최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국산학기술학회논문지 = Journal of the Korea Academia-Industrial cooperation Society, v.15 no.7, 2014년, pp.4072 - 4080
이민 (부경대학교 대학원 기계공학과) , 김태완 (부경대학교 기계공학과)
The Peltier Module has been used to dissipate the heat from electronic devices and electronic components. In this module, a heat sink is used to release the operating heat into the air outside. This study addressed the heat transfer characteristics for a heat sink with an inner tunnel. Under forced ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
전자 장비에서 발생하는 열을 냉각하기 위해 무엇이 사용되는가? | 전자 장비에서 발생하는 열은 장비의 성능을 저하시키거나 고장을 일으킨다. 전자장비에서 발생하는 열을 냉각하기 위해 P-type와 N-type 반도체 (semiconductors)로 구성된 Thermoelectric devices(TE)장치의 하나인 열전냉각기(thermoelectric coolers)를 사용한다[3-5]. 펠티에 효과(Peltier effect)는 전기를 열에너지로 바꾸고[6-8], 전자 장비에서 발생하는 열을 냉각하기 위한 방법으로 사용된다. | |
열전발전기란? | 열전발전기(Thermoelectric generators)는 반도체 재료에 의해서 열을 전기로 바꾸는 힘의 원천(Power sources)이고, 이러한 원리를 제벡효과(Seebeck effect)라 한다[1]. 차량 교류전원에 힘을 올리기 위해 차량배기관에 열전발전기를 사용하고[2], 그리고, 펌프(Pumps), 팬(Fans), 텔레비전(TVs)등에도 많이 사용되고 있다. | |
펠티에 소자는 어디에 사용되는가? | 펠티에 소자는 전자부품이나 장비에서 발생하는 열을 냉각하기 위한 방법으로 많이 사용되고, 히트싱크는 이러한 열을 외부로 방출하기 위한 방법으로 많이 사용되고 있다. 본 연구에서는 내부터널의 형상을 가지는 히트싱크에 대한 냉각 및 히팅성능을 자연대류와 강제대류 상태에서 열전달 특성에 대하여 고찰하였다. |
Champier D, Bedecarrats JP, Rivaletto M, Strub F, "Thermoelectric power generation from biomass cook stoves", Energy, Vol. 35, pp. 935-942, 2010. DOI: http://dx.doi.org/10.1016/j.energy.2009.07.015
E.F. Thacher, B.T. Helenbrook, M.A. Karri, C.J.Richter, "Testing an automobile thermoelectric exhaust based thermoelectric generator in a light truck", Proc. IMechE. D: J. Automob. Eng. Vol. 221, pp. 95-107, 2007.
Pan Y, Lin B, Chen J., "Performance analysis and parametric optimal design of an irreversible multi-couple thermoelectric refrigerator under various operating conditions", Appl. Energy, Vol. 84, pp. 882-892, 2007. DOI: http://dx.doi.org/10.1016/j.apenergy.2007.02.008
Gurevich YG, Logvinov GN, "Physics of thermoelectric cooling", Semicond Sci Technol, Vol. 20, pp. 57-64, 2005. DOI: http://dx.doi.org/10.1088/0268-1242/20/12/R01
Min Chen, Lasse A. Rosendahl, Thomas Condra, "A three-dimensional numerical model of thermoelectric generators in fluid power systems", International Journal of Heat and Mass Transfer, Vol. 54, pp. 345-355, 2011. DOI: http://dx.doi.org/10.1016/j.ijheatmasstransfer.2010.08.024
Wei-Hsin Chen, Chen-Yeh Liao, Chen-I Hung, "A numerical study on the performance of miniature thermoelectric cooler affected by Thomson effect", Applied Energy, Vol. 89, pp. 464-473, 2012. DOI: http://dx.doi.org/10.1016/j.apenergy.2011.08.022
Lee KH, Kim OJ, "Analysis on the performance of the thermoelectric microcooler", Int J Heat Mass Transfer, Vol. 50, pp. 1982-1992, 2007. DOI: http://dx.doi.org/10.1016/j.ijheatmasstransfer.2006.09.037
Luo J, Chen L, Sun F, Wu C, "Optimum allocation of heat transfer surface area for cooling load and COP optimization of a thermoelectric refrigerator", Energy Convers Manage, Vol. 44, (2003) pp. 3197-3206, 2003. DOI: http://dx.doi.org/10.1016/S0196-8904(03)00107-9
Lee DR, "Investigation of Optimal Cooling Performance Using Peltier Module and Heat Sink", Journal of the Korea society for power system engineering, Vol. 10, No. 4, pp. 65-70
