탄소섬유강화플라스틱(CFRP)의 적층 배향각에 따른 드릴링 가공 특성 고찰 Investigation Into the Drilling Characteristics of Carbon Fiber Reinforced Plastic (CFRP) with Variation of the Stacking Sequence Angle원문보기
Due to recent industrial growth and development, there has been a high demand for light and highly durable materials. Therefore, a variety of new materials has been developed. These new materials include carbon fiber reinforced plastic (CFRP or CRP), which is a wear-, fatigue-, heat-, and corrosion-...
Due to recent industrial growth and development, there has been a high demand for light and highly durable materials. Therefore, a variety of new materials has been developed. These new materials include carbon fiber reinforced plastic (CFRP or CRP), which is a wear-, fatigue-, heat-, and corrosion-resistant material. Because of its advantageous properties, CFRP is widely used in diverse fields including sporting goods, electronic parts, and medical supplies, as well as aerospace, automobile, and ship materials. However, this new material has several problems, such as delamination around the inlet and outlet holes at drilling, fiber separation, and tearing on the drilled surface. Moreover, drill chips having a fine particulate shape are harmful to the work environment and engineers' health. In fact, they deeply penetrate into machine tools, causing the reduction of lifespan and performance degradation. In this study, CFRP woven and unidirectional prepregs were formed at $45^{\circ}$ and $90^{\circ}$, respectively, in terms of orientation angle. Using a high-speed steel drill and a TiAIN-coated drill, the two materials were tested in three categories: cutting force with respect to RPM and feed speed; shape changes around the input and outlet holes; and the shape of drill chips.
Due to recent industrial growth and development, there has been a high demand for light and highly durable materials. Therefore, a variety of new materials has been developed. These new materials include carbon fiber reinforced plastic (CFRP or CRP), which is a wear-, fatigue-, heat-, and corrosion-resistant material. Because of its advantageous properties, CFRP is widely used in diverse fields including sporting goods, electronic parts, and medical supplies, as well as aerospace, automobile, and ship materials. However, this new material has several problems, such as delamination around the inlet and outlet holes at drilling, fiber separation, and tearing on the drilled surface. Moreover, drill chips having a fine particulate shape are harmful to the work environment and engineers' health. In fact, they deeply penetrate into machine tools, causing the reduction of lifespan and performance degradation. In this study, CFRP woven and unidirectional prepregs were formed at $45^{\circ}$ and $90^{\circ}$, respectively, in terms of orientation angle. Using a high-speed steel drill and a TiAIN-coated drill, the two materials were tested in three categories: cutting force with respect to RPM and feed speed; shape changes around the input and outlet holes; and the shape of drill chips.
Schwartz, M. M., 1984, Composite Materials Handbook, McGraw-Hill, New York.
Mallick, P. K., Dekker, M., 1988, Fiber-Reinforced Composite: Materials, Manufacturing, and Design, CRC Press, United States.
Wang, D. H., Ramulu, M., Arola, D., 1995, Orthogonal Cutting Mechanism of Graphite/Epoxy Composite, Part I: Uni-Directional Laminate, Int. J. Mach. Tools. Manufacture 35:12 1623-1638.
Wang, D. H., Ramulu, M., Arola, D., 1995, Orthogonal Cutting Mechanism of Graphite/Epoxy Composite, Part I: Multi-Directional Laminate, Int. J. Mach. Tools. Manufacture 35:12 1639-1648.
Chen, W. C., 1997, Some Experiment Investigation in the Drilling of Carbon Fiber-reinforced Plastic Composite Laminates, International Journal of Machine Tools & Manufacture 37:8 639-650.
Jung, S. T., 2002, A Study on the Drilling Characteristics of CFRP Composites with Respect to Stacking Sequence, Graduate School, Chosun University, Republic of Korea.
Park, J. N., 2002, A Study on the cutting characteristics of the fiber reinforced plastics by drill tools, Graduate School, Chosun University, Republic of Korea.
Sung, I. S., 2005, A Study on the cutting characteristics of the fiber reinforced plastics by high speed drilling process, Graduate School, Kookmin University, Republic of Korea.
Ruegg, C., Habermeir, J., 1980, Composite Propeller Shaft Design and Optimization, Advance in Composite Material, Processing of ICCM3 2 1740-1755.
AI-Helper
※ AI-Helper는 부적절한 답변을 할 수 있습니다.