본 연구는 인화성 액체를 특정 용기에 담유하고 구획된 공간에서 연소 실험을 실시하여 연소 패턴을 분석하는 데 있다. 담유 실험에 사용된 용기는 깊이 20 mm, 넓이 150 mm의 플라스틱이다. 화염이 착화되어 연소되는 과정은 디지털카메라(digital camera) 및 비디오카메라(video camera)를 이용하여 확보하였다. 화염이 최성기에 도달하는 속도는 벤젠이 가장 빠르고 약 60 s이다. 반면 가장 늦게 것은 알코올이었으며 약 360.0 s로 6배 정도 차이가 있었다. 화염이 최성기에 도달하였을 때 플라스틱 용기와 인화성 액체가 동시에 연소됨에 따라 연기는 대부분 검정색이었다. 연소가 완료된 후유증 검지관(crime investigation tube)을 이용하여 유증을 조사한 결과 대두유를 제외한 모든 인화성 물질에서 유증 채취가 가능했다. 즉, 연소 물질의 종류에 따라 화재의 확산 속도 및 패턴 등에 큰 차이가 있다는 것을 알 수 있었다.
본 연구는 인화성 액체를 특정 용기에 담유하고 구획된 공간에서 연소 실험을 실시하여 연소 패턴을 분석하는 데 있다. 담유 실험에 사용된 용기는 깊이 20 mm, 넓이 150 mm의 플라스틱이다. 화염이 착화되어 연소되는 과정은 디지털카메라(digital camera) 및 비디오카메라(video camera)를 이용하여 확보하였다. 화염이 최성기에 도달하는 속도는 벤젠이 가장 빠르고 약 60 s이다. 반면 가장 늦게 것은 알코올이었으며 약 360.0 s로 6배 정도 차이가 있었다. 화염이 최성기에 도달하였을 때 플라스틱 용기와 인화성 액체가 동시에 연소됨에 따라 연기는 대부분 검정색이었다. 연소가 완료된 후유증 검지관(crime investigation tube)을 이용하여 유증을 조사한 결과 대두유를 제외한 모든 인화성 물질에서 유증 채취가 가능했다. 즉, 연소 물질의 종류에 따라 화재의 확산 속도 및 패턴 등에 큰 차이가 있다는 것을 알 수 있었다.
The purpose of this study is to analyze combustion patterns by filling a specific container with a flammable liquid and performing combustion tests in a divided space. The container used for the test is made of plastic, 20 mm in depth and 150 mm in width. After the liquid was ignited, its combustion...
The purpose of this study is to analyze combustion patterns by filling a specific container with a flammable liquid and performing combustion tests in a divided space. The container used for the test is made of plastic, 20 mm in depth and 150 mm in width. After the liquid was ignited, its combustion process was photographed using a digital camera and video camera. It was found that in the case of benzene, the flame reached its peak at the fastest speed about 60 s while in the case of alcohol, the flame reached its peak at the lowest speed about 360 s, which is approximately six times slower than the benzene. In most cases, when the flame reached its peak, smoke generated was dark as the plastic container and flammable liquid were combusted simultaneously. After completion of the combustion, it was possible to sample oil vapor from all flammable liquids excluding soybean oil as a result of the examination of oil vapor using a crime investigation tube. That is, it can be seen that there is significant difference in flame propagation speed, pattern, etc., depending on the combustible substances.
The purpose of this study is to analyze combustion patterns by filling a specific container with a flammable liquid and performing combustion tests in a divided space. The container used for the test is made of plastic, 20 mm in depth and 150 mm in width. After the liquid was ignited, its combustion process was photographed using a digital camera and video camera. It was found that in the case of benzene, the flame reached its peak at the fastest speed about 60 s while in the case of alcohol, the flame reached its peak at the lowest speed about 360 s, which is approximately six times slower than the benzene. In most cases, when the flame reached its peak, smoke generated was dark as the plastic container and flammable liquid were combusted simultaneously. After completion of the combustion, it was possible to sample oil vapor from all flammable liquids excluding soybean oil as a result of the examination of oil vapor using a crime investigation tube. That is, it can be seen that there is significant difference in flame propagation speed, pattern, etc., depending on the combustible substances.
