최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of welding and joining = 대한용접·접합학회지, v.33 no.6, 2015년, pp.36 - 41
김소연 (현대자동차 자동차강판개발TFT) , 공호영 (현대자동차 자동차강판개발TFT)
In the automotive industry, TWB hot stamping process is broadly adapted to reduce weight of the car and improve fuel efficiency. However, the process faces a problem of weakened strength of the welded zone after hot stamping process, due to the fact that Al-Si elements of the coating layer penetrati...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
핫스탬핑 공법이란 무엇인가? | 그러나 초고장력 강판의 냉간 성형성 저하로 인해 적용에 한계가 있어 이를 극복하기 위해 고강도와 고성형성을 동시 구현이 가능한 핫스탬핑 공법이 개발되었다1,2). 핫스탬핑 공법은 보론(B)을 소량 첨가한 강판(이하 보론강)을 오스테나이트 변태온도(AC3) 이상인 900℃ 이상의 고온으로 가열하고, 가열된 강판을 금형으로 성형 및 급속 냉각시켜 1400MPa급의 고강도를 확보할 수 있는 공법이다. 또한, 경량화 및 충돌성능 향상을 목적으로 부품 요구특성에 따라 차등두께 및 차등강도 소재를 레이저 용접한 TWB (Tailor Welded Blanks) 소재를 적용하여 핫스탬핑 공법으로 성형하는 하이브리드 기술이 개발되었다. | |
용접부 물성의 신뢰성 확보가 중요한 이유는? | TWB 핫스탬핑 공법은 성형 이전에 레이저 용접을 하게 되므로, 열처리 후 용접부 물성의 신뢰성 확보가 중요하다. 특히, 열처리 중 산화 및 탈탄 방지를 목적으로 미리 도금된 보론강 표면의 Al-Si도금층이 용접공정 중 용접부 내부로 혼입되어 용접부 강도를 저하시킨다는 연구결과가 있다4). | |
핫스탬핑 공정에서 소재의 이송시간이 길어지면 어떻게 되는가? | 핫스탬핑 공정에서 소재가 가열로에서 나와 프레스 시작 직전까지의 소요시간을 소재 이송시간이라고 한다. 소재 이송시간이 길어지면 핫스탬핑 성형 시작온도가 낮아져, 마르텐사이트 조직 외 페라이트와 베이나이트 조직 분율이 증가한다. |
Taylan Altan, Hot-stamping boron-alloyed steels for automotive parts, Process method and uses, Stamping Journal, Part 1, (2006)
H. Karbasian and A.E. Tekkaya, A review on hotstamping, Journal of Mater. Proc. Technology, 210 (2010)
W. Ehling, L. Cretteur, A. Pic, R. Vierstraete and Q. Yin, Development of a laser decoating process for fully functional Al-Si coated press hardened steel laser welded blank solutions, Proceeding of the 5th Int. WLT- conf. on LIM, (2009)
M.S.Kwon, Y.G.Kim, M.B.Moon, J.P.Kong and C.Y.Kang, Development of the New Technology for TWB and Hot Stamping Hybrid Process, 6th International Conference on Tube Hydroforming, (2013)
F.Briand and O.Dubet, hybrid Arc/Laser-Welding Method for Aluminized Steel Parts Using Gammagenic Elements and a Gas Containing Less Than 10% of Nitrogen Or Oxygen, Patent, US 2013-0098878
Nippon Steel and Sumitomo Metal Corporation, Tailored Blank For Hot Stamping, Hot Stamped Member, and Methods For Manufacturing Same, Patent, US 2015-0043962
M.Hiroshk, G.Hiroki, M.Yasuo, Weldment Produced By Beam Welding, Patent, US 5968672
S.Erturk, M.Sester, M.Selig, P.Feuser and K.Roll, A Thermo-Mechanical-Metallurgical FE Approach for Simulation of Tailored Tempering, Hot Sheet Metal Forming of High-Performance Steel CHS2,2011
IIHS, Side Impact Crashworthiness Evaluation Crash Test Protocol, Version
※ AI-Helper는 부적절한 답변을 할 수 있습니다.