최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국소음진동공학회논문집 = Transactions of the Korean society for noise and vibration engineering, v.24 no.7, 2014년, pp.555 - 561
안병현 (Department of Energy and Mechanical Engineering at Gyeongsang National University in Korea) , 김용휘 (Department of Energy and Mechanical Engineering at Gyeongsang National University in Korea) , 이종명 (Department of Energy and Mechanical Engineering at Gyeongsang National University in Korea) , 이정훈 (Department of Energy and Mechanical Engineering at Gyeongsang National University in Korea) , 최병근 (Department of Energy and Mechanical Engineering at Gyeongsang National University in Korea)
Acoustic Emission technique is widely applied to develop the early fault detection system, and the problem about a signal processing method for AE signal is mainly focused on. In the signal processing method, envelope analysis is a useful method to evaluate the bearing problems and wavelet transform...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
예지 정비의 목표는 무엇인가? | 하지만 정비 기술은 앞으로 예지정비(predictive maintenance)(1)를 목표로 연구가 진행되고 있으며, 세계 각국에서 여러 가지 형태로 발전되고 있는 상황이다. 예지 정비는 설비의 여러 데이터를 종합하여 설비의 현 상태, 앞으로의 정비 계획, 잔류 수명등을 예측하고, 사고의 사전 예방을 목표로 하기 때문에 기초 데이터는 매우 중요한 역할을 하게 된다. 그 데이터는 조기 진단 시스템에서 핵심이 되는 기술이 된다. | |
조기 진단 시스템에서 조기 결함 검출이 반드시 필요한 이유는? | 그 데이터는 조기 진단 시스템에서 핵심이 되는 기술이 된다. 결함을 조기에 발견함으로써 설비의 현상태뿐만 아니라, 잔류 수명, 사고 발생 시점 등을 예측할 수 있기 때문에 조기 결함 검출은 반드시 필요한 요소이다(2). 조기 결함 검출을 위한 선행 연구들은 기존의 진동 센서가 검지할 수 없는 신호를 대상으로 하기 때문에 진동 센서와 유사한 형태로 신호를 검출하지만 감도가 뛰어나고 고주파(초음파 이상)의 신호를 검지할 수 있는 음향방출(acoustic emission, AE) 센서로 조기 결함을 진단하는 연구들이 발표되었다(3~8). | |
음향방출(acoustic emission, AE) 센서 사용한 조기 결함의 한계는? | 조기 결함 검출을 위한 선행 연구들은 기존의 진동 센서가 검지할 수 없는 신호를 대상으로 하기 때문에 진동 센서와 유사한 형태로 신호를 검출하지만 감도가 뛰어나고 고주파(초음파 이상)의 신호를 검지할 수 있는 음향방출(acoustic emission, AE) 센서로 조기 결함을 진단하는 연구들이 발표되었다(3~8). 하지만 AE 센서에서 취득된 신호는 많은 잡음(background noise)을 포함하고 있으며, 더불어 초음파 이상의 주파수 대역을 가지고 있기 때문에, 원신호를 이용하여 결함 분석을 위한 정보를 얻기가 쉽지 않다. 따라서 음향방출 센서가 적용된 결함 검출 연구에서는 많은 신호처리 기법들이 적용되었으며, 그 중 포락처리(envelope analysis)와 웨이블릿 변환(wavelet transform) 등이 유용한것으로 나타나고 있다. |
Mobley, R. K., 2002, An Introduction to Predictive Maintenance(2nd Edition), Elsevier Science (USA).
Sullivan, G. P., Pugh, R., Melendez, A. P. and Hunt, W. D., 2010, Oeprations & Maintenance-Best Practices : Aguide to Achieving Operational Efficiency (Rel. 3.0), U.S. Department of Energy.
Robert, B. and Antoni, J., 2011, Rolling Element Bearing Diagnostics, Mechanical System and Signal Processing, Vol. 25, No. 2, pp. 485-520.
Baydar, N. and Ball, A., 2003, Detection of Gear Failures via Vibration and Acoustic Signals Using Wavelet Transform, Mechanical System and Signal Processing, Vol. 17, No. 4, pp. 787-804.
Jeong, H. E., Gu, D. S., Kim, H. J., Andy, T., Kim, Y. H. and Choi, B. K., 2007, The Application of AE Transducer for the Bearing Condition Monitoring of Low-speed Machine, KSNVE07S-09-03.
Kim, H. J., Gu, D. S., Jeong, H. E. and Andy, T., Kim, E. R. and Choi, B. K., 2007, The Comparison of AE and Acceleration Transducer for the Early Detection on the Low-speed Bearing, Proceedings of the KSNVE Annual Autumn Conference, KSNVE07S-09-04.
Loutas, T. H., Sotiriades, G., Kalaitzoglou, I. and Kostopouls, V., 2009, Condition Monitoring of a Single-stage Gearbox with Artificially Induced Gear Cracks Utilizing On-line Vibration and Acoustic Emission Measurements, Applied Acoustics, Vol. 70, pp. 1148-1159.
Entezami, M., Hillmansen, S. and Roberts, C., 2010, Wind Turbine Condition Monitoring System, University of Birmingham.
Wang, D., Miao, Q. and Kang, R., 2009, Robust Health Evaluation of Gearbox Subject to Tooth Failure with Wavelet Decomposition, Journal of Sound and Vibration, Vol. 324, pp. 1141-1157.
Lei, Y., He, Z., Zi, Y. and Hu, Q., 2007, Fault Diagnosis of Rotating Machinery based on Multiple ANFIS Combination with GAs, Mechanical Systems and Signal Processing 21, pp. 2280-2294.
Smola, A. J. and Scholkopf, B., 2004, A Tutorial on Support Vector Regression, Statistics and Computing 14, pp. 199-222.
Deriche, M., 2005, Bearing Fault Diagnosis Using Wavelet Analysis, Computers, Communications, & Signal Processing with Special Track on Biomedical Engineering, CCSP 2005, 1st International Conference on, pp. 197-201.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.