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
문제 정의
따라서 본 연구에서는 인화성 액체를 특정 용기(polyvinyl chloride)에 담아서 방·실화가 발생하였을 때 화재조사관이 어떤 방법으로 화재를 조사하고 원인을 분석할 것인지에 대한 객관적 기초 자료를 제공하는 데 있다. 실험은 구획된 공간에서 실시되었고 연소 과정은 디지털카메라를 이용하여 촬영하였으며, 연소가 완료된 패턴 및 유류의 증기(유증) 등을 해석하였다.
제안 방법
담유 실험(contained oil test)의 신뢰성과 객관적 근거를 확보하기 위해 흘림 실험(oil flow test)과 동일한 구획 공간 및 조건에서 실시하였다. 즉, 방화범이 방화를 할 때 대부분 용기(PVC; polyvinyl chloride)에 인화성 액체를 담유하여 화재를 유발시키므로 그와 유사한 사례를 고려하여 실험이 진행되었다.
따라서 본 연구에서는 인화성 액체를 특정 용기(polyvinyl chloride)에 담아서 방·실화가 발생하였을 때 화재조사관이 어떤 방법으로 화재를 조사하고 원인을 분석할 것인지에 대한 객관적 기초 자료를 제공하는 데 있다. 실험은 구획된 공간에서 실시되었고 연소 과정은 디지털카메라를 이용하여 촬영하였으며, 연소가 완료된 패턴 및 유류의 증기(유증) 등을 해석하였다.
인화성 액체를 특정 용기에 담유하여 구획된 공간에서 연소 실험을 실시하여 연소 패턴, 화염의 최성기 도달 시간 및 연소가 완료된 잔류 유증을 분석하여 다음과 같은 결과를 얻었다.
대상 데이터
그러므로 용기의 연소에 따라 화염의 확산 및 전파 등의 차이가 있음을 전재하여 실험이 진행되었다. 구획된 공간은 가로, 세로, 높이가 각각 2,000 mm이며, 아연도금강판으로 제작한 것이다. 담유 실험에 사용된 인화성 액체는 휘발유(gasoline), 등유(kerosene), 경유(diesel), 시너(thinner), 벤젠(benzene), 아세톤(acetone), 알코올 (alcohol), 대두유(bean oil)이다(7,8).
Figure 1은 인화성 담유 실험에 사용된 용기의 개략도이다. 깊이 20 mm, 넓이 150 mm의 플라스틱 용기에 100 ml의 액체를 각각 담은 후 1,000 mm2 장판 위에 올려놓고 무풍의 조건에서 그릇 내의 액체에 직접 착화시켜 화염이 그릇 밖의 가연물에 착화 되기까지의 시간과 화염의 패턴 등을 디지털카메라(Digital Camera, Nikon Co., D-80, Japan) 및 비디오카메라(Video Camera, Samsung Co., SV-U10, Korea)를 사용하여 영상을 확보하였다. 촬영된 영상 분석을 통해서 화염이 가장 크게 성장되었을 때를 연소의 최성기로 해석하였다.
구획된 공간은 가로, 세로, 높이가 각각 2,000 mm이며, 아연도금강판으로 제작한 것이다. 담유 실험에 사용된 인화성 액체는 휘발유(gasoline), 등유(kerosene), 경유(diesel), 시너(thinner), 벤젠(benzene), 아세톤(acetone), 알코올 (alcohol), 대두유(bean oil)이다(7,8). Figure 1은 인화성 담유 실험에 사용된 용기의 개략도이다.
성능/효과
(1) 실험에 적용된 인화성 액체 중에서 화염이 최성기에도달하는 속도가 가장 빠른 것은 벤젠이었고 약 60 s이다. 반면 가장 늦게 최성기 도달한 것은 알코올이었으며 약 360.
