최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국추진공학회지 = Journal of the Korean Society of Propulsion Engineers, v.19 no.6, 2015년, pp.26 - 32
나성현 (School of Mechanical Design Engineering, Chungnam National University) , 최훈석 (School of Mechanical Design Engineering, Chungnam National University) , 오광근 (School of Mechanical Design Engineering, Chungnam National University) , 김재훈 (School of Mechanical Design Engineering, Chungnam National University)
In this study, it is evaluated for fracture toughness to analyze crack resistance properties of particulate reinforced composite propellant. Fracture toughness test using WST specimen is conducted by temperature conditions from
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
추진제의 기계적 특성을 분석하여 사용하는 이유는? | 입자강화 복합재료 형태로 제조된 추진제(이하‘추진제’)는 금속연료, 산화제 및 고분자 물질인 바인더가 결합되어 점탄성 특성을 나타내는 재료이다. 추진제는 최근 산업 여러 분야에서 다양하게 사용되기 때문에 기계적 특성을 분석하여 제작 과정, 제작 환경을 개선하는데 중점을 두고 있다. 추진제는 사용 용도에 따라서 다양한 그레인(grain)의 형상으로 제작된다. | |
입자강화 복합재료 형태로 제조된 추진제란? | 입자강화 복합재료 형태로 제조된 추진제(이하‘추진제’)는 금속연료, 산화제 및 고분자 물질인 바인더가 결합되어 점탄성 특성을 나타내는 재료이다. 추진제는 최근 산업 여러 분야에서 다양하게 사용되기 때문에 기계적 특성을 분석하여 제작 과정, 제작 환경을 개선하는데 중점을 두고 있다. | |
추진제의 제작시 그레인의 특징은? | 추진제는 사용 용도에 따라서 다양한 그레인(grain)의 형상으로 제작된다. 그레인은 운송,경화반응 중의 열적 변화, 점화 시 급격한 내부압력 상승 등의 내부 및 외부 요인에 의해 그레인의 취약부위에 응력이 집중하여 균열이 발생할 수 있다. 또한 균열의 발생에 의해 연소 표면적이 넓어져서 로켓 모터의 성능 저하가 발생할 수 있다. 결과적으로 추진제의 파괴 역학적 특성을 파악하는 것이 필수적인 요소이다[1]. |
Kim, C.K., Yoo, J.C., Hwang, G.S. and Yim, Y.J., "Properties of HTPB/AP/Butacene Propellants," Journal of the Korean Society of Propulsion Engineers, Vol. 9, No. 2, pp. 40-45, 2005.
Gao, G., Huang, S., Xia, K. and Li, Z., "Application of Digital Image Correlation (DIC) in Dynamic Notched Semi-Circular Bend (NSCB) tests," Experimental Mechanics, Vol. 55, No. 1, pp. 99-104, 2015.
Liu, C.T., "Crack Growth Behavior in a Solid Propellant," Engineering Fracture Mechanics, Vol. 56, No. 1, pp. 127-135, 1997.
Tussiwand, G.S., Saoirna, V.E., Terzenbach, R. and De Luca, L.T., "Fracture Mechanics of Composite Solid Rocket Propellant Grains: Material Testing," Journal of Propulsion and Power, Vol. 25, No. 1, pp. 60-73, 2009.
Zhang, H., Huang, G., Song. H. and Kang. Y, "Experimental Investigation of Deformation and Failure Mechanisms in Rock under Indentation by Digital Image Correlation," Engineering Fracture Mechanics, Vol. 96, pp. 667-675, 2012.
ASTM, Standard Test Method for Linear -Elastic Plane-Strain Fracture Toughness $K_{IC}$ of Metallic Materials, ASTM E399-09, Annual Book of ASTM Standards, ASTM International, Philadelpia, P.A., USA, pp. 1-33, 2009.
Liu, C.T., "The Effect of Micro Damage on Time-Dependent Crack Growth in a Composite Solid Propellant," Mechanics of Time-Dependent Materials, Vol. 1, No. 1, pp. 123-136, 1997.
Bohn, M.A. and Elsner, P., "Aging of the Binders GAP-N100 and HTPB-IPDI Investigated by torsion-DMA." Propellants, Explosives, Pyrotechnics, Vol. 24, No. 3, pp. 199-205, 1999.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.