최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국산학기술학회논문지 = Journal of the Korea Academia-Industrial cooperation Society, v.15 no.4, 2014년, pp.2469 - 2475
숫러타 (관동대학교 토목공학과) , 유승운 (관동대학교 토목공학과)
In 1990s, with the increase of domestic building renovation but also increase the amount of anchor. The 45-degree cone failure theory has been used in concrete anchor bolts design, but the CCD (concrete capacity design) method was adopted as a new design method since 2000. However, the method has so...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
앵커의 종류는? | 부착물에 가해지는 하중은 마찰력,기계적 잠금장치,부착 또는 이들의 복합요소에 의해 앵커로 전달되며 다시 앵커를 통해 콘크리트 구조물로 전달된다.앵커는 선설치 앵커(cast-in-placeanchor)와 후설치 앵커(post-installed anchor)로 크게 두 가지로 분류할 수 있다. | |
콘크리트 앵커가 사용되는 곳은? | 콘크리트 앵커는 기존 콘크리트 구조물을 보강하거나, 증축하는 경우 또는 중량물 혹은 철골구조물 등을 고정시키는데,건축구조물의 철골기둥,터빈 기기 등을 콘크리트 구조물에 부착시키기 위해 널리 쓰인다.부착물에 가해지는 하중은 마찰력,기계적 잠금장치,부착 또는 이들의 복합요소에 의해 앵커로 전달되며 다시 앵커를 통해 콘크리트 구조물로 전달된다. | |
콘크리트 앵커에서 하중을 지지하는 과정은? | 콘크리트 앵커는 기존 콘크리트 구조물을 보강하거나, 증축하는 경우 또는 중량물 혹은 철골구조물 등을 고정시키는데,건축구조물의 철골기둥,터빈 기기 등을 콘크리트 구조물에 부착시키기 위해 널리 쓰인다.부착물에 가해지는 하중은 마찰력,기계적 잠금장치,부착 또는 이들의 복합요소에 의해 앵커로 전달되며 다시 앵커를 통해 콘크리트 구조물로 전달된다.앵커는 선설치 앵커(cast-in-placeanchor)와 후설치 앵커(post-installed anchor)로 크게 두 가지로 분류할 수 있다. |
F. Werner, E. Rolf, E. B. John, "Concrete Capacity Design(CCD) Approach for Fastening to Concrete," ACI Structural Journal. vol. 92, No. 1, pp.73-94, January, 1995.
Korea Concrete Institute, Design Method for Concrete Anchors and Examples, Korea, 2010.
S. Y. Kim, and K. S. Kim, "Shear Strength of Anchors installed in Uncracked and Unreinforced Concrete", Conference of Architectural Institute of Korea, vol. 19, No. 9, pp.69-78, September, 2003.
Y. M. Park, M. H. Jeon, M. K. Choi, C. H. Kim, "A Study on the Concrete Breakout Capacity Evaluation of Medium-to-Large size CIP Anchor Bolts under Tension Loading", Journal of Korean Society of Steel Construction, vol. 23, No. 4, pp.493-501, August, 2011.
S. W. Yoo, S. H. Jung, K. S. Kwak, J. H. Lee, "Experimental Study on Pullout Characteristics of Adhesive Anchor", Journal of the Korean Society of Civil Engineering, vol. 26, No. 3, pp. 555-563, May, 2006.
K. M. Lee, C. Y. Lee, S. H. Jung, S. W. Choi, "Tensile and Shear Test Method for Post-installed Mechanical Anchors Embedded in Concrete", Journal of the Korea Concrete Institute, vol. 21, No. 1, pp.97-98, 2009.
J. B. Jang, and Y. P. Suh, "An Evaluation of Tensile Design Criteria of Cast-In-Place Anchor by Numerical Analysis"Journal of Computational Structural Engineering Institute of Korea, vol. 18, No. 3, pp.303-309, September, 2005.
D. U. Choi, K. H. Kim, "State-of-the-Art on Anchoring to Concrete, Mechanical Anchorage and Splices of Reinforcement", Magazine of the Korea Concrete Institute, vol. 17, No. 5, pp. 16-20, September, 2005.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.