최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Nuclear engineering and technology : an international journal of the Korean Nuclear Society, v.46 no.5, 2014년, pp.655 - 666
Yoon, Han Young (Korea Atomic Energy Research Institute) , Lee, Jae Ryong (Korea Atomic Energy Research Institute) , Kim, Hyungrae (Korea Atomic Energy Research Institute) , Park, Ik Kyu (Korea Atomic Energy Research Institute) , Song, Chul-Hwa (Korea Atomic Energy Research Institute) , Cho, Hyoung Kyu (Department of Nuclear Engineering, Seoul National University) , Jeong, Jae Jun (School of Mechanical Engineering, Pusan National University)
The CUPID code has been developed at KAERI for a transient, three-dimensional analysis of a two-phase flow in light water nuclear reactor components. It can provide both a component-scale and a CFD-scale simulation by using a porous media or an open media model for a two-phase flow. In this paper, r...
J. J. Jeong, K. S. Ha, B. D. Chung, and W. J. Lee, "Development of a multi-dimensional thermal-hydraulic system code, MARS 1.3.1," Annals of Nuclear Energy, vol. 26, no. 18, pp. 1611-1642 (1999).
D. R. Lilies and W. H. Reed, "A semi-implicit method for two-phase fluid dynamics," Journal of Computational Physics, vol. 26, pp. 390-407 (1978).
M. Robert, M. Farvacque, M. Parent, and B. Faydide, "CATHARE 2 V2.5: A Fully Validated CATHARE, Version for Various Applications," Proc. 10th Int. Topl. Mtg. Nuclear Reactor Thermal Hydraulics (NURETH 10), Seoul, Republic of Korea, October 5-9, 2003.
P. Coste, J. Lavieville, J. Pouvreau, C. Baudry, M. Guingo, and A. Douce, "Validation of the Large Interface Model of NEPTUNE_CFD 1.0.8 for Pressurized Thermal Shock (PTS) applications," Nuclear Engineering and Design, vol. 253, pp. 296-310 (2012).
L. S. Caretto, A. D. Gosman, S. V. Patankar, D. B. Spladding, "Two calculation procedures for steady, three-dimensional flows with recirculation," Proc. 3rd Int. Conf. Numerical Methods in Fluid Dynamics, Paris, France 1972.
H. Y. Yoon, J. J. Jeong, H. K. Cho, Y. S. Bang, K. W. Seul, "A Multi-scale analysis of the transient behavior of an advanced safety injection Tank," Annals of Nuclear Energy, vol. 62, pp. 17-25 (2013).
H. K. Cho, S. J. Lee, H. Y. Yoon, K.-H. Kang, and J. J. Jeong, "Simulation of single- and two-phase natural circulation in the passive condensate cooling tank using the CUPID code," Journal of Nuclear Science and Technology, vol. 50, no. 7, pp. 709-722 (2013).
OpenMP Architecture Review Board, OpenMP Application Program Interface, version3.1 (2011).
M. Snir, S. Otto, S. Huss-Lederman, D. Walker, and J. Dongarra, MPI: The Complete Reference, the MIT Press (1996).
I. K. Park, J. R. Lee, S. W. Lee, H. Y. Yoon, and J. J. Jeong, "An implicit code coupling of 1-D system code and 3-D in-house CFD code for multi-scaled simulations of nuclear reactor transients," Annals of Nuclear Energy, vol. 59, pp. 80-91 (2013).
L. W. Keeton, A. K. Singhal, and G. S. Srikantiah, "ATHOS3 Mod-01: A computer program for thermal-hydraulic analysis of steam generator, volume 1: Mathematical and physical models and method of solution (revision 1)," Technical Report NP-4604-CCML, EPRI (1990).
G. Karypis and V. Kumar, "Multilevel k-way Partitioning Scheme for Irregular Graphs," J. Parallel Distrib. Comput. vol. 48, no. 1, pp. 96-129 (1998).
A. Gupta, V. Kumar and A. Sameh, "Performance and scalability of preconditioned conjugate gradient methods on parallel computers", IEEE Transactions on Parallel and Distributed System, vol. 6, no. 5, pp. 455-469 (1995).
N. Kurul, M. Z. Podowski, "On the modeling of multidimensional effects in boiling channels," ANS Proceedings of 27th National Heat Transfer Conference, Minneapolis, MN, USA, 1991.
S. Kim, B.-U. Bae, Y.-J. Cho, Y.-S. Park, K.-H. Kang, B.- J. Yun, "2013. An experimental study on the validation of cooling capability for the passive auxiliary feedwater system (PAFS) condensation heat exchanger," Nuclear Engineering and Design, vol. 260, pp. 54-63 (2013).
J. W. Heistand and J. G. Thakkar, "ATHOS and FLOW3 simulation of the FRIGG heated rod bundle experiment," Technical Report NP-3514, EPRI (1984).
KAERI Thermal Hydraulic Safety Research Division, "MARS code manual volume V: Models and correlations," Technical Report KAERI/TR-3872/2009, KAERI (2009).
W. H. Kays and A. L. London, "Compact Heat Exchangers", 2nd ed., McGraw Hill, New York (1964).
E. D. Grimison, "Correlations and Utilization of New Data on Flow Resistance and Heat Transfer for Cross Flow of Gases over Tube Banks," ASME Trans., vol. 59, p. 583 (1937).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.