최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기펄프 종이기술 = Journal of Korea TAPPI, v.46 no.4, 2014년, pp.11 - 20
신현식 (한국조폐공사) , 이진호 ((주) 케미라) , 김덕기 (한국조폐공사) , 박종문 (충북대학교 농업생명환경대학 임산공학과)
The objective of this study was to investigate the beating properties of two types of cotton pulps such as "cotton lint mixed pulp" and "cotton linter pulp". In order to improve refining characteristics, the effects of carboxymethyl-cellulose (CMC) pre-treatment, mixing ratio changes of cotton lint ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
린터섬유에 원면을 혼합하여 면 펄프를 제조한 이유는 무엇인가? | 본 연구에서는 국내 K사에서 사용하는 면 린터섬유에 원면이 혼합되어 제조된 면 펄프와 순수 면 린터로만 제조된 면 펄프 2 종을 사용하였다. 린터섬유에 원면을 혼합하여 면 펄프를 제조한 이유는 단속식 방식에 따른 펄프화 과정에서 섬유가 과도하게 손상되며 섬유의 유동성이 저하되는 특성이 나타나기 때문이다. 따라서 섬유의 유동특성을 강화시키기 위해 린터섬유에 일정 수준의 원면을 혼합하여 면 펄프를 제조하였다. | |
순수 린터섬유로 제조한 면 펄프의 단점은 무엇인가? | 그러나 제지공정에서 생산성 향상 및 원가절감, 품질 안정성 확보를 위해 면 펄프의 고해적성을 적합하게 유지해야 한다. 대체 적용할 수 있는 순수 린터섬유로 제조한 면 펄프는 기존 펄프에 비해 고해적성이 떨어지며 섬유변형이 어렵고 초지적성이 나빠지는 특성이 있다. 순수 린터 면섬유 펄프는 섬유조성과 원산지, 펄프화 방식이 근본적으로 달라 기존의 고해 메커니즘과 큰 차이가 있다. | |
고해방법의 전처리에 사용하는 약품은 무엇인가? | 고해특성을 향상시키기 위해 섬유에 화학약품을 이용하여 전 처리하는 고해방법이 널리 이용되고 있다.1) 전처리에 사용하는 약품으로는 carboxymethyl cellulose (CMC), polyethylene oxide(PEO), cationic polyacryl amide(CPAM), NaOH, 효소 등이 있다. 특히 낮은 분자량의 CMC로 전처리 후 고해를 실시할 경우 CMC가 섬유표면에 수용액상의 필름상태로 성형이 되고 표면에 매끄럽게 윤활작용을 하여 섬유팽윤과 유연성을 촉진시키는 원리로 알려져 있다. |
Clark, J. d'A., Pulp Technology and Treatment for Paper. 2nd Ed., Miller Freeman Publication Inc., San Francisco, pp. 345-346 (1985).
Huang, Z. H., He, B. H., Zhao, G. L., and Qian, L. Y., Effect of CMC addition during beating pulp of bamboo on its fiber and paper properties, China Pulp Paper 26(2):1-4 (2007).
Rakkolain, M., Kontturi, E., Isogai, A., Enomae, T., Blomstedt, M., and Vuorinen, T., Carboxymethyl cellulose treatment as a method to inhibit vessel picking tendency in printing of eucalyptus pulp sheet, Industrial & Engineering Chemistry Research 48(4): 1887-1892 (2009).
Seo, Y. B., Lee, M. H., Ha, I. H, and Cho, W. Y, Effect of papermaking additives on fiber mechanical pretreatment, Journal of Korea TAPPI 35(4):1-7 (2003).
Cheng, F., Li, Y., and Chen, D., Energy consumption and morphological development of eucalyptus alkaline peroxide mechanical pulp by carboxymethyl cellulose assisted refining, BioResources 8(2):2173-2185 (2013).
Yang, G., Lucica, L. A., Chen J., Cao X., and Liu Y., Effect of enzyme pretreatment on the beatability of fast growing poplar APMP pulp, BioResources 6(3):2568- 2580 (2011).
Baker, C., Refining Technology, Pira International Ltd., Surrey, p. 84 (2000).
Page, D. H., The beating of chemical pulp the action and effects, Fundamentals of Papermaking: Transaction of the 9th Fundamental Research Symposium, Mechanical Engineering Publications Ltd., London, pp. 1-38 (1989).
Young, J. H., Pulp and Paper and Chemistry and Chemical Technology, 3rd ed., Casey, J. P. (ed.), Vol. 2, Wiley-Interscience Pubilcation, New York, p. 882 (1981).
Manfredi, V., Evaluation of refining strategies for combine use of softwood and eucalyptus pulp in papermaking, Proceedings of 2006 Pan Pacific Conference, Vol 1, Seoul, pp. 37-42 (2006).
Lumiainen, J. J., Specific surface load theory and Conflo refiner concept, Proceedings of PIRA Conference "Current and Future Technologies of Refining", Pira International Ltd., Birmingham, pp. 10-12 (1991).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.