최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.39 no.1, 2015년, pp.37 - 43
조혜진 (전남대학교 기계공학부) , 박통일 (전남대학교 기계공학부) , 박규해 (전남대학교 기계공학부)
Structural health monitoring (SHM) techniques based on the use of active-sensing piezoelectric (PZT) materials have received considerable attention. The validation of the PZT functionality during SHM operation is critical to successfully implementing a reliable SHM system. In this study, we investig...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
외부요인으로 인한 센서의 결함은 어떠한 문제를 일으키는가 | 실제 구조물에 부착되어있는 센서의 경우 온도, 날씨 등 다양한 외부요인으로부터 노출되어 있다. 외부요인으로 인한 센서의 결함은 SHM system 분석결과에 영향을 주며, 구조물의 상태진단에 있어 정확도 및 신뢰성 문제를 야기할 수있다. 따라서 센서 자체의 성능을 사전에 파악하고, 센서의 잔존수명 및 손상을 진단하는 센서 자가 진단 절차는 SHM의 신뢰성 증대를 위해 매우 중요한 절차이다. | |
압전소자는 어디에 주로 사용되는가 | 따라서 다양한 국부적 구조 모니터링 기법에 대한 연구가 국내외 많은 연구자들에 의해 활발하게 진행되고 있다.(1) 압전소자(Piezoelectric transducer, PZT)는 구조 건전성 모니터링 기법에 센서(Sensor) 및 구동기(actuator)로 많이 활용되고 있으며, 일반적으로 대형구조물의 건전성 모니터링에는 많은 수의 압전 센서와 actuator를 필요로 한다.(2) | |
무엇을 방지하기 위해 구조 건전성 모니터링 기법이 요구되는가 | 구조물에 발생된 손상을 적절한 시기에 감지하지 못한다면 재정적인 혹은 인명적인 피해가 발생할 수 있다. 이를 방지하기 위하여 구조물의 손상 및 결함을 조기에 감지하고 적절하게 유지 보수할 수 있는 구조 건전성 모니터링(structural health monitoring, SHM) 기법이 요구되고 있다. |
Farrar, C. R. and Worden, K., 2006, "An Introduction to Structural Health Monitoring," Mathematical Physical & Engineering Sciences, pp. 303-315.
Park, G., Farrar, C. R., Lanza di Scalea, F. and Coccia, S., 2006, "Performance Assessment and Validation of Piezoelectric Active Sensors in Structural Health Monitoring," Smart Materials and Structures, 15(6), pp. 1673-1683.
Kerschen, G., De Boe, P., Golincal, J. and Worden, K., 2005, "Sensor Validation Using Proncipal Component Analysis," Smart Materials and Stirctures, 14, pp. 36-42.
Giurgiutiu, V., Zagrai, A. N. and Bao, J. J., 2002, "Piezoelectric Wafer Embedded Active Sensors for Aging Aircraft Structural Health Monitoring," Journal of Structural Health Monitoring, 1, pp. 41-61.
Xu, Y. G. and Liu, G. R., 2002, "A Modified Electro-Mechanical Impedance Model of Piezoelectric Actuator-Sensors for Debonding Detection of Composite Patches," Journal of Intelligent Materail Systems and Structures, Vol. 13, pp. 389-396.
Park, G., Farrar, C. R., Rutherford, A. C. and Robertson, A. N., 2006, "Piezoelectric Active Sensor Self-Diagnostics Using Electrical Admittance Measurements," ASME Journal of Vibration and Acoustics, Vol.128, pp. 469-476.
Fabricio, G. B., Dannilo, E. B., Vinicius, A. D. and Jose, A. C. U., 2014 "An Experimental Study on the Effect of Temperature on Piezoelectric Sensors for Impedance-Based Structural Health Monitoring," Sensors 2014, 14(1), pp. 1208-1227.
Bhalla, S. and Moharana, S., 2013, "Modeling of Piezo-Bond Structure System for Structural Health Monitoring Using EMI Technique," Key Engineering Materials, Vol. 569-570.
Grisso, B. L. and Inman, D. J., 2010, "Temperature Corrected Sensor Diagnostics for Impedance-Based SHM," Journal of Sound and Vibration, Vol 329, pp. 2323-2336.
Park, S., Ahmad, S., Yun, C. B. and Rod, Y., 2006, "Multiple Crack Detection of Concrete Structures Using Impedance-based Structural Health Monitoring Techniques," Society for Experimental Mechanics, 46, pp. 609-618
Park, G., Shon, H., Farrar, C. R. and Inman, D. J., 2003, "Overview of Piezoelectric Impedance-Based Health Monitoring and Path Forward," Shock Vibr Dig, 35(6), pp. 451-463.
Sun, F. P., Chaudhry, Z., Liang, C. and Rogers, C. A., 1995, "Truss Structure Integrity Identification Using PZT Sensor-Actuator," J. Intell. Mater. Syst. Struct., Vol. 6, pp. 134-139.
Saint-Pierre, N., Jayet, Y., Perrissin-Fabert, I., and Baboux, J. C., 1996, "The Influence of Bonding Defects on the Electric Impedance of a Piezoelectric Embedded Element," J. Phys. D: Appl. Phys., Vol. 29, pp. 2976-2982.
Bhalla, S. and Soh, S. K., 2004, "Electromechanical Impedance Modeling for Adhesively Bonded Piezo-Transducers," J.Intell. Mater. Syst. Struct, 15, pp. 955-972.
Bhalla, S. and Moharana, S., 2013, "A Refined Shear Lag Model for Adhesively Bonded Piezo-Impedance Transducers," Journal of Intelligent Material Systems and Structures, Vol. 24, pp. 33-48.
Sirohi, J. and Chopra, I., 2000, "Fundamental Behavior of Piezoceramic Sheet Actuators," J. Intell. Mater. Syst. Struct., Vol. 11, pp. 47-61.
Overly, R. G., Park, G. and Farinholt, K. M., 2009, "Piezoelectric Active-Sensor Diagnosics and Validation Using Instantaneous Baseline Data", IEEE Sensors Journal, Vol. 9, pp. 1414-1421.
Baptista, F. G., Budoya, D. E., de Almeida, V. A. D. and Ulson, J. A. C., 2014, "An Experimental Study on the Effect of Temperature on Piezoelectric Sensors for Impedance-Based Structural Health Monitoring," Sensors 2014, 14, pp. 1208-1227.
Peairs, D. M., Park, G. and Inman, D. J., 2004, "Improving Accessibility of the Impedance-Based Structural Health Monitoring Method," Journal of Intelligent Material Systems and Structures, Vol. 15.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.