(2) 화염이 최성기에 도달하였을 때 플라스틱 용기와 인화성 액체가 동시에 연소됨에 따라 연기는 대부분 검정색을 나타냈고, 쇠퇴기에는 농도가 낮아지고 흰색을 나타내는 것을 알 수 있었다.
(3) 최초 착화가 발생한 곳에 탄화 심도가 형성되었으며, 2차 화염에 의한 탄화 패턴은 상대적으로 적게 형성되는 것을 알 수 있었다. 또한 연소가 완료된 즉시 유증 검지관을 이용하여 유증을 조사한 결과 대두유를 제외한 모든 인화성 물질에서 유증 채취가 가능했으며, 잔류 유증은 갈색으로 확인되었다.
(4) 대두유는 일반 화염에 의해 착화가 되지 않았고, 대두유를 수납한 플라스틱 용기의 연소가 진행되어도 대두유는 착화되지 않는 것으로 확인되었다.
(3) 최초 착화가 발생한 곳에 탄화 심도가 형성되었으며, 2차 화염에 의한 탄화 패턴은 상대적으로 적게 형성되는 것을 알 수 있었다. 또한 연소가 완료된 즉시 유증 검지관을 이용하여 유증을 조사한 결과 대두유를 제외한 모든 인화성 물질에서 유증 채취가 가능했으며, 잔류 유증은 갈색으로 확인되었다.
0 s이다. 즉, 벤젠과 알코올의 연소 확산 속도가 6배정도 차이가 있다는 것을 알 수 있었다.
참고문헌 (11)
C. S. Choi, H. W. Kim, K. S. Lee, Y. S. Lim, C. H. Lee and J. H. Chung, "Electrical Fire Engineering", Honghwa Technology Publishing Co., pp. 171-173 (2004).
S. H. Lee, "Theory and Business of Fire Investigation", Honghwa Technology Publishing Co., pp. 75-80 (2009).
M. G. Zabetakis, "Flammability Characteristics of Combustible Gases and Vapours", U. S. Department of Mines, Bulletin 627 (1965).
P. Villagran, V. Lenck-Santini, P. Save and E. Poucet, "Properties of Place Cell Firing after Damage to the Visual Cortex", The European Journal of Neuroscience, pp. 771-776 (2002).
J. S. Kim, S. W. Baek and C. R. Kaplan, "Effect of Radiation on Diffusion Flame Behaviour Over a Combustible Solid", Combustion Science and Technology, p. 133 (1993).
W. J. Sheu, H. C. Shia and N. C. Liou, "Ignition Length of Laminar Combustible Pipe Flows", Combustion Science and Technology, pp. 451-460 (1998).
Korean Dangerous Center, "Dangerous Handbook", Daewoong Publishing Co. (1993).
J. H. Hyun, "Qualitative Analysis of Some Kinds of Petroleum (Thinner, Gasoline, Kerosene, and Diesel Oil) by Gas Chromatography", Analysis Science & Technology, pp. 512-518 (2006).
H. S. Joe, "Study on the Flame Propagation Speed of Flammable Liquids and Patterns of Damage by Fire", Jeonju University, pp. 22,48-63 (2013).
C. S. Choi and H. S. Joe, "Flame Propagation Rate of Flammable Liquid by Oil Flow Test Experiment of Division Fire", Proceeding of 2014 Spring Annual Conference (KIFSE), Daegu EXCO, pp. 145-146 (2014).
N. Kakae, T. Tsuchihashi, Y. Tanaka, Y. Ohmiya and K. Harada, "Influence of Combustible Dimension and Density on Heat Release Rate Part 2 Relation between Combustible Dimension, Maximum Heat Release Rate and Duration of Maximum Burning", Fire Science and Technology, pp. 491-496 (2007).
※ AI-Helper는 부적절한 답변을 할 수 있습니다.