최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기대한토목학회논문집 = Journal of the Korean Society of Civil Engineers, v.34 no.5, 2014년, pp.1505 - 1516
박성식 (경북대학교 공과대학 건설환경에너지공학부) , 이준우 (쌍용시멘트)
In this study, a cylinder embedded within cemented soils was used to cause directly tensile failure of cemented soils. An existing dumbbell type direct tensile test and a split tensile test that is most general indirect tensile test were also carried out to verify the developed built-in cylinder ten...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
흙의 인장강도가 중요한 이유는 무엇입니까? | 흙의 인장강도는 흙의 종류와 포화도에 따라 그 크기가 수십에서 수백 kPa에 이르기 때문에 다양한 지반구조물의 안정성과 성능에 중요한 영향을 미칠 수 있다. 특히, 도로포장이나 흙댐의 경우 재료의 인장강도와 관련된 균열파괴가 자주 발생하며, 지반공학 내에서 발생하는 여러 문제가 흙의 인장강도와 관련 있다. | |
시멘트 혼합토는 무엇이며 어떻게 사용됩니까? | , 1972), Hobbs(1963)도 공시체 직경방향으로 압축력을 가하면 공시체 중심부에 작용하는 압축응력의 영향으로 순수 인장응력을 구하는 것이 어렵다고 지적하였다. 시멘트 혼합토는 흙이나 모래에 시멘트를 섞은 것으로 흙 입자간의 고결작용으로 건조 시 흙의 체적변화를 감소시키거나 강도를 증가시켜 기초지반 및 연약지반의 보강, 옹벽 뒤채움재, 도로 및 철도의 성토노반, 기층재료 등으로 사용되고 있다. 몇몇 연구자에 의해 시멘트 혼합토의 인장강도 특성에 관한 연구가 수행되었으며, Hudson and Thomas (1968)는 시멘트 함량, 양생방법에 따라 간접인장강도는 압축강도의 14-16%의 범위라고 하였으며, 직접인장강도는 간접인장강도보다 15% 크다고 하였다. | |
기존의 흙에 대한 직접인장시험법이 가지는 단점은 무엇입니까? | 흙에 대한 직접인장시험법은 아령모양(Dumbbell type)의 공시체를 제작하여 양단에서 직접 인장력을 가하여 실험하는 방법이 있다. 하지만 공시체를 시험기에 장착할 때 양단부를 연결하기 어려울 뿐만 아니라 콘크리트나 암석에 비해 강도가 약해 연결부에서 파괴되는 경우도 자주 발생한다. 이와 같이 기존의 직접인장시험법은 공시체 제작이나 시험이 어려워 원기둥 공시체를 눕혀서 하중을 가하는 간접인장시험법이 주로 사용되고 있으며, 콘크리트 분야에서는 쪼갬인장시험(Split tensile test), 암석에는 압열인장시험(Brazilian test)이라 한다. |
Adepegba, D. (1971). "A test for validity of indirect tension tests of stabilized soils." Journal of Materials, Vol. 6, No. 3, pp. 555-575.
Allen, A. (2001). "Contaminant landfills: The Myth of Substantiality." Engineering Geology, Vol. 60, pp. 3-19.
Bieniawski, Z. T. and Hawkes, I. (1978). "Suggested methods for determining the tensile strength of rock materials; Parts II. ISRM commission on standardization of laboratory and field tests." Int. J Rock Mech Min Sci. Geomech Abstr, Vol. 15, pp. 102-103.
Carniero, F. B. and Barcellos, A. (1953). "Tensile strength of concretes." RILEM Bulletin, No. 13, pp. 97-123.
Fang, H. Y. and Fernandez, J. (1981). "Determination of tensile strength of soils by unconfined-penetration test." ASTM ATP 740, pp. 130-144.
Frydman, S. (1964). "The applicability of the Brazilian (indirect tension) test to soils." Aust. J. Appl. Sci, Vol. 15, pp. 335-343.
George, K. P. (1970). "Theory of brittle fracture applied to soil cement." Jour. of Soil Mech. and Found. Div., Proc. ASCE, Vol. 96, No. SM3, pp. 991-1010.
Griffith, A. A. (1924). "Theory of rupture." Proc. 1st. Int. Congr. Applied Rock Mechanics, Delft, pp. 55-63.
Hobbs, D. W. (1963). "A simple method for assessing the uniaxial compressive strength of rock." Int. J. Rock Mech. Min. Sci, Vol. 1, pp. 5-15.
Hondros, J. R. (1959). "The evaluation of poisson's ratio and the modulus of materials of a low tensile resistance by the Brazilian (indirect tensile) test with particular reference to concrete." Aust. J. Appl. Sci, Vol. 10, pp. 243-268.
Hudson, J. A., Brown, E. T. and Rummel, F. (1972). "The controlled failure of rock discs and rings loaded in diametral compression." Int. J. Rock Mech Min, Vol. 9, pp. 241-248.
Hudson, W. R. and Thomas W. K. (1968). "An indirect tensile test for stabilized materials, Research Report No. 98-1." Center for Highway Research, The University of Texas at Austin.
ISRM (1979). "Suggested methods for determining the uniaxial compressive strength and deformability of rock materials." Int. J. Rock Mech. and Min. Sci. & Geomech. Abstr, Vol. 16, No. 2, pp. 135-140.
Kim, Y. C., Shin, J. W. and Son, S. M. (2009). "An experimental study of the king sejong station and siberian frozen soils." Journal of Geotechnical and Geoenvironmental Engineering, Vol. 10, No. 2, pp. 5-12 (in Korean).
KS F 2405 (2010). "Standard test method for compressive strength of concrete." Korean Industrial Standards (in Korean).
Lee, K. R. and Kim, J. W. (1995). "A study on tensile strength of rock by ring test." J. Ind. Sci., Chongju Univ, Vol. 13 (in Korean).
Obert, L. and Duvall, W. I. (1967). Rock mechanics and the design of structures in rock, John Wiley and Sons, New York, pp. 94-98.
Park, S. K. (1997). "Investigation of the correlation between the compressive and the tensile strength of concrete." J. Ind, Sci., Seonggyungwan Univ, Vol. 48, No. 1 (in Korean).
Patent No. 10-1327018 (2013). "Tension test apparatus having tension test device and method for tension test." (in Korean).
Slate, F. O., Nilson, A. H. and Martinez, S. (1986). "Mechanical properties of high-strength lightweight concrete." ACI Journal, Vol. 83, No. 4, pp. 606-613.
Spencer, E. (1968). "Effect of tension of stability of embankment. Journal of the Soil Mechanics and Foundation Division." ASCE, Vol. 94, No. SM5, pp. 1159-1173.
Suklje, L. (1969). "Rheological aspects of soil mechanics." Wiley Interscience, pp. 456-473.
Zhang, M. H. and Gjorv, O. E. (1991). "Mechanical properties of high-strength lightweight concrete." ACI Materials Journal, Vol. 88, No. 3, pp. 240-247.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.