Seung-Hwan Yu, Kwan-Soo Lee, Se-Jin Yook, "Natural convection around a radial heat sink", International Journal of Heat and Mass Transfer, Vol. 53, pp. 2935-2938, 2010. DOI: http://dx.doi.org/10.1016/j.ijheatmasstransfer.2010.02.032
R. Arularasan & R. Velraj, "Modeling and simulation of a parallel plate heat sink using computational fluid dynamics", Int J Adv Manuf Technol, Vol. 51, pp. 415-419, 2010. DOI: http://dx.doi.org/10.1007/s00170-008-1867-9
Bum-Sik Seo, Ki-Joung Lee, Jong-Kyung Yang, Young Seek Cho, and Dae-Hee Park, "Development and Characterization of Optimum Heat Sink for 30 W Chip on Board LED Down-Light", Transactions on Electrical and Electronic Materlals, Vol. 13, No. 6, pp. 292-296, 2012. DOI: http://dx.doi.org/10.4313/TEEM.2012.13.6.292
Yue-Tzu Yang, Huan-Sen Peng, "Numerical study of pin-fin heat sink with un-uniform fin height design", International Journal of Heat and Mass Transfer, Vol. 51, pp. 4788-4796, 2008. DOI: http://dx.doi.org/10.1016/j.ijheatmasstransfer.2008.02.017
Mehdi Mehrtash, Ilker Tari, "A correlation for natural convection heat transfer from inclined plate-finned heat sinks", Applied Thermal Engineering, Vol. 51, pp. 1067-1075, 2013. DOI: http://dx.doi.org/10.1016/j.applthermaleng.2012.10.043
Ilker Tari, Mehdi Mehrtash, "Natural convection heat transfer from inclined plate-fin heat sinks", International Journal of Heat and Mass Transfer, Vol. 56, pp. 574-593, 2013. DOI: http://dx.doi.org/10.1016/j.ijheatmasstransfer.2012.08.050
P. Teertstra, M.M. Yovanovich, J. R. Culham, "Analytical forced convection modeling plate fin heat sinks", J. Electronics Manufacturing, Vol. 10, No. 4, pp. 253-261, 2000. DOI: http://dx.doi.org/10.1142/S0960313100000320
C.T. Chen, H.I. Chen, "Multi-objective optimization design of plate-fin heat sinks using a direction-based genetic algorithm", Journal of the Taiwan Institute of Chemical Engineers, Vol. 44, pp. 257-265, 2013. DOI: http://dx.doi.org/10.1016/j.jtice.2012.11.012
K.T. Chiang, C.C. Chou, N.M. Liu, "Application of response surface methodology in describing the thermal performances of pin-fin heat sinks", International Journal of Thermal Sciences, Vol. 48, pp. 1196-1205, 2009. DOI: http://dx.doi.org/10.1016/j.ijthermalsci.2008.10.009
S.F. Hosseinizadeh, F.L. Tan , S.M. Moosania, "Experimental and numerical studies on performance of PCM-based heat sink with different configurations of internal fin", Applied Thermal Engineering, Vol. 31, pp. 3827-3838, 2011. DOI: http://dx.doi.org/10.1016/j.applthermaleng.2011.07.031
Y.A. Cengel, "Heat Transfer A Practical Approach 2nd edition", McGraw-Hill, Boston, 2003.
B.S. Seo, K. J. Lee, J.K. Yang, Y. S. Cho, D.H. Park, "Development and characterization of optimum heat sink for 30W chip on board LED down-light", Transactions on electrical and electronic materials, Vol. 13, No. 6 pp. 292-296, 2012.
Huang, B. J. and Chin, C. J. and Duang, C. L., "A design method of thermoelectric cooler", Int. J. of Refrigeration, Vol. 16, No. 1, pp. 208-218, 2000. DOI: http://dx.doi.org/10.1016/S0140-7007(99)00046-8
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.