최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.38 no.11, 2014년, pp.1207 - 1214
제진호 (고려대학교 기계공학부) , 김동준 (고려대학교 기계공학부) , 김윤재 (고려대학교 기계공학부)
Under excessive plasticity, the fracture toughness of a material depends on its size and geometry. Under fully yielded conditions, the stresses in a material near its crack tip are not unique but rather depend on the geometry. Therefore, the single-parameter J-approach is limited to a high-constrain...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
균열 선단의 응력장을 구하기 위해 주로 사용되는 것은? | 실제 균열 선단의 응력장을 구하기 위하여 주로 유한 요소 해석(Finite element analysis)이 이용된다. 소규모 항복(Small-sacle yielding)에서 Q-응력은 0에 근접하며 변형에 따라 음으로 작아진다. | |
Rice는 소성 변형을 뭐라고 가정했는가? | Rice(5)는 소성 변형을 비선형 탄성(Nonlinear elastic)으로 가정하여 에너지해방률(Energy release rate)을 도입할 수 있음을 확인하였고 인성이 매우 큰 재료의 균열 선단에서 거동을 특성화하는 변수, J를 제안하였다. Rice에 의하여 제안된 비선형 에너지 해방률은 선적분(Line integral)으로 표현되었으며, 이를 J-적분이라 정의하였다. | |
스트립항복 모델의 문제점은 무엇인가? | 이에 Irwin,(1) Dugdale,(2) Barenblatt(3)와 Wells(4)에 의하여 균열 선단에서의 항복에 대하여 보정하는 이론이 개발되었으며, 대표적으로 Irwin의 소성영역보정 (Effective crack size)과 Dugdale, Barenblatt의 스트립항복 모델(Strip yield model) 등이 있다. 그러나 이러한 방법은 선형 탄성 파괴역학의 단순한 확장에 불과하였으며, 파괴 인성(Fracture toughness) 이 매우 커서 소성 변형(Plastic deformation)과 균열면(Crack interfaces)이 벌어지는 경우 균열 선단 부근에서 소성역이 광범위하고 크게 발생하여 K 의 적용은 여전히 불가능 하였다. |
Irwin, G. R., 1961, "Plastic Zone Near a Crack and Fracture Toughness," Sagamore Research Conference Proceeding, Vol.4, pp. 63-78.
Dugdale, D. S., 1960, "Yielding in Steel Sheets Containing Slits," Journal of the Mechanics and Physics of Solids, Vol. 8, pp.100-104.
Wells, A. A., 1961, "Unstable Crack Propagation in Metal: cleavage and Fracture," Proceedings of the Crack Propagation Symposium, Vol. 1, p. 84.
Rice, J. R., 1968, "A Path Independent Integral and the Approximate Analysis of Strain Concentration by Notches and Cracks," Journal of Applied Mechanics, Vol. 53, pp. 379-386.
Huchinson, J. W., 1968, "singular Behavior at End of a Tensile Crack Tip in a Hardening Material," Journal of the Mechanics and Physics of Solids, Vol. 16, pp. 13-31.
Rice, J. R. and Rosengren, G. F., 1968, "Plane Strain Deformation near a Crack Tip in a Power-Law Hardening Material," Journal of the mechanics and Physics of Solids, Vol. 16, pp. 1-12.
McClintock, F. A., 1971, "Plasticity Aspects of Fracture," Fracture: An Advanced Treatise, Vol. 3, pp. 47-225.
Williams, M. L., 1957, "On the Stress Distribution at the Base of a Stationary Crack," Journal of Applied Mechanics, Vol. 24, pp. 109-114.
O'Dowd, N. P. and Shih, C. F., 1991, "Family of Crack-Tip Fields Characterized by a Triaxiality Parameter-I. Structure of Fields," Journal of the Mechanics and Physics of Solids, Vol. 39, pp. 898-1015.
O'Dowd, N. P. and Shih, C. F., 1992, "Family of Crack-Tip Fields Characterized by a Triaxiality Parameter-II. Fracture Applications," Journal of the Mechanics and Physics of Solids, Vol. 40, pp.939-963.
ABAQUS Version 6.13. User's Manual, 2013, Dassault Systems Simulia Corporation, USA.
Kim, Y. J., Kim, J. S., Cho, S. M., Kim, Y. J., 2004, "3-D Constraint Effects on J Testing and Crack Tip Constraint in M(T), SE(B), SE(T) and C(T) Specimens: Numerical Study," Journal of Engineering Fracture Mechanics, Vol. 71, pp. 1203-1218.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.