Materials Engineering, Vol. 2, No. 8, pp. 1146-1160.
McKelvey S. A., Lee Y. L. and Barkey M. E, 2012, "Stress-Based Uniaxial Fatigue Analysis Using Methods Described in FKM-Guideline," Journal of Failure Analysis and Prevention, Vol. 12, pp. 445-484.
Grigsby L. L., 2007, Power System Stability and Control, CRC Press, pp. 16-18-16-19.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.