최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국건축시공학회지 = Journal of the Korea Institute of Building Construction, v.14 no.2, 2014년, pp.143 - 149
안재홍 (Fire Research Center, Korea Institute of Construction Technology(KICT)) , 여인환 (Fire Research Center, Korea Institute of Construction Technology(KICT)) , 김경우 (Building Research Department, Korea Institute of Construction Technology(KICT))
Recently, the structure system for apartment buildings in Korea has been changing from wall to post-beam structure. This study examines the fire resistance and sound insulation of light-weight dried wall, a component of post-beam structure. For the fire resistance and sound insulation in Korea, the ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
국내 공동주택는 일반적으로 어떤 구조로 시공되어 왔는가? | 국내 공동주택은 일반적으로 내력벽이 하중을 부담하는 벽식 구조로 설계 및 시공되어 왔으며, 주거문제 해결을 위한 주택 대량공급이라는 시대적 요구에 시공효율성이 높은 벽식 구조의 장점이 맞물리면서 공동주택 건설시 일반화된공법으로 적용되어 왔다. 하지만 벽식 구조는 구조체인 벽체를 제거하거나 변경할 수 없어 주거문화 및 가족 구조의 변화 등 생활양식 변화를 적극적으로 수용하지 못하고 조기 재건축으로 인한 건설 폐기물 발생과 에너지 낭비 등 사회적 문제로 제기되고 있다. | |
공동주택의 화재안전성을 확보하기 위하여 벽체의 내화 성능뿐만 아니라 벽체 마감재료의 성능도 중요한 이유는? | 공동주택의 화재안전성을 확보하기 위하여 벽체의 내화 성능뿐만 아니라 벽체 마감재료의 성능 또한 중요하다. 이는 내화성능의 경우 플래시오버(flashover) 이후의 구조 부재의 붕괴여부를 판단하는 지표가 되나 마감재료의 경우 초기 발화 및 화재의 성장과정에서 중요한 요인으로 작용할 수 있기 때문이다. 이러한 이유로, 국내를 포함하여 각국에서의 공동주택 벽체 마감재료에 대한 성능기준이 어떻게 운용되고 있는지 고찰하였다. | |
벽식 구조의 단점은? | 국내 공동주택은 일반적으로 내력벽이 하중을 부담하는 벽식 구조로 설계 및 시공되어 왔으며, 주거문제 해결을 위한 주택 대량공급이라는 시대적 요구에 시공효율성이 높은 벽식 구조의 장점이 맞물리면서 공동주택 건설시 일반화된공법으로 적용되어 왔다. 하지만 벽식 구조는 구조체인 벽체를 제거하거나 변경할 수 없어 주거문화 및 가족 구조의 변화 등 생활양식 변화를 적극적으로 수용하지 못하고 조기 재건축으로 인한 건설 폐기물 발생과 에너지 낭비 등 사회적 문제로 제기되고 있다. 이에 사회적으로 100년 이상 주거가 가능한 장수명 주택 등 공동주택도 기존의 벽식구조에 기둥식 구조로 변화가 필요한 시점에 도달된 것으로 사료된다[1]. |
Lee HJ, Kim HG, Research of lightweight wall system for long-life housing. Seoul(Korea);SH Corporation Urban research; 2010. 96 p. Korea.
Regulation on Building Evacuation & Fire-Prevention Use Structure Standard of 2013; 2013. Korea.
International CODE COUNCIL, 2012 International Building Code, IL U.S.A: International CODE COUNCIL, INC.;2011. Section 310; 49-50 p, Section 803.1.1; 197 p.
Building Standard Act of 2013; 2013. Japan.
M.J.Billington, K.T.Bright, J.R.waters, The Building Regulations, 13th ed. Oxford:Blackwell Publishing; 2010. Chapter 7.18.6, 7.93-7.94 p, Chapter 7.21, 7.104-7.121 p.
Enforcement Ordinance of Construction Act of 2013; 2013. Korea.
Provision of Housing construction standards of 2013; 2013. Korea.
KS F 2808: Laboratory measurements of airborne sound insulation of building elements; 2011. Korea.
KS F 2862: Rating of airborne sound insulation in buildings and of building elements; 2002. Korea.
Architectural Institute of Japan, Design guide of Sound insulation performance standard in buildings. Tokyo: AIJ; 1997. 6p, 28-29p. Japan.
Yoo YH, Development of fire spread protection and escape safety design technique according to standard fire model. Goyang(Korea):KICT; 2008. 16 p. Report No. :KICT2008-116. Korea.
KS F 2257-1:Methods of fire resistance test for elements of building construction-General requirements; 2005. Korea.
KS F 2257-8:Methods of fire resistance test for elements of building construction-Specific requirements for non-load bearing vertical separation elements; 2004. Korea.
ASTM E 84:Standard test method for surface burning characteristics of building materials; 2013. USA.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.